学童・教育用品 ：「fix it」の検索結果

BASSBALLS は、デュアルフィルター構成による独特の”ボール状”フィルタースイープを生み出すエンベロープフィルター。ベースのアタックに反応して滑らかに開閉するフィルターと、スイッチ式ディストーションを組み合わせた個性的なフィルターエフェクト。・デュアルフィルターによる独特のフォルマント的スイープ。・入力の強弱に応じてフィルターが開閉するエンベロープ動作。・DISTORTION スイッチでフィルターに歪みを加え、より攻撃的なサウンドを生成。・ベースの低域を保ちながら、存在感のあるフィルター効果を付加。・ファンク、エレクトロ、ロックなど幅広いジャンルに対応。・ギターにも使用可能で、個性的なワウ/フォルマント効果を演出。・コンパクト筐体でペダルボードに組み込みやすい設計。・堅牢なメタル筐体でライブユースにも最適。・9V DC(センターマイナス)で駆動。・品名：BASSBALLS。・ブランド：electro-harmonix。・カテゴリ：Envelope Filter / Dual Filter。・コントロール：Sensitivity、Distortion Switch。・機能：デュアルフィルター、エンベロープフィルター、ディストーションブースト。・電源：9V DC(センターマイナス)。・筐体：メタル。・JANコード：0683274050034

Cock Fight Talking Wah は、コックドワウとトーキングモジュレーションを組み合わせた多機能フィルターペダル。固定ワウ的な強烈な中域フォーカスから、人の声のようなフォルマント効果まで、表現力豊かなフィルターサウンドを生成する個性派モデル。・COCKED WAH(固定ワウ)と TALKING(フォルマント)モードを搭載。・DRIVE セクションでファズを追加し、より攻撃的なフィルターサウンドを生成。・PRE/POST スイッチでファズの位置を選択(フィルター前/後)。・FREQ ノブでワウの中心周波数を直感的に調整。・TALK ノブでフォルマントの強さをコントロール。・BLEND ノブで原音とエフェクトのバランスを調整。・エクスプレッションペダル入力を搭載し、ワウをリアルタイム操作可能。・ギター、ベース、シンセなど幅広い楽器に対応。・個性的なフィルター効果でファンク、ロック、エレクトロに最適。・堅牢なメタル筐体による高い耐久性。・9V DC(センターマイナス)で駆動。・品名：Cock Fight Talking Wah。・ブランド：electro-harmonix。・カテゴリ：Filter / Wah / Formant。・コントロール：Drive、Freq、Talk、Blend、Pre/Post Switch、Mode Switch、EXP Input。・機能：コックドワウ、トーキングフィルター、ファズ(Pre/Post 切替)、EXP 対応。・電源：9V DC(センターマイナス)。・筐体：メタル。・JANコード：0683274011691

MICRO SYNTHESIZER は、ギター/ベースをアナログシンセのように変換するために設計された多機能フィルター/エンベロープ/ウェーブシェイピングペダル。スクエア波生成、サブオクターブ、アタックディレイ、レゾナントフィルターを組み合わせ、クラシックシンセの質感を自在に作り込める EHX の代表的シンセサイザーペダル。・ギター/ベースをアナログシンセ風サウンドへ変換する多機能シンセペダル。・SUB OCTAVE、GUITAR、OCTAVE、SQUARE WAVE の4系統を独立調整。・ATTACK DELAY によりアタックを柔らかくし、シンセパッド風の立ち上がりを再現。・RESONANT FILTER によるクラシックシンセ的なフィルタースイープを実現。・スライダー操作で直感的かつ細かな音作りが可能。・ギター、ベースどちらにも対応。・アナログ特有の太さと存在感を持つシンセトーンを生成。・堅牢なメタル筐体による高い耐久性。・9V DC(センターマイナス)で駆動。・品名：MICRO SYNTHESIZER。・ブランド：electro-harmonix。・カテゴリ：Analog Synthesizer / Filter Pedal。・コントロール：Sub Octave、Guitar、Octave、Square Wave、Attack Delay、Resonant Filter(Start/Stop/Rate)。・対応楽器：ギター/ベース。・電源：9V DC(センターマイナス)。・筐体：メタル。・JANコード：0683274010793

BASS MICROSYNTHESIZER は、ベースをアナログシンセのような太く存在感のあるトーンへ変換する多機能シンセサイザーペダル。サブオクターブ、スクエア波、フィルター、アタックディレイを組み合わせ、クラシックシンセの質感からモダンなシンセベースまで幅広く作り込める EHX の定番ベースシンセユニット。・ベース専用に最適化されたアナログシンセサウンドを生成。・SUB OCTAVE、GUITAR、OCTAVE、SQUARE WAVE の4系統を独立調整。・ATTACK DELAY によりアタックを柔らかくし、シンセパッド風の立ち上がりを再現。・RESONANT FILTER によるクラシックシンセ的なフィルタースイープを実現。・スライダー操作で細かく直感的な音作りが可能。・アナログ特有の太さと存在感を持つシンセベーストーンを生成。・ライブ、レコーディング、エレクトロ系アレンジなど幅広い用途に対応。・堅牢なメタル筐体による高い耐久性。・9V DC(センターマイナス)で駆動。・品名：BASS MICROSYNTHESIZER。・ブランド：electro-harmonix。・カテゴリ：Analog Bass Synthesizer / Filter Pedal。・コントロール：Sub Octave、Guitar、Octave、Square Wave、Attack Delay、Resonant Filter(Start/Stop/Rate)。・対応楽器：ベース。・電源：9V DC(センターマイナス)。・筐体：メタル。・JANコード：0683274010809

