「wins a-force」の検索結果

DescriptionThe PQ12 series of micro linear actuators are ideal for applications requiring precise positioning and compact size. Weighing in at just 22 grams， the PQ12 is incredibly light as well as compact. The affordably-priced PQ12 is the most powerful actuator of it's size. This is why it has become a popular choice for OEM manufacturers as well as Arduino and RC hobbyists. Some industries where the PQ12 are in use include：prosthetics， robotics， medical， simulation.The PQ12-R series of linear servos operate as a direct replacement for standard rotary servos. They use the same standard 3 wire connector， ground power and control. Regardless of how you drive your servos， be it with an RC receiver， an Arduino board， or a VEX micro-controller， the PQ12-R servo will function in place of a regular servo， but with the added benefit of providing linear motion. The PQ12-R is available in a 20mm stroke coupled with gear ratio options of 30：1， 63：1 and 100：1 cover a large variety of applications.The PQ12-100-6-R has：a 100：1 gear ratio for maximum lifting force； 6VDC operating voltage； and a servo(PWM)interface. This powerful little actuator can lift 50N(～5kg)!The datasheet doesn't mention a minimum operating voltage， but we've tested this actuator at 5VDC and it seems to work just fine. The maximum force and movement speed are reduced of course.FeaturesGearing Option：100：1Peak Power Point：40N @ 6mm/sPeak Efficiency Point：20N @ 8mm/sMax Speed(no load)：10mm/sMax Force(lifted)：50NMax Side Load：10NBack Drive Force：35NStroke：20 mmInput Voltage：6 VDCStall Current：550mA @ 6VMass：22gOperating Temperature -10℃ to +50℃Positional Repeatability：±0.1mmMechanical Backlash：0.25 mmAudible Noise：55dB @ 45cmIngress Protection：IP-54Maximum Duty Cycle：20%PWM(Servo)signal：Fully retracted：2.0ms @ 50HzFully extended：1.0ms @ 50Hz

DescriptionThis is a piezoresistive force sensor from Tekscan. The harder you press， the lower the sensor's resistance. Pressing hard， the resistance changes from infinite to ～300k. The sensor itself is thin and flexible， but the resistance does not change while being flexed. Resistance changes only when pressure is applied to the round area at the end of the sensor. Used as a presence sensor(someone standing)， weight sensor， pressure sensor(impact testing)， etc.The overall length is about 8.5". Sensor comes with 0.1" spaced， reinforced， breadboard friendly connector.This sensor comes in three flavors. This sensor ranges from 0 to 25lbs of pressure.