「purell」の検索結果

広範囲の細菌・ウィルスを殺菌、何度使ってもベトつきにくい優れた使用感です。 ジェルタイプ。指定医薬部外品。

工具なしで簡単にセットできます。 患者さん・利用者さんの手摺りの使用をさまたげません。 院内の手摺に、固定金具なしで使用できます。

忙しくて時間が無い方にぴったりの速乾性ジェルで、水やタオルが不要です。手荒れが心配な方にも皮膚を保護する成分入りで安心です。専用ディスペンサーの吐出量は1回約1.2ml。1本のカートリッジで約1000回の使用が可能です。□医薬部外品ゴージョーTFXオートディスペンサー専用1200mlカートリッジ吐出バルブ一体型のカートリッジは、まるごと交換するディスポーザブルタイプです。交換するたびに新品同様にリフレッシュできるので、目詰まりなどのトラブルが避けられます。大容量カートリッジで交換の手間が軽減できます。また使用済みカートリッジは小さくつぶせてゴミの減量にも役立ちます。

塩化ベンザルコニウムを配合した指定医薬部外品の手指の洗浄・消毒剤です。 非危険物で取り扱いやすいタイプです。

泡で出てくるので使いすぎを防ぎ、手指からの液だれも防ぎます。保湿成分を配合し、頻繁にお使いいただく方にも配慮しています。専用ディスペンサーの吐出量は1回約0.8ml。1本のカートリッジで約1，500回の使用が可能です。ゴージョーTFXオートディスペンサー専用1200mlカートリッジ吐出バルブ一体型のカートリッジは、まるごと交換するディスポーザブルタイプです。交換するたびに新品同様にリフレッシュできるので、目詰まりなどのトラブルが避けられます。大容量カートリッジで交換の手間が軽減できます。また使用済みカートリッジは小さくつぶせてゴミの減量にも役立ちます。

入口や人通りの多い場所やに設置し、入場前に手指消毒を行うのに最適なスタンドです。

効果的な配合バランスにより、強力な除菌効果を発揮します。 日常的な厨房や店舗、施設の衛生管理にご活用いただけます。 食品添加物ですので、食品に噴霧したり、浸漬・練り込みするといった使い方もできます。 調理済みの料理や加工食品の除菌・静菌に便利です。

感染予防の対策に! お肌にやさしいヒアルロン酸配合。

日常ケアの際の身体清拭、失禁・便などの拭き取りにご使用いただける清拭シートです。不織布素材の使い切り清拭シートです。清拭時に水を使用しないため、感染のリスクが低く、衛生的です。3種の保湿成分配合で拭きあがりがしっとりします。アルコールフリー・弱酸性で肌にやさしい処方設計です。オレンジオイル・洗浄成分配合で汚れを浮かせて肌にやさしく落とせます。メーカーの専用ホットウォーマー(別売)に温めて使用することができます。

殺菌成分イソプロピルメチルフェノールを配合した薬用ハンドソープ。 泡で汚れを落としながら手指を殺菌・消毒します。 無香料で泡立ちが良くさっぱりとした洗いあがりです。 大腸菌に対して高い殺菌効果を示します。

ペットボトルのネックに引っかけて持ち歩けます。

ウエストポーチ、ショルダータイプとしてご使用頂けます。 ポーチは洗濯して繰り返しご使用頂けます(洗濯用ネットに入れて洗濯してください)。

保湿成分配合の速乾性手指消毒剤の定番。液体タイプ・低アルコール・非危険物

水なしで、頑固な油・泥・インク等の汚れを拭くだけで素早くきれいに落とします。 大判サイズで手の汚れだけでなく、作業台・工具・換気扇など1枚で無駄なくお使いいただけます。 保湿成分配合で、手荒れのリスクを低減します。 水場のない現場での作業や出張先に最適。

アルコール濃度30%配合、ボックスウェットティッシュよりも大判サイズでしっかり拭ける。

通気性を追求した息楽フィルターを使用。呼吸がしやすく快適。極細繊維からなるフィルターを採用し、優れた捕集性能と呼吸のしやすさを両立しています。マスク中央に組み込んだスペースキーパーが口元に空間を作り、顔への圧迫感を軽減します。マスク上部に組み込んだ樹脂製ノーズブリッジを鼻に沿わせることで隙間からの漏れを軽減し、フィット感を高めています。ソフトなゴムひもを使用し、長時間使用する際の耳への負担を軽減します。使い捨てで衛生的です。部材に金属類を一切使用していないため、分別廃棄の手間を軽減できます。

