「dinork」の検索結果

上下移動ダイヤルにより、緻密な焦点合わせが可能。アームは360 度自由に回転。アルミ素材を適所に配置し耐久性と軽量化を両立。高倍率モデルを含むあらゆるレンジのモデルにお使い頂けます。また精密スタンドDINORK10と共通のアクセサリー類を使用することができます。

精密焦点ダイヤルにより、緻密な焦点合わせが可能。クイックリリースボタンで上下移動も簡単。アームは360 度自由に回転。ステンレスとアルミ素材を適所に配置し耐久性と軽量化を両立。静電防止仕様。高倍率時モデルを含むあらゆるレンジのモデルにお使い頂けます。

精密スタンドRK10 のアームに取り付け、アームを延長できます。延長アームの長さは約15cm。また水平方向に回転させることが可能。対象物が離れていたり大きさがある場合でも自由に位置取りができます。

持ち運びが便利なポータブルサイズ、高さの微調整ダイヤル付きスタンド

上下移動の微調整が行える2種類のダイヤル付きスタンド

精密スタンドRK10 のアームに取り付け、アームを自由な方向に延長できます。 フレキシブルアームの長さは約29cmあり、対象物との距離や角度を自由に設定できます。 ピボット式ヘッド部分は回転できるので様々な角度からの観察が可能です。 RK10以外のスタンドにも取り付けられます。

RKシリーズ用のシャーレホルダーを取り付ければ、シャーレ内の対象物を観察できます。中央に穴が開いているので、下からライトを当てたり、Dino-Liteとシャーレホルダーの上下を入れ替えることで、下からの観察も可能です。

精密スタンドRK10 のアームに取り付け、アームを垂直方向に延長できます。延長アームの高さは約15cm。対象物との距離をより高くとりたい場合に便利です。

DescriptionIntroducing the SparkFun FT231X Breakout board， complete with the full UART hardware handshake feature! The pin-out of this board matches the FTDI cable to work with official Arduino and cloned Arduino boards. It can also be used for general serial applications.This board still brings out the DTR pin as opposed to the RTS pin of the FTDI cable. The DTR pin allows an Arduino target to auto-reset when a new Sketch is downloaded. This is a really nice feature to have and allows a sketch to be downloaded without having to hit the reset button. This board will auto-reset any Arduino board that has the reset pin brought out to a 6-pin connector.The coolest thing about the FT231X Breakout is that we have broken out ALL the pins for your use， making this board all the more hackable! It also uses a common microUSB jack.One of the features of this board is a jumper on the back， which allows the VCC output to be configured to either 3.3V or 5V. This board ships default to 5V， but you can cut the default trace and add a solder jumper if you need to switch to 3.3V. It should be noted that the max input of the FT231X is only 3.3V， but it can operate down to 1.8V with external pull-ups and is also 5V tolerant.

DescriptionThe SparkFun 3.3V FTDI Starter Kit gives you just what you need to get started with FTDI FT232RL USB to serial IC. The pinout of the included board matches the FTDI cable standard to work with official Arduino and cloned 3.3V Arduino boards. It can also be used for general serial applications. The major difference with this board is that it brings out the DTR pin as opposed to the RTS pin of the FTDI cable. The DTR pin allows an Arduino target to auto-reset when a new Sketch is downloaded. This is a really nice feature to have and allows a sketch to be downloaded without having to hit the reset button. This board will auto reset any Arduino board that has the reset pin brought out to a 6-pin connector.The SparkFun FTDI Basic Breakout was designed to decrease the cost of Arduino development and increase ease of use(the auto-reset feature rocks!). Our Arduino Pro and LilyPad boards use this type of connector.The included cable is a USB 2.0 type B to Mini-B 5-pin black cable.

DescriptionThis is SparkFun Beefy 3 FTDI Basic Breakout for the FTDI FT231X USB to serial IC. The pinout of this board matches the FTDI cable to work with official Arduino and cloned 3.3V Arduino boards. It can also be used for general serial applications. Built upon the same foundation as our 3.3V SparkFun FTDI Basic Breakout， the Beefy 3 is equipped with an AP2112K voltage regulator making this FTDI basic breakout board capable of handling a current load of up to 600 mA! With the addition of a more "Beefy" voltage regulator your will now be able to power a 3.3V project directly from the FTDI. The pinout of this board matches the FTDI cable to work with official Arduino and cloned 3.3V Arduino boards.This board brings out the DTR pin as opposed to the RTS pin of the FTDI cable. The DTR pin allows an Arduino target to auto-reset when a new Sketch is downloaded. This is a really nice feature to have and allows a sketch to be downloaded without having to hit the reset button. This board will auto reset any Arduino board that has the reset pin brought out to a 6-pin connector. The pins labeled BLK and GRN correspond to the colored wires on the FTDI cable. The black wire on the FTDI cable is GND， green is DTR. Use these BLK and GRN pins to align the FTDI basic board with your Arduino target.There are pros and cons to the FTDI Cable vs the FTDI Basic. This board has TX and RX LEDs that allow you to actually see serial traffic on the LEDs to verify if the board is working， however this board now requires a Micro-B USB cable. The FTDI Cable is well protected against the elements， but is large and cannot be embedded into a project as easily. The FTDI Basic uses DTR to cause a hardware reset where the FTDI cable uses the RTS signal.This board was designed to decrease the cost of Arduino development and increase ease of use(the auto-reset feature rocks!). Our Arduino Pro and LilyPad boards use this type of connector.

DescriptionThis Low Profile Vise provides you with a compact workholding accessory for the Nomad 883 Pro. Each one of these vises are made from scratch， in-house at Carbide 3D， and includes everything you need to attach it to your Nomad. With the Low Profile Vise you will be able to create miniature and small silhouette milling projects.The Low Profile Vise has a maximum clamping width of 6.5in(～165mm)and is only 8in(～203mm)long and 2in(～50mm)wide. It should go without saying that this vise will easily provide you the ability to mill and fabricate more unique objects!

X軸・Y軸方向に精密に動かす事ができる、 RK10/RK06/RK06F/RK05F/RK04F用のポジショニングアーム。

多彩な使い方が可能。緻密焦点ダイヤルにより、緻密な焦点合わせが可能 緻密焦点ダイヤルにより、緻密な焦点合わせが可能。 ステンレスとアルミ素材を適所に配置し耐久性と軽量化を両立。 静電気防止使用。高倍率時モデルを含むあらゆるレンジのモデルにお使いいただけます。