「scl」の検索結果

RS PRO General Purpose Enclosure， IP66 Introducing the range of RS PRO die cast aluminium General Purpose Enclosures， providing a secure enclosure， ideal for protecting electrical parts and components. These lightweight yet durable enclosures are made from die cast aluminium， providing shock-absorbent and scratch-resistant properties， ensuring ultimate protection for delicate and expensive equipment housed inside them. Each high-quality enclosure is quick and easy to install and can be mounted on flat surfaces in a variety of environments. This cost-effective RS PRO enclosure hermetically sealed for security， ensuring an IP66 protection rating， ideal for a wide range of applications and environments. Features and Benefits: These lightweight yet durable RS PRO EMC shielded enclosures offer an ideal protective solution for expensive and delicate electrical parts and components Made from high-quality die-cast aluminium with shock-absorbent and scratch-resistant properties， the enclosures provide protection from dust， moisture and any other debris that could potentially damage expensive and delicate equipment The smooth finish allows for easy cleaning and keeping the surface dust and debris free Each enclosure is quick and easy to install， saving time and valuable resource for more important tasks This range of RS PRO enclosure features an IP66 and IK09 rating， providing optimum protection for internal components and is also ATEX approved They are available in a range of different sizes to suit different specifications and come in a modern light grey colour， ideal for environments where neutral colours are preferred Supplied with lid and base， polyurethane seal， captive +/- stainless steel screws and 4 copper plated earthing screws Applications: General purpose enclosures are units that are designed to accommodate a wide variety of items for secure and safe storage. They are often used for the protection of electronics equipment and often are compliant to IP， fire resistance and corrosion-resistant， dependant on what is being stored and where it is being stored. These enclosures are such versatile units， they can be used for practically any storage application， they can be wall-mounted if needed and they can be made from a wide variety of materials like aluminium， ABS， fibreglass and much more. General purpose enclosures are often used for: Cable/Wire Management IT/Servers Solar Power Batteries Oil and Gas Production Food and Beverage Industry Telecommunication Industry What is Ingress Protection. An IP rating classifies the degrees of protection provided against the intrusion of solid objects (including body parts like hands and fingers)， dust， accidental contact and water in electrical enclosures. The first number indicates the protection from solids and the second number is the protection from liquids. Can the enclosure be used outside. This enclosure has an IP66 rating meaning it is protected against dust and water ingress， making it suitable for use outside. Why RS PRO. RS PRO is our own brand range and brings you a wide range of high-quality， great value products offering you more choice. Trusted by engineers all over the world， every part of every RS PRO product has been rigorously tested against demanding industry standards they’re only given the RS PRO seal of approval if we’re confident of their exceptional quality， which means you can be confident too.

RS PRO General Purpose Enclosure， IP66 Introducing the range of RS PRO die cast aluminium General Purpose Enclosures， providing a secure enclosure， ideal for protecting electrical parts and components. These lightweight yet durable enclosures are made from die cast aluminium， providing shock-absorbent and scratch-resistant properties， ensuring ultimate protection for delicate and expensive equipment housed inside them. Each high-quality enclosure is quick and easy to install and can be mounted on flat surfaces in a variety of environments. This cost-effective RS PRO enclosure hermetically sealed for security， ensuring an IP66 protection rating， ideal for a wide range of applications and environments. Features and Benefits: These lightweight yet durable RS PRO EMC shielded enclosures offer an ideal protective solution for expensive and delicate electrical parts and components Made from high-quality die-cast aluminium with shock-absorbent and scratch-resistant properties， the enclosures provide protection from dust， moisture and any other debris that could potentially damage expensive and delicate equipment The smooth finish allows for easy cleaning and keeping the surface dust and debris free Each enclosure is quick and easy to install， saving time and valuable resource for more important tasks This range of RS PRO enclosure features an IP66 and IK09 rating， providing optimum protection for internal components and is also ATEX approved They are available in a range of different sizes to suit different specifications and come in a modern light grey colour， ideal for environments where neutral colours are preferred Supplied with lid and base， polyurethane seal， captive +/- stainless steel screws and 4 copper plated earthing screws Applications: General purpose enclosures are units that are designed to accommodate a wide variety of items for secure and safe storage. They are often used for the protection of electronics equipment and often are compliant to IP， fire resistance and corrosion-resistant， dependant on what is being stored and where it is being stored. These enclosures are such versatile units， they can be used for practically any storage application， they can be wall-mounted if needed and they can be made from a wide variety of materials like aluminium， ABS， fibreglass and much more. General purpose enclosures are often used for: Cable/Wire Management IT/Servers Solar Power Batteries Oil and Gas Production Food and Beverage Industry Telecommunication Industry What is Ingress Protection. An IP rating classifies the degrees of protection provided against the intrusion of solid objects (including body parts like hands and fingers)， dust， accidental contact and water in electrical enclosures. The first number indicates the protection from solids and the second number is the protection from liquids. Can the enclosure be used outside. This enclosure has an IP66 rating meaning it is protected against dust and water ingress， making it suitable for use outside. Why RS PRO. RS PRO is our own brand range and brings you a wide range of high-quality， great value products offering you more choice. Trusted by engineers all over the world， every part of every RS PRO product has been rigorously tested against demanding industry standards they’re only given the RS PRO seal of approval if we’re confident of their exceptional quality， which means you can be confident too.