グリース、タールや接着剤などの粘着性の油汚れを素早く落とすジェルタイプのクリーナーです。 2種類(アルカン/ シクロアルカン、硫酸化ヒマシ油)の洗浄成分を用いることで優れた洗浄力を実現。 スクラブ剤(軽石)を使用したジェルで、手の爪やシワまで行き届きます。 粘着性の高い油汚れだけでなく、接着剤やシリコンなど、しつこい汚れ落としに最適なポンプ式ハンドクリーナーです。

エタノールを有効成分とする速乾性の外皮消毒剤です。使いやすさを考慮してゲル状の製剤になりました。指定医薬部外品

無臭、低環境負荷のクリーン素材です。 耐熱性・タック性(吸着)に優れています。 微細なセル構造を有した環境に優しい無黄変フォームです。 加工しやすいです。

無臭、低環境負荷のクリーン素材です。 耐熱性・タック性(吸着)に優れています。 微細なセル構造を有した環境に優しい無黄変フォームです。 加工しやすいです。

フォントの販売支援・著作権管理活動を行うフォント・アライアンス・ネットワーク事務局が株式会社昭和書体の協力により、昭和書体の各フォントを企画製品化したものです。昭和書体は、株式会社昭和書体により書家「綱紀栄泉(つなのりえいせん)」の書き綴った毛筆諸本をデジタル化した毛筆書体です。その最大の特徴は毛筆書体独特のかすれやにじみをより忠実に再現したもので、直筆と見分けがつかないほどの本格的な毛筆書体です。本製品は昭和書体の基本とも言える書体をメインに和文、欧文合わせて131書体ものフォントを昭和書体初心向けにパッケージ化したものです。POP、ちらし、DM、飲食店メニュー、和風を表現する媒体やコンテンツなどにも幅広くご利用いただけます。収録内容:昭和書体和文フォント基本書体シリーズ15書体:昭和楷書/昭和行書/風神/龍神/花神/清龍/弥勒菩薩/普賢菩薩/文殊菩薩/勢至菩薩/地蔵菩薩/虚空蔵/観音菩薩/不動明王/孔雀明王。昭和書体欧文フォントシリーズ114書体:BlackBrush25書体/PurpleBrush25書体/GreenBrush24書体/YellowBrush14書体/PinkBrush25書体。特典『昭和書体高解像度書体』2書体:豪龍/如来 ※高解像度書体は、一般書体よりも約5から50倍のデータポイント数で表現されるかすれやにじみ具合を表現した毛筆書体です。直筆と見分けがつかないくらいの本格的な毛筆書体です。

UL E43149 and CSA LR26550Miniature relay for PA series printed circuit boardVery compact power relay (width: 5 mm)， designed for mounting on high-density printed circuit boards (with automatic output)Applications: relay interfaces for programmable controllers， relay outputs for measurement equipment， timers， hour meters， temperature regulators， portable equipment

EK-201 プロテクトエレクトリックグローブ12V バッテリーOFF時にもウインターグローブとして使用可能 電源取出し用のハーネス(3Aヒューズ付属)も同梱 最大消費電流(左右合計)2.0A/24W/DC12V 付属のグローブハーネスは別売り設定もあり(EK-203 / 1500(税抜)) MATERIALS [outshell]Polyester・Nylon・TPU・Goat Leathe・Polyurethane [lining]Polyester [insulation]Polyester [membrane]Polyurethane PROTECTOR knuckle・palm

UL E43149 and CSA LR26550Miniature relay for PA series printed circuit boardVery compact power relay (width: 5 mm)， designed for mounting on high-density printed circuit boards (with automatic output)Applications: relay interfaces for programmable controllers， relay outputs for measurement equipment， timers， hour meters， temperature regulators， portable equipment

JK-621 シュプリームプロテクトウィンタージャケット 透湿防水仕様(ただし雨天長時間走行の場合はレインウェアをご使用ください) 着脱保温ライナー付属 胸部プロテクター(一体型) : SK-830 ( ソフトタイプ / CE lv.2 ) 肩プロテクター : SK-811 ( ソフトタイプ / CE lv.2 ) 肘プロテクター : SK-810 ( ソフトタイプ / CE lv.2 ) 背中プロテクター : SK-829 ( ハードタイプ / CE lv.2 ) 脇腹プロテクター : SK-813 ( ソフトタイプ / CE lv.2 ) 肩スライダー 前腕・背中 : ベンチレーション パンツコネクションジッパー(Bタイプ/PK-922， PK-920， PK-914， PK-801等接続可能) 別売りネックプロテクター(SK-647)装着可能 別売り電熱ライニングベスト(EK-101)装着可能 MATERIALS [outshell]nylon， polyurethane(PU laminated) [lining]polyester [warm liner]polyester PROTECTOR shoulder・elbow・back・chest (neck : option)