PICO DEEP FREEZE は、名機 Freeze/SuperEgo 系の”サウンド・フリーズ/無限サステイン”機能を超小型筐体に凝縮した最新モデル。単音・和音の保持、パッド化、ドローン生成など、アンビエント表現をボード最小クラスで実現する高品位フリーズペダル。・Freeze/SuperEgo 系の フリーズ/サステイン技術 を Pico サイズに最適化。・LATCH/MOMENT/AUTO の 3 モードでフリーズ動作を切替。・BLEND により原音とフリーズ音のバランスを自在に調整。・GLISS(グリッサンド)でフリーズ音の滑らかな変化を付加。・ATTACK/DECAY によりパッド的な立ち上がりや消え際を調整。・ギター/シンセ/ボイスなど幅広い入力に対応。・超小型 Pico サイズ筐体 によりボードの省スペース化を実現。・トゥルーバイパス仕様。・9V DC(センターマイナス)で駆動。・品名：PICO DEEP FREEZE。・ブランド：electro-harmonix。・カテゴリ：Freeze / Infinite Sustain / Ambient。・モード：Latch、Moment、Auto。・コントロール：Blend、Gliss、Attack、Decay、Mode。・特徴：無限サステイン、パッド化、グリッサンド、超小型筐体。・電源：9V DC(センターマイナス)。・筐体：Pico サイズメタル筐体。・JANコード：0683274012490

Grove - Wrapper is a kind of wrapper to fix and protect Grove modules. It will save you a lot of work on aligning your modules、and it will easy for you to show your project. For example、it will simpler to take pictures for showing your product on the I

Grove - Wrapper is a kind of wrapper to fix and protect Grove modules. It will save you a lot of work on aligning your modules、and it will easy for you to show your project. For example、it will simpler to take pictures for showing your product on the Internet、and it will give a clear and clean scene if you use Grove - Wrapper to demo your project. What is more、it is expandable for Lego、mechanical parts、and so on、this will introduce flavor into your work and make your project adapt to various circumstances. The mechanical design of Grove - Wrapper also make it easy to assemble and disassemble modules.。Notethat around 85% of all Grove modules are supported by Grove - Wrapper.。Features。Flex fastener to install and replace Grove modules conveniently.。Always keep your project safe.。Half-open space、no disruption for using Grove modules.。Compatible with Lego and Makeblock modules that will make your project adapting and interesting.。Support being fastened with screws(M2、M4).。Mutual-connect-able like Lego modules does.。Colorful wrappers.。Specification。Dimension(big one)：50×25×13 mm。Plane dimension(small one)：25 ×25×13 mm。Material：ABS

。Grove - Wrapper is a kind of wrapper to fix and protect Grove modules. It will save you a lot of work on aligning your modules、and it will easy for you to show your project. For example、it will simpler to take pictures for showing your product on the Internet、and it will give a clear and clean scene if you use Grove - Wrapper to demo your project. What is more、it is expandable for Lego、mechanical parts、and so on、this will introduce flavor into your work and make your project adapt to various circumstances. The mechanical design of Grove - Wrapper also make it easy to assemble and disassemble modules.。Notethat around 85% of all Grove modules are supported by Grove - Wrapper.。Features。Flex fastener to install and replace Grove modules conveniently.。Always keep your project safe.。Half-open space、no disruption for using Grove modules.。Compatible with Lego and Makeblock modules that will make your project adapting and interesting.。Support being fastened with screws(M2、M4).。Mutual-connect-able like Lego modules does.。Colorful wrappers.。Specification。Dimension(big one)：50×25×13 mm。Plane dimension(small one)：25 ×25×13 mm。Material：ABS

Grove - Wrapper is a kind of wrapper to fix and protect Grove modules. It will save you a lot of work on aligning your modules、and it will easy for you to show your project. For example、it will simpler to take pictures for showing your product on the Internet、and it will give a clear and clean scene if you use Grove - Wrapper to demo your project. What is more、it is expandable for Lego、mechanical parts、and so on、this will introduce flavor into your work and make your project adapt to various circumstances. The mechanical design of Grove - Wrapper also make it easy to assemble and disassemble modules.。Notethat around 85% of all Grove modules are supported by Grove - Wrapper.。Features。Flex fastener to install and replace Grove modules conveniently.。Always keep your project safe.。Half-open space、no disruption for using Grove modules.。Compatible with Lego and Makeblock modules that will make your project adapting and interesting.。Support being fastened with screws(M2、M4).。Mutual-connect-able like Lego modules does.。Colorful wrappers.。Specification。Dimension(big one)：50×25×13 mm。Plane dimension(small one)：25 ×25×13 mm。Material：ABS

。Grove - Wrapper is a kind of wrapper to fix and protect Grove modules. It will save you a lot of work on aligning your modules、and it will easy for you to show your project. For example、it will simpler to take pictures for showing your product on the Internet、and it will give a clear and clean scene if you use Grove - Wrapper to demo your project. What is more、it is expandable for Lego、mechanical parts、and so on、this will introduce flavor into your work and make your project adapt to various circumstances. The mechanical design of Grove - Wrapper also make it easy to assemble and disassemble modules.。Notethat around 85% of all Grove modules are supported by Grove - Wrapper.。Features。Flex fastener to install and replace Grove modules conveniently.。Always keep your project safe.。Half-open space、no disruption for using Grove modules.。Compatible with Lego and Makeblock modules that will make your project adapting and interesting.。Support being fastened with screws(M2、M4).。Mutual-connect-able like Lego modules does.。Colorful wrappers.。Specification。Dimension(big one)：50×25×13 mm。Plane dimension(small one)：25 ×25×13 mm。Material：ABS

Description。Having a broken phone or electronics device stinks， whether it's a screen going out， a cable becoming unplugged， or even a more severe issue that will cost you more money that your device is worth. The majority of us have had it happen. Fo