RS PRO General Purpose Enclosure， IP66 Introducing the range of RS PRO die cast aluminium General Purpose Enclosures， providing a secure enclosure， ideal for protecting electrical parts and components. These lightweight yet durable enclosures are made from die cast aluminium， providing shock-absorbent and scratch-resistant properties， ensuring ultimate protection for delicate and expensive equipment housed inside them. Each high-quality enclosure is quick and easy to install and can be mounted on flat surfaces in a variety of environments. This cost-effective RS PRO enclosure hermetically sealed for security， ensuring an IP66 protection rating， ideal for a wide range of applications and environments. Features and Benefits: These lightweight yet durable RS PRO EMC shielded enclosures offer an ideal protective solution for expensive and delicate electrical parts and components Made from high-quality die-cast aluminium with shock-absorbent and scratch-resistant properties， the enclosures provide protection from dust， moisture and any other debris that could potentially damage expensive and delicate equipment The smooth finish allows for easy cleaning and keeping the surface dust and debris free Each enclosure is quick and easy to install， saving time and valuable resource for more important tasks This range of RS PRO enclosure features an IP66 and IK09 rating， providing optimum protection for internal components and is also ATEX approved They are available in a range of different sizes to suit different specifications and come in a modern light grey colour， ideal for environments where neutral colours are preferred Supplied with lid and base， polyurethane seal， captive +/- stainless steel screws and 4 copper plated earthing screws Applications: General purpose enclosures are units that are designed to accommodate a wide variety of items for secure and safe storage. They are often used for the protection of electronics equipment and often are compliant to IP， fire resistance and corrosion-resistant， dependant on what is being stored and where it is being stored. These enclosures are such versatile units， they can be used for practically any storage application， they can be wall-mounted if needed and they can be made from a wide variety of materials like aluminium， ABS， fibreglass and much more. General purpose enclosures are often used for: Cable/Wire Management IT/Servers Solar Power Batteries Oil and Gas Production Food and Beverage Industry Telecommunication Industry What is Ingress Protection. An IP rating classifies the degrees of protection provided against the intrusion of solid objects (including body parts like hands and fingers)， dust， accidental contact and water in electrical enclosures. The first number indicates the protection from solids and the second number is the protection from liquids. Can the enclosure be used outside. This enclosure has an IP66 rating meaning it is protected against dust and water ingress， making it suitable for use outside. Why RS PRO. RS PRO is our own brand range and brings you a wide range of high-quality， great value products offering you more choice. Trusted by engineers all over the world， every part of every RS PRO product has been rigorously tested against demanding industry standards they’re only given the RS PRO seal of approval if we’re confident of their exceptional quality， which means you can be confident too.