SKF Bearing Lock Nut And Locking Device - KMT 5 If you need to secure a bearing to a shaft on your equipment， choose this lock nut from SKFWhen tightened to the recommended torque， this unit provides enough friction between the ends of its pins and the shaft thread to hold a bearing firmly in placeThis makes it a good choice for machinery that operates at high vibration levels or high rotational speedsIt also makes installation quicker and simpler as theres no separate locking device to worry aboutAs the component is reusable， its a long-lasting choice. Axial static load carrying capacity of 130 kN Mass of 0.14 kg Locking screw size of M6 Recommended tightening torque of 8 Nm Application Information Wind power generation Automotive manufacturing PrintingSKF ロックナット及びロック装置は、ベアリングを補完するために必要です。SKF では、アダプタスリーブ、回収スリーブ、ロックナットなど、幅広いベアリングアクセサリを用意しています。 What are the advantages of lock nuts with locking pins 高品質Lock nuts with locking pins are adjustable and can accommodate high axial loadsTheyre also simple to install and remove as neededWhat are some of the common uses of lock nuts Lock nuts are frequently used to secure gears， belt pulleys and other machine components.

RS PRO Oil Only SockThe RS PRO Oil Only Sock has a size of 7.5cm x 1.2m (W x L). It is designed for selective recovery of oils and oil-based fluids while repelling water including fuels， lubricants (mineral and vegetable)， and other hydrocarbon-based fluids. Spun bond or knitted outer fabric ensures excellent fluid uptake. It is ideal for outdoors with still water.Features and Benefits 40ltr absorbent capacity Oil only absorbents are generally white in colourCertifications ANSI/ESD S20.20: 2014 BS EN 61340-5-1: 2007

DescriptionThese are your run-of-the-mill 1/4 Watt， +/- 5% tolerance PTH resistors. Commonly used in breadboards and other prototyping applications， these 1M ohm resistors make excellent pull-ups， pull-downs and current limiters. These thick-lead vers

DescriptionThese are your run-of-the-mill 1/4 Watt， +/- 5% tolerance PTH resistors. Commonly used in breadboards and other prototyping applications， these 100 ohm resistors make excellent pull-ups， pull-downs and current limiters. These thick-lead v

DescriptionThe Raspberry Pi PoE+ HAT is designed to replace the existing Raspberry Pi PoE HAT in all new and existing designs. Like the original， the PoE+ HAT allows you to power your Raspberry Pi using Power over Ethernet networks. The PoE+ HAT meets all the requirements of the IEEE 802.3af(802.3at Type 1， PoE+)specifications. This ups the power the network can supply from 15.4 watts(PoE)to 25.5 Watts(PoE+)over CAT5 cable.No modification to the main Raspberry Pi board is needed for the PoE+ HAT to work but you will need to ensure that your Pi's software is up to date for all functionality to be available. The Raspberry Pi PoE+ HAT is fitted with a small fan that is controlled by the Raspberry Pi via I2C and will turn on and off automatically depending on the temperature of the main processor on your Pi.Note：There is no Raspberry Pi included with this product. Your desired Pi will need to be purchased separately.FeaturesInput voltage：37-57V DC， Class 2 deviceOutput power：5V DC/3.0ACooling：25mm×25mm brushless fan delivering 2.2CFM forprocessor coolingFully isolated switch-mode power supplyFan controlMechanically compatible with the existing Raspberry Pi PoE HAT

DescriptionThese are your run-of-the-mill 1/4 Watt， +/- 5% tolerance PTH resistors. Commonly used in breadboards and other prototyping applications， these 1K ohm resistors make excellent pull-ups， pull-downs and current limiters. These thick-lead versions of the resistors fit snugly into a breadboard with very little movement， so you should have few to no issues using them in your next project!These resistors come in bags of 20.

DescriptionThese are your run-of-the-mill 1/4 Watt， +/- 5% tolerance PTH resistors. Commonly used in breadboards and other prototyping applications， these 10K ohm resistors make excellent pull-ups， pull-downs and current limiters. These thick-lead versions of the resistors fit snugly into a breadboard with very little movement， so you should have few to no issues using them in your next project!These resistors come in bags of 20. They are the same resistors found in the SparkFun Inventor's Kit v4.0， upgraded from the resistors in previous versions of the kit.