Description。The SparkFun ZOE-M8Q GPS Breakout is a high accuracy， miniaturized， GPS board that is perfect for applications that don't possess a lot of space. The on-board ZOE-M8Q is a 72-channel GNSS receiver， meaning it can receive signals from the GPS， GLONASS， BeiDou， and Galileo constellations. This increases precision and decreases lock time and thanks to the onboard rechargable battery you'll have backup power enabling the GPS to get a hot lock within seconds! Additionally， this u-blox receiver supports I2C(u-blox calls this Display Data Channel)which made it perfect for the Qwiic compatibility so we don't have to use up our precious UART ports. Utilizing our handy Qwiic system， no soldering is required to connect it to the rest of your system. However， we still have broken out 0.1"-spaced pins in case you prefer to use a breadboard.。U-blox based GPS products are configurable using the popular， but dense， windows program called u-center. Plenty of different functions can be configured on the ZOE-M8Q：baud rates， update rates， geofencing， spoofing detection， external interrupts， SBAS/D-GPS， etc. All of this can be done within the SparkFun Arduino Library. We've also made sure to configure the UART pin grouping on the breakout to an industry standard to insure that it easily connects to a Serial Basic.。The SparkFun ZOE-M8Q GPS Breakout is also equipped with an on-board rechargeable battery that provides power to the RTC on the ZOE-M8Q. This reduces the time-to-first fix from a cold start(～30s)to a hot start(～1s). The battery will maintain RTC and GNSS orbit data without being connected to power for up to five hours. Since the ZOE-M8Q is a tiny GPS receiver and to minimize its footprint， we've added a U.FL connector to allow the use of both large standard ceramic antennas as well as very small chip scale antennas.。Note：The I2C address of the ZOE-M8Q is 0x42 and is software configurable. A multiplexer/Mux is required to communicate to multiple ZOE-M8Q sensors on a single bus. If you need to use more than one ZOE-M8Q sensor consider using the Qwiic Mux Breakout.。The SparkFun Qwiic Connect System is an ecosystem of I2C sensors， actuators， shields and cables that make prototyping faster and less prone to error. All Qwiic-enabled boards use a common 1mm pitch， 4-pin JST connector. This reduces the amount of required PCB space， and polarized connections mean you can't hook it up wrong.。The ZOE-M8Q GPS Breakout can also be automatically detected， scanned， configured， and logged using the OpenLog Artemis datalogger system. No programming， soldering， or setup required!。Get Started With the SparkFun ZOE-M8Q Hookup Guide。Features。72-Channel GNSS Receiver。2.5m Horizontal Accuracy。18Hz Max Update Rate。Time-To-First-Fix：Cold：26s。Hot：1s。Max Altitude：50，000m。Max G：≦4。Max Velocity：500m/s。Velocity Accuracy：0.05m/s。Heading Accuracy：0.3 degrees。Time Pulse Accuracy：30ns。3.3V VCC and I/O。Current Consumption：～29mA Tracking GPS+GLONASS。Software Configurable。Geofencing。Odometer。Spoofing Detection。External Interrupt。Pin Control。Low Power Mode。Many others!。Supports NMEA， UBX， and RTCM protocols over UART or I2C interfaces

Description。The SparkFun NEO-M9N GPS Breakout is a high quality GPS board with equally impressive configuration options including SMA. The NEO-M9N module is a 92-channel u-blox M9 engine GNSS receiver， meaning it can receive signals from the GPS， GLONASS， Galileo， and BeiDou constellations with ～1.5 meter accuracy. This breakout supports concurrent reception of four GNSS. This maximizes position accuracy in challenging conditions increasing， precision and decreases lock time； and thanks to the onboard rechargeable battery， you'll have backup power enabling the GPS to get a hot lock within seconds! Additionally， this u-blox receiver supports I2C(u-blox calls this Display Data Channel)which makes it perfect for the Qwiic compatibility so we don't have to use up our precious UART ports. Utilizing our handy Qwiic system， no soldering is required to connect it to the rest of your system. However， we still have broken out 0.1"-spaced pins in case you prefer to use a breadboard.。The NEO-M9N module detects jamming and spoofing events and can report them to the host， so that the system can react to such events. A SAW(Surface Acoustic Wave)filter combined with an LNA(Low Noise Amplifier)in the RF path is integrated into the NEO-M9N module which allows normal operation even under strong RF interferences.。U-blox based GPS products are configurable using the popular， but dense， windows program called u-center. Plenty of different functions can be configured on the NEO-M9N：baud rates， update rates， geofencing， spoofing detection， external interrupts， SBAS/D-GPS， etc. All of this can be done within the SparkFun Arduino Library!。The SparkFun NEO-M9N GPS Breakout is also equipped with an on-board rechargeable battery that provides power to the RTC on the NEO-M9N. This reduces the time-to-first fix from a cold start(～24s)to a hot start(～2s). The battery will maintain RTC and GNSS orbit data without being connected to power for plenty of time.。This product requires an antenna：Be sure to check out the related products/hookup accessories and pick a suitable SMA antenna for your project.。The SparkFun Qwiic Connect System is an ecosystem of I2C sensors， actuators， shields and cables that make prototyping faster and less prone to error. All Qwiic-enabled boards use a common 1mm pitch， 4-pin JST connector. This reduces the amount of required PCB space， and polarized connections mean you can't hook it up wrong.。The NEO-M9N GPS Breakout can also be automatically detected， scanned， configured， and logged using the OpenLog Artemis datalogger system. No programming， soldering， or setup required!。Get Started With the SparkFun NEO-M9N GPS Guide。Features。Integrated SMA connector for use with antenna of your choice。92-Channel GNSS Receiver。1.5m Horizontal Accuracy。25Hz Max Update Rate(four concurrent GNSS)。Time-To-First-Fix：Cold：24s。Hot：2s。Max Altitude：80，000m。Max G：≦4。Max Velocity：500m/s。Velocity Accuracy：0.05m/s。Heading Accuracy：0.3 degrees。Time Pulse Accuracy：30ns。3.3V VCC and I/O。Current Consumption：～31mA Tracking GPS+GLONASS。Software Configurable。Geofencing。Odometer。Spoofing Detection。External Interrupt。Pin Control。Low Power Mode。Many others!。Supports NMEA， UBX， and RTCM protocols over UART or I2C interfaces