RS PRO General Purpose Enclosure， IP66 Introducing the range of RS PRO die cast aluminium General Purpose Enclosures， providing a secure enclosure， ideal for protecting electrical parts and components. These lightweight yet durable enclosures are made from die cast aluminium， providing shock-absorbent and scratch-resistant properties， ensuring ultimate protection for delicate and expensive equipment housed inside them. Each high-quality enclosure is quick and easy to install and can be mounted on flat surfaces in a variety of environments. This cost-effective RS PRO enclosure hermetically sealed for security， ensuring an IP66 protection rating， ideal for a wide range of applications and environments. Features and Benefits: These lightweight yet durable RS PRO EMC shielded enclosures offer an ideal protective solution for expensive and delicate electrical parts and components Made from high-quality die-cast aluminium with shock-absorbent and scratch-resistant properties， the enclosures provide protection from dust， moisture and any other debris that could potentially damage expensive and delicate equipment The smooth finish allows for easy cleaning and keeping the surface dust and debris free Each enclosure is quick and easy to install， saving time and valuable resource for more important tasks This range of RS PRO enclosure features an IP66 and IK09 rating， providing optimum protection for internal components and is also ATEX approved They are available in a range of different sizes to suit different specifications and come in a modern light grey colour， ideal for environments where neutral colours are preferred Supplied with lid and base， polyurethane seal， captive +/- stainless steel screws and 4 copper plated earthing screws Applications: General purpose enclosures are units that are designed to accommodate a wide variety of items for secure and safe storage. They are often used for the protection of electronics equipment and often are compliant to IP， fire resistance and corrosion-resistant， dependant on what is being stored and where it is being stored. These enclosures are such versatile units， they can be used for practically any storage application， they can be wall-mounted if needed and they can be made from a wide variety of materials like aluminium， ABS， fibreglass and much more. General purpose enclosures are often used for: Cable/Wire Management IT/Servers Solar Power Batteries Oil and Gas Production Food and Beverage Industry Telecommunication Industry What is Ingress Protection. An IP rating classifies the degrees of protection provided against the intrusion of solid objects (including body parts like hands and fingers)， dust， accidental contact and water in electrical enclosures. The first number indicates the protection from solids and the second number is the protection from liquids. Can the enclosure be used outside. This enclosure has an IP66 rating meaning it is protected against dust and water ingress， making it suitable for use outside. Why RS PRO. RS PRO is our own brand range and brings you a wide range of high-quality， great value products offering you more choice. Trusted by engineers all over the world， every part of every RS PRO product has been rigorously tested against demanding industry standards they’re only given the RS PRO seal of approval if we’re confident of their exceptional quality， which means you can be confident too.

RS PRO General Purpose Enclosure， IP66 Introducing the range of RS PRO die cast aluminium General Purpose Enclosures， providing a secure enclosure， ideal for protecting electrical parts and components. These lightweight yet durable enclosures are made from die cast aluminium， providing shock-absorbent and scratch-resistant properties， ensuring ultimate protection for delicate and expensive equipment housed inside them. Each high-quality enclosure is quick and easy to install and can be mounted on flat surfaces in a variety of environments. This cost-effective RS PRO enclosure hermetically sealed for security， ensuring an IP66 protection rating， ideal for a wide range of applications and environments. Features and Benefits: These lightweight yet durable RS PRO EMC shielded enclosures offer an ideal protective solution for expensive and delicate electrical parts and components Made from high-quality die-cast aluminium with shock-absorbent and scratch-resistant properties， the enclosures provide protection from dust， moisture and any other debris that could potentially damage expensive and delicate equipment The smooth finish allows for easy cleaning and keeping the surface dust and debris free Each enclosure is quick and easy to install， saving time and valuable resource for more important tasks This range of RS PRO enclosure features an IP66 and IK09 rating， providing optimum protection for internal components and is also ATEX approved They are available in a range of different sizes to suit different specifications and come in a modern light grey colour， ideal for environments where neutral colours are preferred Supplied with lid and base， polyurethane seal， captive +/- stainless steel screws and 4 copper plated earthing screws Applications: General purpose enclosures are units that are designed to accommodate a wide variety of items for secure and safe storage. They are often used for the protection of electronics equipment and often are compliant to IP， fire resistance and corrosion-resistant， dependant on what is being stored and where it is being stored. These enclosures are such versatile units， they can be used for practically any storage application， they can be wall-mounted if needed and they can be made from a wide variety of materials like aluminium， ABS， fibreglass and much more. General purpose enclosures are often used for: Cable/Wire Management IT/Servers Solar Power Batteries Oil and Gas Production Food and Beverage Industry Telecommunication Industry What is Ingress Protection. An IP rating classifies the degrees of protection provided against the intrusion of solid objects (including body parts like hands and fingers)， dust， accidental contact and water in electrical enclosures. The first number indicates the protection from solids and the second number is the protection from liquids. Can the enclosure be used outside. This enclosure has an IP66 rating meaning it is protected against dust and water ingress， making it suitable for use outside. Why RS PRO. RS PRO is our own brand range and brings you a wide range of high-quality， great value products offering you more choice. Trusted by engineers all over the world， every part of every RS PRO product has been rigorously tested against demanding industry standards they’re only given the RS PRO seal of approval if we’re confident of their exceptional quality， which means you can be confident too.

