SparkFun IR Array Breakout - 55 Degree FOV， MLX90640 Qwiic SPARKFUN - オフィスサプライ>学童・教育用品>理科/技術/科学工作>プログラミング/ロボティクス -

https://www.monotaro.com/p/6864/3848/

2026/05/12 09:48:18

SEN-14844 SparkFun IR Array Breakout - 55 Degree FOV， MLX90640 Qwiic SPARKFUN 68643848

SPARKFUN
SparkFun IR Array Breakout - 55 Degree FOV， MLX90640 Qwiic

出荷目安：33日

33日出荷とは

注文コード	68643848
品番	SEN-14844
内容量	1個
参考基準価格(税別)	￥23,300

単価(税別)

￥22,980

特長：	Description It's time to say hip hip array for this IR Breakout! The MLX90640 SparkFun IR Array Breakout is equipped with a 32x24 array of thermopile sensors creating， in essence， a low resolution thermal imaging camera. With this breakout you can detect surface temperatures from many feet away with an accuracy of ±1.5℃(best case). To make it even easier to get your infrared image， all communication is enacted exclusively via I2C， utilizing our handy Qwiic system. However， we still have broken out 0.1"-spaced pins in case you prefer to use a breadboard. This specific IR Array Breakout features a 55°x35° field of view with a temperature measurement range of -40℃-300℃. The MLX90640 IR Array has pull up resistors attached to the I2C bus； both can be removed by cutting the traces on the corresponding jumpers on the back of the board. Please be aware that the MLX90640 requires complex calculations by the host platform so a regular Arduino Uno(or equivalent)doesn't have enough RAM or flash to complete the complex computations required to turn the raw pixel data into temperature data. You will need a microcontroller with 20，000 bytes or more of RAM. To achieve this， we recommend a Teensy 3.1 or above. The SparkFun Qwiic connect system is an ecosystem of I2C sensors， actuators， shields and cables that make prototyping faster and less prone to error. All Qwiic-enabled boards use a common 1mm pitch， 4-pin JST connector. This reduces the amount of required PCB space， and polarized connections mean you can't hook it up wrong. Get Started with the SparkFun IR Array Breakout Guide Features Operating Voltage：3V-3.6V Current Consumption：～18mA Field of View：55°x35° Measurement Range：-40℃-300℃ Resolution：±1.5℃ Refresh Rate：0.5Hz-64Hz I2C Address：0x33 2x Qwiic Connection Ports
アズワン品番：	67-0426-88

特長：

Description
It's time to say hip hip array for this IR Breakout! The MLX90640 SparkFun IR Array Breakout is equipped with a 32x24 array of thermopile sensors creating， in essence， a low resolution thermal imaging camera. With this breakout you can detect surface temperatures from many feet away with an accuracy of ±1.5℃(best case). To make it even easier to get your infrared image， all communication is enacted exclusively via I2C， utilizing our handy Qwiic system. However， we still have broken out 0.1"-spaced pins in case you prefer to use a breadboard.
This specific IR Array Breakout features a
55°x35°
field of view with a temperature measurement range of -40℃-300℃. The MLX90640 IR Array has pull up resistors attached to the I2C bus； both can be removed by cutting the traces on the corresponding jumpers on the back of the board. Please be aware that the MLX90640 requires complex calculations by the host platform so a regular Arduino Uno(or equivalent)doesn't have enough RAM or flash to complete the complex computations required to turn the raw pixel data into temperature data. You will need a microcontroller with 20，000 bytes or more of RAM. To achieve this， we recommend a Teensy 3.1 or above.
The SparkFun Qwiic connect system is an ecosystem of I2C sensors， actuators， shields and cables that make prototyping faster and less prone to error. All Qwiic-enabled boards use a common 1mm pitch， 4-pin JST connector. This reduces the amount of required PCB space， and polarized connections mean you can't hook it up wrong.
Get Started with the SparkFun IR Array Breakout Guide
Features
Operating Voltage：3V-3.6V
Current Consumption：～18mA
Field of View：55°x35°
Measurement Range：-40℃-300℃
Resolution：±1.5℃
Refresh Rate：0.5Hz-64Hz
I2C Address：0x33
2x Qwiic Connection Ports

アズワン品番：

67-0426-88