Description。It's time to effectively manage the power distribution into your project and with the SparkFun Power Delivery Board， you can! Traditional power adapters can provide a wide range of current but the voltage stays fixed at 5V. With the Spark

Description。The Mountable MI：pro is a simple and compact protective case for the micro：bit. This case has been specifically designed with portability and expansion in mind and is compatible with both the original micro：bit V1 and the micro：bit V2. These cases feature a three-layer construction style with ability to wall-mount the whole assembly onto any surface you want while still providing access to all buttons and ports on the micro：bit. Though these cases do feature wall-mountable tabs， the biggest benefit of using a case is to not accidentally short out the pads on the back of the micro：bit.。Construction is simple， requiring only a small flathead screwdriver， and involves layering each plate on top of one another around the micro：bit and screwing it into place. Luckily， the MI：pro case enables easy access to the edge pins at the bottom of the micro：bit， allowing it to still be plugged into an edge connector found on many of our carrier boards. The only board that cannot be used in conjunction with the MI：pro case is the SparkFun gamer：bit due to its edge connector being located in the center of the board.。Note：The MI：pro case only includes the parts found in the Includes Tab. This case does NOT include a micro：bit， power source or mounting screws. These items will need to be purchased separately.。Features。Dimensions：Length(minus the mounting brackets on the side)：65mm.。Length(with the mounting brackets on the side)：91mm.。Width：37mm.。Depth(without screws)：9mm.。Depth(with screws)：14mm.。Provides excellent protection to the BBC micro：bit whilst allowing access to the bottom pins.。Full access to the A and B buttons on the BBC micro：bit.。The mounting points allow you to fix the micro：bit to a surface for sturdy and more permanent installations.。Full access to pins and connections including the micro USB connector.。Clear case material shows the on-board LEDs in perfect clarity.。The case is compatible with versions 1 and 2 of the micro：bit.

Description。This is the Logitech C270 Webcam. With a sleek compact look and a black finish， this is not just for looks. This economical choice provides a 720p/30FPS HD resolution in a 16：9 widescreen format. The Logitech C270 webcam is compatible with most major messaging applications like Skype， Windows Live Messenger， Yahoo Messenger and more， giving you a wide selection of use.。Fluid Crystal technology provides smoother videos， sharper pictures， richer colors and clearer sound in real-world conditions. With the automatic light correction， even if you make a video call in dim or poorly backlit settings， the camera will intuitively adjust to produce the best possible image.。The built-in noise-reducing mic makes sure your voice comes across clearly， even if you're in busy surroundings. This flexible webcam comes with a universal clip for mounting so you can either attach it securely to your screen or sit it on a shelf.。Features。USB port。Max Resolution - 720p/30fps。16：9 Widescreen。Photo Resolution - 3MP。Focus Type - Fixed focus 40cm and beyond。Lens Type - Plastic。Auto Light Correction。Built-in mic with noise cancellation - mono。Field of View 60°

Description。This 8mp camera module is capable of 1080p video and still images that connect directly to your Raspberry Pi. This is the plug-and-play-compatible latest version of the Raspbian operating system， making it perfect for time-lapse photography， recording video， motion detection and security applications. Connect the included ribbon cable to the CSI(Camera Serial Interface)port on your Raspberry Pi， and you are good to go!。The board itself is tiny， at around 25mm×23mm×9mm and weighing in at just over 3g， making it perfect for mobile or other applications where size and weight are important. The sensor has a native resolution of 8 megapixel， and has a fixed focus lens on board. In terms of still images， the camera is capable of 3280×2464 pixel static images， and also supports 1080p30， 720p60 and 640x480p90 video.。Note：This module is only capable of taking pictures and video， not sound.。Features。Image Sensor：Sony IMX219。Maximum Photo Resolution：3280×2464 pixel。Supported Video Resolution：1080p30， 720p60 and 640x480p90。Physical Dimensions：25mm×23mm×9mm。Interface：CSI connector(15cm ribbon cable included)。Supported OS：Raspbian(latest version recommended)

Description。The ANN-MB-00 GNSS multiband antenna is extremely unique from other GNSS/GPS antennas in that it is designed to receive both the classic L1 GPS band and the newly launched(started in 2005)L2 GPS band. Additionally， the ANN-MB-00 from u-blox is extremely well built with both a magnetic base with mounting holes for additional anchoring for the harshest environments.。Designed for the latest u-blox F9 platform--including the ZED-F9P module--it provides a fast， easy， and reliable multi-band antenna solution but can be used with any GPS/GNSS receiver that can benefit from the L1/L2 dual reception.。This antenna supports GPS， GLONASS， Galileo， and BeiDou and includes a high-performance multi-band RHCP dual-feed patch antenna element， a built-in high-gain LNA with SAW pre-filtering， and a 5m SMA cable.。Features。Frequency：L1 Band：1559-1606MHz。L2/L5 Band：1197-1249MHz。Peak gain(over 15cm diameter ground plane)：L1 Band：3.5dBic。L2/L5 Band：0-2.0dBic。VSWR：max. 2。Bandwidth：min. 200MHz。Impedance：50 Ohm。Polarization RHCP。Supports GPS， GLONASS， Galileo， and BeiDou。5m coaxial cable with SMA connector。Magnetic base， fixed installation option(screw mount， 2×M4 screws)。Dimensions：60.0mm×82.0mm×22.5mm。Weight：175g(including cable)