RS PRO Rigging Screw， Jaw to Jaw， M8If you need to fasten rigging safely， use this RS PRO rigging screw. The part is manufactured from durable stainless steel and features jaw fittings on both ends， which provides secure connection point for tensioned ropes. The screw has an open length measurement of 240 mm， close length of 165 mm and an eye diameter and thread size of mm. locking pin firmly holds each jaw in place and the screws rotating body allows you to increase or decrease the length as required. The part has total weight of 160 g. This type of rigging screw is useful for holding ropes at specific tension. Youll commonly see them used on suspension bridges， as part of boats rigging system and situations where two loads need tightening.Features and Benefits Jaw-to-jaw stainless-steel rigging screw Electro-polished finish End jaw fitting End jaw fitting Closed length of 165 mm Open length of 240 mm Eye diameter of mm Thread size of M8RS PRORS PRO is our own brand range and brings you wide range of high-quality， great value products offering you more choice. Trusted by engineers all over the world， every part of every RS PRO product has been rigorously tested against demanding industry standards they’re only given the RS PRO Seal of Approval if we’re confident of their exceptional quality， which means you can be confident too.

RS PRO General Purpose Enclosure， IP66 Introducing the range of RS PRO die cast aluminium General Purpose Enclosures， providing a secure enclosure， ideal for protecting electrical parts and components. These lightweight yet durable enclosures are made from die cast aluminium， providing shock-absorbent and scratch-resistant properties， ensuring ultimate protection for delicate and expensive equipment housed inside them. Each high-quality enclosure is quick and easy to install and can be mounted on flat surfaces in a variety of environments. This cost-effective RS PRO enclosure hermetically sealed for security， ensuring an IP66 protection rating， ideal for a wide range of applications and environments. Features and Benefits: These lightweight yet durable RS PRO EMC shielded enclosures offer an ideal protective solution for expensive and delicate electrical parts and components Made from high-quality die-cast aluminium with shock-absorbent and scratch-resistant properties， the enclosures provide protection from dust， moisture and any other debris that could potentially damage expensive and delicate equipment The smooth finish allows for easy cleaning and keeping the surface dust and debris free Each enclosure is quick and easy to install， saving time and valuable resource for more important tasks This range of RS PRO enclosure features an IP66 and IK09 rating， providing optimum protection for internal components and is also ATEX approved They are available in a range of different sizes to suit different specifications and come in a modern light grey colour， ideal for environments where neutral colours are preferred Supplied with lid and base， polyurethane seal， captive +/- stainless steel screws and 4 copper plated earthing screws Applications: General purpose enclosures are units that are designed to accommodate a wide variety of items for secure and safe storage. They are often used for the protection of electronics equipment and often are compliant to IP， fire resistance and corrosion-resistant， dependant on what is being stored and where it is being stored. These enclosures are such versatile units， they can be used for practically any storage application， they can be wall-mounted if needed and they can be made from a wide variety of materials like aluminium， ABS， fibreglass and much more. General purpose enclosures are often used for: Cable/Wire Management IT/Servers Solar Power Batteries Oil and Gas Production Food and Beverage Industry Telecommunication Industry What is Ingress Protection. An IP rating classifies the degrees of protection provided against the intrusion of solid objects (including body parts like hands and fingers)， dust， accidental contact and water in electrical enclosures. The first number indicates the protection from solids and the second number is the protection from liquids. Can the enclosure be used outside. This enclosure has an IP66 rating meaning it is protected against dust and water ingress， making it suitable for use outside. Why RS PRO. RS PRO is our own brand range and brings you a wide range of high-quality， great value products offering you more choice. Trusted by engineers all over the world， every part of every RS PRO product has been rigorously tested against demanding industry standards they’re only given the RS PRO seal of approval if we’re confident of their exceptional quality， which means you can be confident too.