DescriptionThis MI：pro Protector Case for the BBC micro：bit has been designed to work with both the original micro：bit V1 and the micro：bit V2. These cases feature a four-layer construction style with ability to mount a 2xAAA battery pack to the back of the case while still providing access to all buttons and ports on the micro：bit. Though these cases do protect the micro：bit astoundingly well， the biggest benefit of using the MI：pro is to not accidentally short out the pads on the back of the micro：bit.Construction is simple， requiring only a small flathead screwdriver(at most)， and involves layering each plate on top of one another around the micro：bit and screwing it into place. Luckily， the MI：pro Protector case enables easy access to the edge pins at the bottom of the micro：bit， allowing it to still be plugged into an edge connector found on many of our carrier boards. The only board that cannot be used in conjunction with the MI：pro case is the SparkFun gamer：bit due to its edge connector being located in the center of the board.Note：The MI：pro Protector case only includes the parts found in the Includes Tab. This case doesNOTinclude a micro：bit， power source or mounting screws. These items will need to be purchased separately.FeaturesDimensions：Length：65mm.Width：37mm.Depth(without screws)：12mm.Depth(with screws)：18.5mm.Provides excellent protection to the BBC micro：bit whilst allowing access to the bottom pins.Full access to the A and B buttons on the BBC micro：bit.Attach a battery cage to the rear of the case with the supplied sticky fixer.Full access to pins and connections including the micro USB connector.Clear case material shows the on-board LEDs in perfect clarity.The case is compatible with versions 1 and 2 of the micro：bit.When used in conjunction with a battery holder， micro：bit projects can be fully mobile.

DescriptionThe Mountable MI：pro is a simple and compact protective case for the micro：bit. This case has been specifically designed with portability and expansion in mind and is compatible with both the original micro：bit V1 and the micro：bit V2. These cases feature a three-layer construction style with ability to wall-mount the whole assembly onto any surface you want while still providing access to all buttons and ports on the micro：bit. Though these cases do feature wall-mountable tabs， the biggest benefit of using a case is to not accidentally short out the pads on the back of the micro：bit.Construction is simple， requiring only a small flathead screwdriver， and involves layering each plate on top of one another around the micro：bit and screwing it into place. Luckily， the MI：pro case enables easy access to the edge pins at the bottom of the micro：bit， allowing it to still be plugged into an edge connector found on many of our carrier boards. The only board that cannot be used in conjunction with the MI：pro case is the SparkFun gamer：bit due to its edge connector being located in the center of the board.Note：The MI：pro case only includes the parts found in the Includes Tab. This case does NOT include a micro：bit， power source or mounting screws. These items will need to be purchased separately.FeaturesDimensions：Length(minus the mounting brackets on the side)：65mm.Length(with the mounting brackets on the side)：91mm.Width：37mm.Depth(without screws)：9mm.Depth(with screws)：14mm.Provides excellent protection to the BBC micro：bit whilst allowing access to the bottom pins.Full access to the A and B buttons on the BBC micro：bit.The mounting points allow you to fix the micro：bit to a surface for sturdy and more permanent installations.Full access to pins and connections including the micro USB connector.Clear case material shows the on-board LEDs in perfect clarity.The case is compatible with versions 1 and 2 of the micro：bit.

DescriptionThe SparkFun Qwiic micro：bit Breakout is a board that connects to the BBC micro：bit and expands the capabilities of the development platform by providing access to more pins and allowing for connections to the I2C and SPI buses. This breakout board for the micro：bit's edge connector allows intermediate and advanced users to connect the micro：bit to breadboards and other Qwiic sensors， motors， LEDs and more.The micro：bit on its own has three digital/analog input/output rings available for you to use initially with alligator clips. With the micro：bit Breakout we have broken out all 21 GPIO， power and ground-to-pin outs in a 0.1" formation and with two individual Qwiic Connectors. With this breakout you will be able to unlock the full potential of your micro：bit!Note：No micro：bit or headers are included with this breakout； they will need to be purchased separately. If you would like a micro：bit breakout with headers already soldered on， be sure to check out this board's sibling.The SparkFun Qwiic Connect System is an ecosystem of I2C sensors， actuators， shields and cables that make prototyping faster and less prone to error. All Qwiic-enabled boards use a common 1mm pitch， 4-pin JST connector. This reduces the amount of required PCB space， and polarized connections mean you can't hook it up wrong.Get Started with the Qwiic micro：bit Breakout Guide