Description。This MI：pro Protector Case for the BBC micro：bit has been designed to work with both the original micro：bit V1 and the micro：bit V2. These cases feature a four-layer construction style with ability to mount a 2xAAA battery pack to the back of the case while still providing access to all buttons and ports on the micro：bit. Though these cases do protect the micro：bit astoundingly well， the biggest benefit of using the MI：pro is to not accidentally short out the pads on the back of the micro：bit.。Construction is simple， requiring only a small flathead screwdriver(at most)， and involves layering each plate on top of one another around the micro：bit and screwing it into place. Luckily， the MI：pro Protector case enables easy access to the edge pins at the bottom of the micro：bit， allowing it to still be plugged into an edge connector found on many of our carrier boards. The only board that cannot be used in conjunction with the MI：pro case is the SparkFun gamer：bit due to its edge connector being located in the center of the board.。Note：The MI：pro Protector case only includes the parts found in the Includes Tab. This case does。NOT。include a micro：bit， power source or mounting screws. These items will need to be purchased separately.。Features。Dimensions：Length：65mm.。Width：37mm.。Depth(without screws)：12mm.。Depth(with screws)：18.5mm.。Provides excellent protection to the BBC micro：bit whilst allowing access to the bottom pins.。Full access to the A and B buttons on the BBC micro：bit.。Attach a battery cage to the rear of the case with the supplied sticky fixer.。Full access to pins and connections including the micro USB connector.。Clear case material shows the on-board LEDs in perfect clarity.。The case is compatible with versions 1 and 2 of the micro：bit.。When used in conjunction with a battery holder， micro：bit projects can be fully mobile.

Description。Access all the pins(i.e. ATP)of the MicroMod Processor Boards with the SparkFun MicroMod ATP Carrier Board! This board breaks out the MicroMod Processor Board's pins on the M.2 connector to 0.1" spaced female headers and PTH pads on the edge of the board. This Carrier Board is great if you're interested in testing out different MicroMod Processor Boards for your application.。A modern USB-C connector makes programming easy. In addition to the pins broken out， two separate Qwiic-enabled I2C ports allow you to easily daisy chain Qwiic-enabled devices. We've exposed the SWD pins for more advanced users who prefer to use the power and speed of professional tools. A USB-A connector is provided for Processor Boards that have USB Host support. A backup battery is provided for processor boards with RTC. If you need a "lot" of GPIO with a simple-to-program， ready for market module， the ATP is the fix you need. We've even added a convenient jumper to measure the current consumption for low power testing.。MicroMod is a modular interface ecosystem that connects a microcontroller "processor board" to various "carrier board" peripherals. Utilizing the M.2 standard， the MicroMod standard is designed to easily swap out processors on the fly. Pair a specialized carrier board for the project you need with your choice of compatible processor!。Get Started with the MicroMod ATP Carrier Board Guide。Features。M.2 Connector。Operating Voltage Range。～3.3V to 6.0V(via VIN to AP7361C 3.3V Voltage Regulator)。3.3V(via 3V3)。Ports [1]。1x USB type C。1x USB type A Host。2x Qwiic Enabled I2C。1x CAN。1x I2S。2x SPI。2x UARTs。2x Dedicated Analog Pins。2x Dedicated PWM Pins。2x Dedicated Digital Pins。12x General Purpose Input Output Pins。1x SWD 2x5 header。1mAh battery backup for RTC。Buttons。Reset。Boot。LEDs。Power。3.3V。Phillips #0 M2.5x3mm screw included。[1] Note：Depending on the design of the Processor Board， not all the pins may be accessible.

Description。The SparkFun TFT LCD Breakout is a versatile， colorful， and easy way to experiment with graphics or create a user interface for your project. With a 4-wire SPI interface and microSD card holder， you can use this breakout to easily add visual display/interface capabilities to a project as well as providing all the storage you might need for multimedia files.。To get started with this breakout， you will need an Arduino compatible microcontroller of your choice - we recommend something with extra RAM like the SparkFun Thing Plus. The breakout can be powered with either 5V or 3.3V. The microSD card holder is connected to the same SPI bus as the display which keeps the required pin count low and exists to relieve the burden from your microcontroller's poor memory due to having to store hundreds of images of cats， or really whatever you want to keep there. We have also gone ahead and tricked out the SparkFun HyperDisplay library with a driver made especially for this breakout!。Out of the box， the SparkFun TFT LCD Breakout will come with a large backing PCB that makes it easy to securely mount the display in a project. If you need a more flexible solution you can remove the display module， snap off half the backing board， and then re-insert the display module. When this is done you'll be left with the bare minimum frame around the display to more seamLessly integrate with your project.。Get Started With the SparkFun TFT LCD Breakout Guide。Features。128×160 RGB pixels。Up to 18 bit configurable color depth。2x PWM controllabele LED backlight。microSD Card Slot。V-Score for Minimal Footprint Setup

Description。The SparkFun OpenScale is a simple-to-use， open source solution for measuring weight and temperature. It has the ability to read multiple types of load cells and offers a simple-to-use serial menu to configure calibration value， sample rate， time stamp and units of precision.。Simply attach a four-wire or five-wire load cell of any capacity， plug the OpenScale into a USB port， open a terminal window at 9，600bps， and you'll immediately see mass readings. The SparkFun OpenScale will enable you to turn a load cell or four load sensors in a Wheatstone bridge configuration into the DIY weigh scale for your application.。The OpenScale was designed for projects and applications where the load was static(like the beehive in front of SparkFun HQ)or where constant readings are needed without user intervention(for example， on a conveyor belt system). A load cell with an equipped OpenScale can remain in place for months without needing user interaction!。On board the SparkFun OpenScale is the ATmega328P microcontroller， for addressing your communications needs and transferring your data to a serial terminal or to a data logger such as the OpenLog， an FT231 with mini USB， for USB to serial connection； the HX711， a 24-bit ADC for weigh scales； and the TMP102， for recording the ambient temperature of your system. The OpenScale communicates at a TTL level of 9，600bps 8-N-1 by default and possesses a baud rate configurable from 1，200bps to 1，000，000bps.。Get Started with the OpenScale Guide。Features。Operating Voltage：5V。Operating Ampage：80-100mA。Power Cycling above 500ms。Selectable 10SPS or 80SPS Output Data Rate。Local External Temperature Sensors。Fixed Adjustable Gain

