SparkFun Digital Temperature Sensor - TMP102 Qwiic SPARKFUN - オフィスサプライ>学童・教育用品>理科/技術/科学工作>プログラミング/ロボティクス -

https://www.monotaro.com/p/6429/7338/

2026/05/22 10:55:15

SEN-16304 SparkFun Digital Temperature Sensor - TMP102 Qwiic SPARKFUN 64297338

SPARKFUN
SparkFun Digital Temperature Sensor - TMP102 Qwiic

出荷目安：33日

33日出荷とは

注文コード	64297338
品番	SEN-16304
内容量	1個
参考基準価格(税別)	￥2,410

単価(税別)

￥2,298

特長：	Description We all like to know the temperature， right? Well， with the SparkFun TMP102 Digital Temperature Sensor， we've made it just about as easy as it gets. Based on the original Digital Temperature Sensor Breakout TMP102， we've added Qwiic connectors to bring this board into our plug-and-play Qwiic Ecosystem and added an address jumper instead of breaking out the address pin. However， we still have broken out 0.1"-spaced pins in case you prefer to use breadboard. The TMP102 itself is an easy-to-use digital temperature sensor from Texas Instruments. While some temperature sensors use an analog voltage to represent the temperature， the TMP102 uses the I2C bus of the Arduino to communicate the temperature. The TMP102 is capable of reading temperatures to resolution of 0.0625℃， and is accurate up to 0.5℃. The breakout has built-in 4.7kΩ pull-up resistors for I2C communications and runs from 1.4V to 3.6V. I2C communication uses an open drain signaling， so there is no need to use level shifting. The SparkFun Qwiic Connect System is an ecosystem of I2C sensors， actuators， shields and cables that make prototyping faster and less prone to error. All Qwiic-enabled boards use common 1mm pitch， 4-pin JST connector. This reduces the amount of required PCB space， and polarized connections mean you can't hook it up wrong. Get Started with the Qwiic TMP102 Digital Temperature Sensor Guide Features Uses the I2C interface I2C Address：0x48 by default (Three additional addresses available， as well) 12-bit， 0.0625℃ resolution Typical temperature accuracy of ±0.5℃ 3.3V sensor Supports up to four TMP102 sensors on the I2C bus at time 2x Qwiic Connectors
アズワン品番：	67-0427-17

特長：

Description
We all like to know the temperature， right? Well， with the SparkFun TMP102 Digital Temperature Sensor， we've made it just about as easy as it gets. Based on the original Digital Temperature Sensor Breakout TMP102， we've added Qwiic connectors to bring this board into our plug-and-play Qwiic Ecosystem and added an address jumper instead of breaking out the address pin. However， we still have broken out 0.1"-spaced pins in case you prefer to use breadboard.
The TMP102 itself is an easy-to-use digital temperature sensor from Texas Instruments. While some temperature sensors use an analog voltage to represent the temperature， the TMP102 uses the I2C bus of the Arduino to communicate the temperature.
The TMP102 is capable of reading temperatures to resolution of 0.0625℃， and is accurate up to 0.5℃. The breakout has built-in 4.7kΩ pull-up resistors for I2C communications and runs from 1.4V to 3.6V. I2C communication uses an open drain signaling， so there is no need to use level shifting.
The SparkFun Qwiic Connect System is an ecosystem of I2C sensors， actuators， shields and cables that make prototyping faster and less prone to error. All Qwiic-enabled boards use common 1mm pitch， 4-pin JST connector. This reduces the amount of required PCB space， and polarized connections mean you can't hook it up wrong.
Get Started with the Qwiic TMP102 Digital Temperature Sensor Guide
Features
Uses the I2C interface
I2C Address：0x48 by default
(Three additional addresses available， as well)
12-bit， 0.0625℃ resolution
Typical temperature accuracy of ±0.5℃
3.3V sensor
Supports up to four TMP102 sensors on the I2C bus at time
2x Qwiic Connectors

アズワン品番：

67-0427-17