RS PRO General Purpose Enclosure， IP66 Introducing the range of RS PRO die cast aluminium General Purpose Enclosures， providing a secure enclosure， ideal for protecting electrical parts and components. These lightweight yet durable enclosures are made from die cast aluminium， providing shock-absorbent and scratch-resistant properties， ensuring ultimate protection for delicate and expensive equipment housed inside them. Each high-quality enclosure is quick and easy to install and can be mounted on flat surfaces in a variety of environments. This cost-effective RS PRO enclosure hermetically sealed for security， ensuring an IP66 protection rating， ideal for a wide range of applications and environments. Features and Benefits: These lightweight yet durable RS PRO EMC shielded enclosures offer an ideal protective solution for expensive and delicate electrical parts and components Made from high-quality die-cast aluminium with shock-absorbent and scratch-resistant properties， the enclosures provide protection from dust， moisture and any other debris that could potentially damage expensive and delicate equipment The smooth finish allows for easy cleaning and keeping the surface dust and debris free Each enclosure is quick and easy to install， saving time and valuable resource for more important tasks This range of RS PRO enclosure features an IP66 and IK09 rating， providing optimum protection for internal components and is also ATEX approved They are available in a range of different sizes to suit different specifications and come in a modern light grey colour， ideal for environments where neutral colours are preferred Supplied with lid and base， polyurethane seal， captive +/- stainless steel screws and 4 copper plated earthing screws Applications: General purpose enclosures are units that are designed to accommodate a wide variety of items for secure and safe storage. They are often used for the protection of electronics equipment and often are compliant to IP， fire resistance and corrosion-resistant， dependant on what is being stored and where it is being stored. These enclosures are such versatile units， they can be used for practically any storage application， they can be wall-mounted if needed and they can be made from a wide variety of materials like aluminium， ABS， fibreglass and much more. General purpose enclosures are often used for: Cable/Wire Management IT/Servers Solar Power Batteries Oil and Gas Production Food and Beverage Industry Telecommunication Industry What is Ingress Protection. An IP rating classifies the degrees of protection provided against the intrusion of solid objects (including body parts like hands and fingers)， dust， accidental contact and water in electrical enclosures. The first number indicates the protection from solids and the second number is the protection from liquids. Can the enclosure be used outside. This enclosure has an IP66 rating meaning it is protected against dust and water ingress， making it suitable for use outside. Why RS PRO. RS PRO is our own brand range and brings you a wide range of high-quality， great value products offering you more choice. Trusted by engineers all over the world， every part of every RS PRO product has been rigorously tested against demanding industry standards they’re only given the RS PRO seal of approval if we’re confident of their exceptional quality， which means you can be confident too.

RS PRO General Purpose Enclosure， IP66 Introducing the range of RS PRO die cast aluminium General Purpose Enclosures， providing a secure enclosure， ideal for protecting electrical parts and components. These lightweight yet durable enclosures are made from die cast aluminium， providing shock-absorbent and scratch-resistant properties， ensuring ultimate protection for delicate and expensive equipment housed inside them. Each high-quality enclosure is quick and easy to install and can be mounted on flat surfaces in a variety of environments. This cost-effective RS PRO enclosure hermetically sealed for security， ensuring an IP66 protection rating， ideal for a wide range of applications and environments. Features and Benefits: These lightweight yet durable RS PRO EMC shielded enclosures offer an ideal protective solution for expensive and delicate electrical parts and components Made from high-quality die-cast aluminium with shock-absorbent and scratch-resistant properties， the enclosures provide protection from dust， moisture and any other debris that could potentially damage expensive and delicate equipment The smooth finish allows for easy cleaning and keeping the surface dust and debris free Each enclosure is quick and easy to install， saving time and valuable resource for more important tasks This range of RS PRO enclosure features an IP66 and IK09 rating， providing optimum protection for internal components and is also ATEX approved They are available in a range of different sizes to suit different specifications and come in a modern light grey colour， ideal for environments where neutral colours are preferred Supplied with lid and base， polyurethane seal， captive +/- stainless steel screws and 4 copper plated earthing screws Applications: General purpose enclosures are units that are designed to accommodate a wide variety of items for secure and safe storage. They are often used for the protection of electronics equipment and often are compliant to IP， fire resistance and corrosion-resistant， dependant on what is being stored and where it is being stored. These enclosures are such versatile units， they can be used for practically any storage application， they can be wall-mounted if needed and they can be made from a wide variety of materials like aluminium， ABS， fibreglass and much more. General purpose enclosures are often used for: Cable/Wire Management IT/Servers Solar Power Batteries Oil and Gas Production Food and Beverage Industry Telecommunication Industry What is Ingress Protection. An IP rating classifies the degrees of protection provided against the intrusion of solid objects (including body parts like hands and fingers)， dust， accidental contact and water in electrical enclosures. The first number indicates the protection from solids and the second number is the protection from liquids. Can the enclosure be used outside. This enclosure has an IP66 rating meaning it is protected against dust and water ingress， making it suitable for use outside. Why RS PRO. RS PRO is our own brand range and brings you a wide range of high-quality， great value products offering you more choice. Trusted by engineers all over the world， every part of every RS PRO product has been rigorously tested against demanding industry standards they’re only given the RS PRO seal of approval if we’re confident of their exceptional quality， which means you can be confident too.

