Raspberry Pi Compute Module 3+ Lite SPARKFUN - オフィスサプライ>学童・教育用品>理科/技術/科学工作>プログラミング/ロボティクス -

https://www.monotaro.com/p/6401/0548/

2026/04/16 15:52:11

DEV-16830 Raspberry Pi Compute Module 3+ Lite SPARKFUN 64010548

SPARKFUN
Raspberry Pi Compute Module 3+ Lite

出荷目安：33日

33日出荷とは

注文コード	64010548
品番	DEV-16830
内容量	1個
参考基準価格(税別)	￥11,600

単価(税別)

￥10,980

特長：	Description The Raspberry Pi Compute Module 3+ Lite contains the guts of a Raspberry Pi 3 Model B+(the BCM2837 processor and 1GB LPDDR2 RAM). This module allows a designer to leverage the Raspberry Pi hardware and software stack in their own custom systems and form factors. In addition this module has extra IO interfaces over and above what is available on the Raspberry Pi model A/B boards， opening up more options for the designer. This is all integrated onto a small(67.6mm×31mm)board that fits into a standard DDR2 SODIMM connector. You get the full flexibility of the BCM2837 SoC(which means that many more GPIOs and interfaces are available than with a standard Raspberry Pi)， and designing the Module into a custom system should be relatively straightforward because all the tricky bits have been put onto the Module itself. The CM3+ Lite product is the same as CM3+ except the eMMC Flash is not fitted， and the SD/eMMC interface pins are available for the user to connect their own SD/eMMC device. Note that the CM3+ is electrically identical and， with the exception of higher CPU z-height， physically identical to the legacy CM3 products. Note：The CM3+ modules require a software/firmware image dated November 2018 or newer to function correctly. Features Broadcom BCM2837B0， Cortex-A53(ARMv8)64-bit SoC @ 1.2GHz 1GB LPDDR2 SDRAM Operating Supply Voltage：1.8V， 3.3V Minimum Operating Temperature：-25C Maximum Operating Temperature：+80C HDMI， MIPI， USB， and GPIO interfaces on edge connector
アズワン品番：	67-0423-17

特長：

Description
The Raspberry Pi Compute Module 3+ Lite contains the guts of a Raspberry Pi 3 Model B+(the BCM2837 processor and 1GB LPDDR2 RAM). This module allows a designer to leverage the Raspberry Pi hardware and software stack in their own custom systems and form factors. In addition this module has extra IO interfaces over and above what is available on the Raspberry Pi model A/B boards， opening up more options for the designer.
This is all integrated onto a small(67.6mm×31mm)board that fits into a standard DDR2 SODIMM connector. You get the full flexibility of the BCM2837 SoC(which means that many more GPIOs and interfaces are available than with a standard Raspberry Pi)， and designing the Module into a custom system should be relatively straightforward because all the tricky bits have been put onto the Module itself.
The CM3+ Lite product is the same as CM3+ except the eMMC Flash is not fitted， and the SD/eMMC interface pins are available for the user to connect their own SD/eMMC device. Note that the CM3+ is electrically identical and， with the exception of higher CPU z-height， physically identical to the legacy CM3 products.
Note：The CM3+ modules require a software/firmware image dated November 2018 or newer to function correctly.
Features
Broadcom BCM2837B0， Cortex-A53(ARMv8)64-bit SoC @ 1.2GHz
1GB LPDDR2 SDRAM
Operating Supply Voltage：1.8V， 3.3V
Minimum Operating Temperature：-25C
Maximum Operating Temperature：+80C
HDMI， MIPI， USB， and GPIO interfaces on edge connector

アズワン品番：

67-0423-17