Description。This 7" Raspberry Pi Touchscreen LCD provides you with the ability to create a standalone device that can be utilized as a custom tablet or an all-in-one interactive interface for a future project using your Raspberry Pi 3. Each LCD features a full color 800×480 capacitive touch display that connects to the Pi via an included adapter board which handles all of your power and signal conversion needs. An updated version of Raspbian OS on the A+， B+ and Pi2B is required for the display to work(the display does not work with the current version of Raspbian available on the Model A or B).。What makes this LCD great is the fact that it only requires two connections to be hooked up to the Pi； power from the Pi's GPIO port and a ribbon cable that connects to the DSI port present on all Raspberry Pi's. Touchscreen drivers with support for 10-finger touch and an on-screen keyboard allow you to use your Raspberry Pi without an external keyboard or mouse.。With this Raspberry Pi LCD you can create your own 'Internet of Things'(IoT)devices including a visual display by simply connecting your Pi， developing a easy Python script to interact with the display， and you'll be ready to create your own home automation devices with touch screen capability.。Note：The latest version of Raspbian OS is required for this Raspberry Pi LCD to operate correctly.。Features。7" Touchscreen Display.。Screen Dimensions：194mm×110mm×20mm(including standoffs)。Viewable screen size：155mm×86mm。70 degree viewing angle。Screen Resolution 800×480 pixels @ 60fps。24-bit color。10 finger capacitive touch.。Connects to the Raspberry Pi board using a ribbon cable connected to the DSI port.。Adapter board is used to power the display and convert the parallel signals from the display to the serial(DSI)port on the Raspberry Pi.

。Description。Who doesn't occasionally need power regulation? We certainly do， so we've designed the SparkFun BabyBuck Regulator Breakout to help us with just such a task. Featuring the AP63203 from Diodes Inc， this breakout board takes advantage of a 2A synchronous buck converter that has a wide input voltage range of 3.8V to 32V and fully integrated 125mΩ high-side power MOSFET/68mΩ lowside power MOSFET to provide high-efficiency step-down DC/DC conversion. All of this snuggled up in a low-profile， TSOT26 package that's integrated into a 0.4in by 0.5in board.。Unlike it's sibling， the BabyBuck sacrifices power option flexibility for space. Don't worry， though， because you can still use the plated through holes for input and output power. With some simple right-angle headers， you'll be up and running in no time.。Frequency Spread Spectrum(FSS)reduces EMI and a proprietary gate driver scheme resists switching node ringing without sacrificing MOSFET turn-on and turn-off times， which further erases high-frequency radiated EMI noise.。Get Started with the SparkFun Buck Regulator Hookup Guide。Features。Low-Profile Footprint。VIN 3.8V to 32V。VOUT 3.3V。Up to 2A Continuous Output Current。0.8V ± 1% Reference Voltage。22μA Ultralow Quiescent Current。Switching Frequency - 1.1MHz。Supports Pulse Frequency Modulation(PFM)。Up to 80% Efficiency at 1mA Light Load。Up to 88% Efficiency at 5mA Light Load。Fixed Output Voltage - 3.3V。Proprietary Gate Driver Design for Best EMI Reduction。Frequency Spread Spectrum(FSS)to Reduce EMI。Precision Enable Threshold to Adjust UVLO。Protection Circuitry。Overvoltage Protection。Cycle-by-Cycle Peak Current Limit。Thermal Shutdown

Description。The SparkFun RTK Surveyor is an easy to use GNSS receiver for centimeter-level positioning. Perfect for surveying， this preprogrammed device can also be used for autonomous driving， navigation， asset tracking and any other application where there is a clear view of the sky. The RTK Surveyor can also be used as a base station. With the flick of a switch， two RTK Surveyors can be used to create an RTK system capable of 14mm horizontal positional accuracy. The built-in Bluetooth(R)connection via an ESP32 WROOM enables the user to use the RTK Surveyor with their choice of GIS application on a phone or tablet. The built in battery allows field use for up to four hours and is compatible with common USB battery banks.。This device can be used in four modes：GNSS Positioning(～30cm accuracy)。GNSS Positioning with RTK(1.4cm accuracy)。GNSS Base Station。GNSS Base Station NTRIP Server。In Position mode the device receives L1/L2 signals from a user-provided antenna and the high-grade GNSS receiver provides lat/long and altitude with accuracies around 300mm.。In Positioning with RTK mode the device receives L1/L2 signals from the antenna and correction data from a base station. The correction data can be obtained from a cellular link to online correction sources or over a radio link to a 2nd RTK Surveyor setup as a base station.。In Base Station mode the device is mounted to a temporary position(like a tripod)and begins transmitting correction data over a radio or internet connection. A base is often used in conjunction with a second unit set to 'Positioning with RTK' to obtain the 14mm relative accuracy.。In Base Station NTRIP Server mode the device is mounted to a semi or permanently fixed position(like a roof)and connects over WiFi to transmit the correction data to a NTRIP caster so that any rover can access the correction data over a cellular or internet connection. This type of base is a very easy way to setup a very precise absolute correction source.。Two cables are provided with the RTK Surveyor allowing a user to plug on our easy to use Serial Telemetry Radios or their own radio link. If a local correction source is within 10km， a user can also use their phone to provide correction data over the Bluetooth(R)link(no external radio needed!).。Note：The SparkFun RTK Surveyor is just the enclosed device and does NOT include an antenna， serial telemetry radio， or associated mounting pieces. These items will need to be purchased separately from the Hookup Accessories below.。Get Started With the SparkFun RTK Surveyor Guide。Features。GNSS Receiver：ZED-F9P。Concurrent reception of GPS， GLONASS， Galileo and BeiDou。Receives both L1C/A and L2C bands。Current：68mA - 130mA(varies with constellations and tracking state)。Time to First Fix：25s(cold)， 2s(hot)。Max Navigation Rate：PVT(basic location over UBX binary protocol)- 25Hz。RTK - 20Hz。Raw - 25Hz。Horizontal Position Accuracy：2.5m without RTK。0.010m with RTK。Max Altitude：50km(31 miles)。Max Velocity：500m/s(1118mph)。Bluetooth(R)Transceiver：ESP32 WROOM。Xtensa(R)dual-core 32-bit LX6 microprocessor。Up to 240MHz clock frequency。16MB of flash storage。520kB internal SRAM。Integrated 802.11 BGN WiFi transceiver。Integrated dual-mode Bluetooth(R)(classic and BLE)。Hardware accelerated encryption(AES， SHA2， ECC， RSA-4096)。2.5 μA deep sleep current。Overall Device。Internal Battery：LiPo 1000mAh with 500mA charging。Radio Port：3.3V TTL Serial(57600bps RTCM TX/RX)。Data Port：3.3V TTL Serial(115200bps NMEA)。Weight：132g(entire device including battery)。Dimensions：118mm×79mm×30mm(4.7in×3.1in×1.2in)。1x Qwiic Connector。1x microSD Socket for optional logging。Changes：This version(which replaces SPX-17369)uses a reinforced edge mount SMA connector for better resiliency when a fixed 'stub' antenna is used.

