SparkFun Qwiic Shield for Teensy SPARKFUN - オフィスサプライ>学童・教育用品>理科/技術/科学工作>プログラミング/ロボティクス -

https://www.monotaro.com/p/6582/3155/

2026/06/16 02:34:47

DEV-17119 SparkFun Qwiic Shield for Teensy SPARKFUN 65823155

SPARKFUN
SparkFun Qwiic Shield for Teensy

大変申し訳ございませんが、只今品切れしております。
2026年12月上旬より順次出荷を予定しております。

注文コード	65823155
品番	DEV-17119
内容量	1個
参考基準価格(税別)	￥1,260

単価(税別)

￥1,198

特長:	Description The SparkFun Qwiic Shield for Teensy provides you with a quick and easy way to enter into SparkFun's Qwiic ecosystem with your Teensy boards. This shield is sized to work with the footprint of Teensy 4.0， Teensy 3.2， and Teensy LC. This shield connects the I2C bus(GND， 3.3V， SDA， and SCL)on your Teensy to four SparkFun Qwiic connectors(two horizontally and two vertically mounted). The Qwiic ecosystem allows for easy daisy chaining so， as long as your devices are on different addresses， you can connect as many Qwiic devices as you'd like. We have also added a "PROG" button on this shield that is electrically parallel with the "PROG" button on the Teensy Boards so you can choose to enter Programming mode using either the button on your Teensy or the button on the shield. The Qwiic Shield for Teensy comes with the Teensy Header Kit and you will need to solder the headers to the shield and， if necessary， to your Teensy board. Take care to match the markings on the Qwiic Shield to the appropriate pins on your Teensy to avoid possibly damaging your boards. The SparkFun Qwiic Connect System is an ecosystem of I2C sensors， actuators， shields and cables that make prototyping faster and less prone to error. All Qwiic-enabled boards use a common 1mm pitch， 4-pin JST connector. This reduces the amount of required PCB space， and polarized connections mean you can't hook it up wrong. Get Started with the SparkFun Qwiic Shield for Teensy Hookup Guide Features Teensy 4.0， 3.2， or LC Footprint Compatible 4x Qwiic Connection Ports "PROG" Button w/ satisfying tactile feedback I2C Jumper 3.3V and GND Buses
アズワン品番:	67-0423-21

特長:

Description
The SparkFun Qwiic Shield for Teensy provides you with a quick and easy way to enter into SparkFun's Qwiic ecosystem with your Teensy boards. This shield is sized to work with the footprint of Teensy 4.0， Teensy 3.2， and Teensy LC. This shield connects the I2C bus(GND， 3.3V， SDA， and SCL)on your Teensy to four SparkFun Qwiic connectors(two horizontally and two vertically mounted). The Qwiic ecosystem allows for easy daisy chaining so， as long as your devices are on different addresses， you can connect as many Qwiic devices as you'd like.
We have also added a "PROG" button on this shield that is electrically parallel with the "PROG" button on the Teensy Boards so you can choose to enter Programming mode using either the button on your Teensy or the button on the shield.
The Qwiic Shield for Teensy comes with the Teensy Header Kit and you will need to solder the headers to the shield and， if necessary， to your Teensy board. Take care to match the markings on the Qwiic Shield to the appropriate pins on your Teensy to avoid possibly damaging your boards.
The SparkFun Qwiic Connect System is an ecosystem of I2C sensors， actuators， shields and cables that make prototyping faster and less prone to error. All Qwiic-enabled boards use a common 1mm pitch， 4-pin JST connector. This reduces the amount of required PCB space， and polarized connections mean you can't hook it up wrong.
Get Started with the SparkFun Qwiic Shield for Teensy Hookup Guide
Features
Teensy 4.0， 3.2， or LC Footprint Compatible
4x Qwiic Connection Ports
"PROG" Button w/ satisfying tactile feedback
I2C Jumper
3.3V and GND Buses

アズワン品番:

67-0423-21