RS PRO General Purpose Enclosure， IP66 Introducing the range of RS PRO die cast aluminium General Purpose Enclosures， providing a secure enclosure， ideal for protecting electrical parts and components. These lightweight yet durable enclosures are made from die cast aluminium， providing shock-absorbent and scratch-resistant properties， ensuring ultimate protection for delicate and expensive equipment housed inside them. Each high-quality enclosure is quick and easy to install and can be mounted on flat surfaces in a variety of environments. This cost-effective RS PRO enclosure hermetically sealed for security， ensuring an IP66 protection rating， ideal for a wide range of applications and environments. Features and Benefits: These lightweight yet durable RS PRO EMC shielded enclosures offer an ideal protective solution for expensive and delicate electrical parts and components Made from high-quality die-cast aluminium with shock-absorbent and scratch-resistant properties， the enclosures provide protection from dust， moisture and any other debris that could potentially damage expensive and delicate equipment The smooth finish allows for easy cleaning and keeping the surface dust and debris free Each enclosure is quick and easy to install， saving time and valuable resource for more important tasks This range of RS PRO enclosure features an IP66 and IK09 rating， providing optimum protection for internal components and is also ATEX approved They are available in a range of different sizes to suit different specifications and come in a modern light grey colour， ideal for environments where neutral colours are preferred Supplied with lid and base， polyurethane seal， captive +/- stainless steel screws and 4 copper plated earthing screws Applications: General purpose enclosures are units that are designed to accommodate a wide variety of items for secure and safe storage. They are often used for the protection of electronics equipment and often are compliant to IP， fire resistance and corrosion-resistant， dependant on what is being stored and where it is being stored. These enclosures are such versatile units， they can be used for practically any storage application， they can be wall-mounted if needed and they can be made from a wide variety of materials like aluminium， ABS， fibreglass and much more. General purpose enclosures are often used for: Cable/Wire Management IT/Servers Solar Power Batteries Oil and Gas Production Food and Beverage Industry Telecommunication Industry What is Ingress Protection. An IP rating classifies the degrees of protection provided against the intrusion of solid objects (including body parts like hands and fingers)， dust， accidental contact and water in electrical enclosures. The first number indicates the protection from solids and the second number is the protection from liquids. Can the enclosure be used outside. This enclosure has an IP66 rating meaning it is protected against dust and water ingress， making it suitable for use outside. Why RS PRO. RS PRO is our own brand range and brings you a wide range of high-quality， great value products offering you more choice. Trusted by engineers all over the world， every part of every RS PRO product has been rigorously tested against demanding industry standards they’re only given the RS PRO seal of approval if we’re confident of their exceptional quality， which means you can be confident too.

Account should be taken of the protection features and safety ratings of the test meter itself when combined with high specification test leads. Fused Test Lead with Crocodile Clip. Suitable for use with the IDM 17 DMM， Supplied with fully insulated screw-in croc clip. Thin fine insulated prods set ； 2627770 2627770 for use with fused test prods and multimeter test lead sets are also available. Shuttered lantern probe set ； 2627786 2627786 for use with fused test prods and multimeter test lead sets are also available

RS Pro KDSclick ケーブルエントリRS Pro KDSclick 黒色ケーブルエントリセットの寸法は、 122 mm x 70 mm x 19.6 mm ( L x W x H )です。直径 5.5 mm の 4 つのねじ穴があります。セットは、 1 組の KDs-SR 8/16 、 1 組の KDS inlay1 、および 2 組の KDS inlay4 で構成されています。特長と利点 ハロゲンフリー ポリアミド 6.6 の材質 ポリウレタンベースのシール材 シーリングおよび成形されたフレキシブルフォームタイプシール シリコンフリー 使用温度範囲： -40 ° C ～ 120 ° C用途 ケーブルエントリ認定 IP66等級 CUL C22.2 No.14-95 認定 UL508 認定 UL 94 v-0 認定