。Description。Sometimes we want our projects on， but sometimes we want to turn them off for a while to save power. The SparkFun Nano Power Timer will run while only consuming minimal power(approximately 35nA)and turn your project on after a set amount of time. When you are done polling your sensors， posting data to the web， writing to your logger， or planning world domination， your microcontroller can tell the Nano Power Timer to turn off the power. No more running your microcontroller all day when you only want to read the ambient temperature once per hour.。The TPL5110 delay is configured with the use of resistors. We've added a six-way DIP switch to select one of the five preinstalled resistors. The sixth switch is attached to a pad to add your own PTH(or SMD)resistor. The delays associated with the preinstalled headers are shown on the bottom of the board for quick setup. Additionally， you can select more than one switch to combine the resistors in parallel(up to 26 options not including the custom resistor)， check out the hookup guide for a nice chart as to the total resistance and corresponding delay for each combination.。The Nano Power Timer can handle voltages between 1.8V and 5.5V as well as current up to 1.1A with times from 100ms to two hours(preconfigured settings range from 30s to 2h). You will find a button on the board which will allow you a quick override to the delay so you can turn your project on whenever you like.。Get Started with the SparkFun Nano Power Switch。Features。Supply Voltage：1.8V to 5.5V。Current consumption at 2.5V：35nA Typical(50nA Max)。Selectable Time intervals：100ms to 7200s(2 hours)。Timer Accuracy：1%

。Description。The Leopard Imaging Camera is a 136° FOV(field of view)wide angle camera module that is great for machine vision applications， and designed specifically to be compatible with the NVIDIA Jetson Nano Developer Kit. This camera incorporates a Sony IMX219 8.08MP color sensor， a fixed focus(M8)lens， and utilizes CSI-2 MIPI 2-lane data output interface.。This is the same camera that we include in the SparkFun Jetbot v2.1 Kit.。Note：SparkFun has not established the compatibility of this camera with Raspberry Pi. We are currently working with the manufacturer， but due to firmware restrictions Leopard cameras do not work with any Raspberry Pi's at this time.。Features。Field of view(FOV)：136°。Module size：150mm(L)x 25mm(W)。Sensor type：Sony IMX219 8.08MP color sensor。Active pixels：3280(H)x 2464(V)。Image size：Diagonal 4.60mm(Type 1/4.0)。F/No：2.0(H136)。Focal length：1.58mm(H136)。TV distortion：<-15%(H136)。Focusing range：30cm - Infinity。Lens type：Fixed Focus(M8 lens)。Pixel size：1.12um×1.12um。Data output interface：CSI-2 MIPI 2-lane。IR Cutter Filter：Yes

Description。This small breakout board couples an Electret microphone(100Hz--10kHz)with a 60x mic preamplifier to amplify the sounds of voice， claps， door knocks or any sounds loud enough to be picked up by a microcontroller's analog-to-digital converter. Each breakout comes fully assembled and works from 2.7V up to 5.5V.。The Electret Mic Breakout translates amplitude(not volume)by capturing sound waves between two conducting plates(one a vibrating diaphragm and the other fixed)in the microphone and converting them into electrical waves. These electrical signals are then amplified and picked up by your microcontroller's ADC.。Get Started With the Electret Microphone Guide!

Description。Sometimes referred to as "spade connectors，" these quick disconnects are really useful as power connectors in prototyping or in projects that are repeatedly assembled and disassembled. The shape of these connectors allows them to be used with a variety of retro game-cabinet buttons， as well as lights similar to the ones found in our Spectacle line.。These Female Quick Disconnects are about 1/4" wide， come in packs of five， and can be affixed to a 16-14 AWG wire. Mating connectors can be found in the similar items section below.