DescriptionThe SparkFun BME280 Atmospheric Sensor Breakout is the easy way to measure barometric pressure， humidity， and temperature readings all without taking up too much space. Basically， anything you need to know about atmospheric conditions you can find out from this tiny breakout. The BME280 Breakout has been design to be used in indoor/outdoor navigation， weather forecasting， home automation， and even personal health and wellness monitoring.The on-board BME280 sensor measures atmospheric pressure from 30kPa to 110kPa as well as relative humidity and temperature. The breakout provides a 3.3V SPI interface， a 5V tolerant I2C interface(with pull-up resistors to 3.3V)， takes measurements at less than 1mA and idles less than 5μA. The BME280 Breakout board has 10 pins， but no more than six are used at a single time. The left side of the board provide power， ground， and I2C pins. The remaining pins which provide SPI functionality and have another power and ground， are broken out on the other side.Note：The breakout does NOT have headers installed and will need to purchased and soldered on yourself. Check theRecommended Productssection below for the type of headers we use in the Hookup Guide!FeaturesOperation Voltage：3.3VI2C SPI Communications InterfaceTemp Range：-40C to 85CHumidity Range：0 - 100% RH， =-3% from 20-80%Pressure Range：30，000Pa to 110，000Pa， relative accuracy of 12Pa， absolute accuracy of 100PaAltitude Range：0 to 30，000 ft(9.2 km)， relative accuracy of 3.3 ft(1 m)at sea level， 6.6(2 m)at 30，000 ft.Incredibly Small

DescriptionThe PQ12 series of micro linear actuators are ideal for applications requiring precise positioning and compact size. Weighing in at just 22 grams， the PQ12 is incredibly light as well as compact. The affordably-priced PQ12 is the most powerful actuator of it's size. This is why it has become a popular choice for OEM manufacturers as well as Arduino and RC hobbyists. Some industries where the PQ12 are in use include：prosthetics， robotics， medical， simulation.The PQ12-R series of linear servos operate as a direct replacement for standard rotary servos. They use the same standard 3 wire connector， ground power and control. Regardless of how you drive your servos， be it with an RC receiver， an Arduino board， or a VEX micro-controller， the PQ12-R servo will function in place of a regular servo， but with the added benefit of providing linear motion. The PQ12-R is available in a 20mm stroke coupled with gear ratio options of 30：1， 63：1 and 100：1 cover a large variety of applications.The PQ12-100-6-R has：a 100：1 gear ratio for maximum lifting force； 6VDC operating voltage； and a servo(PWM)interface. This powerful little actuator can lift 50N(～5kg)!The datasheet doesn't mention a minimum operating voltage， but we've tested this actuator at 5VDC and it seems to work just fine. The maximum force and movement speed are reduced of course.FeaturesGearing Option：100：1Peak Power Point：40N @ 6mm/sPeak Efficiency Point：20N @ 8mm/sMax Speed(no load)：10mm/sMax Force(lifted)：50NMax Side Load：10NBack Drive Force：35NStroke：20 mmInput Voltage：6 VDCStall Current：550mA @ 6VMass：22gOperating Temperature -10℃ to +50℃Positional Repeatability：±0.1mmMechanical Backlash：0.25 mmAudible Noise：55dB @ 45cmIngress Protection：IP-54Maximum Duty Cycle：20%PWM(Servo)signal：Fully retracted：2.0ms @ 50HzFully extended：1.0ms @ 50Hz

DescriptionThe LilyMini ProtoSnap is a great way to get started learning about creating interactive e-textile circuits before you start sewing. Like other LilyPad ProtoSnap boards， the LilyMini ProtoSnap has all of its pieces wired together out of the box， enabling you to test the circuit's function before you sew. At the center of the board is a pre-programmed LilyMini microcontroller connected to a LilyPad Light Sensor， LilyPad Button and two pairs of LilyPad LEDs.The LilyMini ProtoSnap ships with pre-loaded code that uses all the LilyPad pieces connected to it. This sample code has three modes， which can be selected by pressing the LilyPad Button on the bottom-left side of the ProtoSnap. The built-in RGB LED on the LilyMini will change color to indicate which mode has been selected：White：All LEDs on.Magenta：LEDs fade in and out in a breathing pattern. When the light sensor is covered， LEDs fade faster.Cyan：LEDs off. When the light sensor is covered， LEDs will twinkle.The LilyMini board， at the center of the ProtoSnap， has a built-in battery holder for a CR2032 battery(included). On the opposite side of the LilyMini you will find the SAMD11 brain， which controls the ProtoSnap.Note：A portion of this sale is given back to Dr. Leah Buechley for continued development and education in e-textiles.Note：The LilyPad LilyMini ProtoSnap does NOT include sewing needles or conductive thread. These items will need to purchased separately.Warning：You cannot reprogram this product and any attempt at programming is at your own risk!Get Started with the LilyMini ProtoSnap Guide