Description。This is the Antenna Kit for the Raspberry Pi 4 Compute Module wireless variants. The "duck" style antenna adds range to the wireless radio on the wireless enabled Compute Modules. Something quite desirable if you're working in industrial environments or other places a Compute Module would be used and the potential for signal interference is present. The antenna connects to the board via the press-fit U.FL connector on board the compute module(see photos for more details).。This kit contains an antenna， bulkhead fixture， and SMA to U.FL Cable.。Features。Frequency range：2400-2500/5100-5800 MHz。Bandwidth：100-700MHz。VSWR：≦ 2.0。Gain：2 dBi。Impedance：50 ohm。Polarisation：Vertical。Radiation：Omnidirectional。Maximum power：10W。Antenna dimensions：108 mm×10 mm

。Description。The HM01B0 from Himax Imaging is an ultra low power CMOS Monochrome Image Sensor that enables the integration of an "Always On" camera for computer vision applications such as gestures， intelligent ambient light and proximity sensing， tracking and object identification. The sensor allows the sensor to consume very low power of <2mW at QVGA 30FPS. This low power consumption and vision applications camera comes with a ribbon cable that mates to the camera connector populated on the following products：MicroMod Machine Learning Carrier Board。Artemis Development Kit。Edge Development Board - Apollo3 Blue。The HM01B0 contains 320×320 pixel resolution and supports a 320×240 window mode which can be readout at a maximum frame rate of 60FPS， and a 2×2 monochrome binning mode with a maximum frame rate of 120FPS. The video data is transferred over a configurable 1bit， 4bit or 8bit interface with support for frame and line synchronization. The sensor integrates black level calibration circuit， automatic exposure and gain control loop， self-oscillator and motion detection circuit with interrupt output to reduce host computation and commands to the sensor to optimize the system power consumption.。Features。Image Sensor。Ultra Low Power Image Sensor(ULPIS)designed for Always On vision devices and applications。High sensitivity 3.6μ BrightSenseTM pixel technology。320×320 active pixel resolution with support for QVGA window， vertical flip and horizontal mirror readout。Programmable black level calibration target， frame size， frame rate， exposure， analog gain(up to 8x)and digital gain(up to 4x)。Automatic exposure and gain control loop with support for 50 / 60Hz flicker avoidance。Flexible 1bit， 4bit and 8bit video data interface with video frame and line sync。Motion Detection circuit with programmable ROI and detection threshold with digital output to serve as an interrupt。On-chip self oscillator。I2C 2-wire serial interface for register access。High CRA for low profile module design。Sensor Parameters。Active Pixel Array 320×320。Pixel Size 3.6 μm×3.6 μm。Full Image Area 1152 μm×1152 μm。Diagonal(Optical Format)1.63 mm(1/11″)。Scan Mode：Progressive。Shutter Type：Electronic Rolling Shutter。Frame Rate MAX 51 fps @ 320×320， 60 fps @ 320×240(QVGA)。CRA(maximum)30℃。Sensor Specifications。Supply Voltage：Analog - 2.8 V， Digital - 1.5V(Internal LDO：1.5V - 2.8V)， I/O - 1.5 - 2.8V。Input Reference Clock：3 - 50 MHz。Serial Interface(I2C)：2-wire， 400 KHz max.。Video Data Interface：1b， 4b， 8b with frame / line SYNC。Output Clock Rate MAX：50 MHz for 1bit， 12.5 MHz for 4bit， 6.25 MHz for 8bit。Est. Power Consumption(include IO with 5pF load)：QVGA 60FPS(Typical)<4 mW。QVGA 30FPS(Typical)<2 mW

Description。One ruler to rule them all. This is a basic 12 inch ruler， but made from a PCB. We have included a lots of useful information on each side of the ruler that you might use on a daily basis including Wire Gauge holes， transistor diagrams， common fractions， Roman numerals， and metric to imperial conversions. Most importantly， the ruler provides you with a straight line and centimeter markings one side and inch markings on the other side.。You'll also find a small protractor in the middle for all your angle measurement needs. While we figured you have a fairly good idea how to use a ruler we do have a tutorial to explain all the information you'll see!。Get Started with the How to use a Ruler Guide。Features。12 inch PCB ruler with markings down to 0.05" or 1/32"。30.48 cm PCB ruler with markings down to 0.1mm。Electrical Equations such as Ohm's Law and Parallel Resistors。Keyboard Alt Codes。Color Wavelengths。Protractor。Metric Prefix Summary Chart。Metric conversions。Morse Code。Transistor Diagrams。Roman Numerals。Fraction Summary。Wire Guage Chart。Tap and Drill Chart。Size：12"x 1.5"

Description。These inserts are great for easy and flexible work holding solutions. You could strategically place a few to hold down material in a jig or fixture， or install in a grid pattern to turn your wasteboard into a threaded table by installing these threaded inserts.。Installation is easy， simply create a 9mm pilot hole， then thread the insert into the hole.。Both the inch and metric come in packs of 100 inserts and include a 6mm hex key and 6mm hex driver for installation. The hex driver can be used with a cordless drill for quick installation.。Features。6mm Hex(on both Imperial and Metric versions)。Length：13mm(～1/2")。Maximum Hole Size：9mm(0.354"， Letter T Drill)。1/4-20 thread

Grove - Wrapper is a kind of wrapper to fix and protect Grove modules. It will save you a lot of work on aligning your modules、and it will easy for you to show your project. For example、it will simpler to take pictures for showing your product on the Internet、and it will give a clear and clean scene if you use Grove - Wrapper to demo your project. What is more、it is expandable for Lego、mechanical parts、and so on、this will introduce flavor into your work and make your project adapt to various circumstances. The mechanical design of Grove - Wrapper also make it easy to assemble and disassemble modules.。Notethat around 85% of all Grove modules are supported by Grove - Wrapper.。Features。Flex fastener to install and replace Grove modules conveniently.。Always keep your project safe.。Half-open space、no disruption for using Grove modules.。Compatible with Lego and Makeblock modules that will make your project adapting and interesting.。Support being fastened with screws(M2、M4).。Mutual-connect-able like Lego modules does.。Colorful wrappers.。Specification。Dimension(big one)：50×25×13 mm。Plane dimension(small one)：25 ×25×13 mm。Material：ABS