制御機器 ：「ITC」の検索結果

The RS Pro DC switching relay for PCB mounting is used in applications where there isneed for fast switching of small DC loads withhigh input/output insulation of more than 4000 VACrms. The DC switching relay always switches on and off in accordance with the applied control voltage.Miniature DC SSR mounted on Din EN adapter Control voltage4.25VDC 32VDC Isolation inputoutput4000 VACrms Operating Temp: -200℃ to 800℃ (-40°F1760°F) Blocking Voltage 60VDC Dropout VoltageVDC Minimal Operational Load 1mA Surface mount technology Switching Frequency <100Hz Off state leakage current <0.01mADC Potting compound Flame retardant Silicone rubber

The RS Pro DC switching relay for PCB mounting is used in applications where there isneed for fast switching of small DC loads withhigh input/output insulation of more than 4000 VACrms. The DC switching relay always switches on and off in accordance with the applied control voltage.Miniature DC SSR mounted on Din EN adapter Control voltage 4.25VDC 32VDC Isolation inputoutput 4000 VACrms Operating Temp -200℃ to 800℃ (-40°F1760°F) Blocking Voltage 60VDC Dropout VoltageVDC Minimal Operational Load 1mA Surface mount technology Switching Frequency <100Hz Off state leakage current <0.01mADC Potting compound Flame retardant Silicone rubber. Extende life， flexible encapsulation

The RS ProSolid State Relay family designed to switch various loads such as heating elements， motors and transformers. The relay is capable of switching high voltages up to 600 VACrms. The built-in varistor secures transient protection for heavy industrial applications.3 phase 55A per phase solid state relay Control voltage: 24-275 VAC24-50 VDC Zero Switching Rated operational voltage: 42-530VACrms Blocking Voltage 1200Vp Non rep surge current t=10ms 600Ap Drop out voltage 1.2VDC Input current <23mA On-state Voltage drop1.6Vrms Industrial housing Built in LED Built in varistor， suitable for heavy applications Response time pickup @50Hz= 10ms Operating temp: -300℃ to 800℃ (-220°F to 176°F)

The RS Pro RM1D series expands of DC solid state switching solutions up to 100for supply voltages up to 60 VDC， up to 50for supply voltages of maximum 200 VDC and up to 10for supply voltages of maximum 500 VDC. This new range is suitable for panel mounting or for mounting onheatsink. The switching of the RM1D is controlled byDC voltage in the range ofto 32 V. An LED indicates control voltage presence on the SSR.DC Panel Mount SSR 60VDC 100A 4- 32VDC Control Voltage， with LED indication High switching frequency 1000Hz Clip on IP20 Terminal Cover Self-lifting terminals Isolation inputoutput: 3750 Vrms Operational voltage1 VDC -60 VDC Leakage currentrated voltage: 0.1 mADC Pickup Voltage:VDC Dropout voltage: 1.2 VDC Response Pickup<100 Us Operating Temp-200℃ to 800℃ (-40°F1760°F)

RS PRO DIN Rail Mount OptocouplersRS PRO DIN Mount Optocouplers are designed to drive a signal from one electrical circuit to another. By using just light to provide isolation between an input source and an output load， it offers phenomenal levels of optic coupling isolation. This prevents electrical interference and results in a fast switching frequency for your precise requirements.Features and Benefits . DIN rail mount optocoupler. LED input. Highly precise with 10 times faster switching capacity. Slim design. Resistant to dust and humidity. Operating temperature range of -25℃ to +60℃. Dimensions of 60.8 mm x 67.5 mm x 6.1 mm. RoHS (Restriction of Hazardous Substances) compliantRS PRO DIN Rail Mount Optocoupler OptionsRS PRO Optocoupler series are available with a range of different rated input voltages and currents， all offering a quick frequency switching connection:. Rated input voltage， 5V DC & 15 - 18mA； RS Stock no: (212-5492) 212-5492. Rated input voltage， 5V DC & 10 - 15mA； RS Stock no: (212-5496) 212-5496. Rated input voltage， 24V DC & 12 -14mA； RS Stock no: (212-5493) 212-5493. Rated input voltage， 24 VDC & 10 - 15mA； RS Stock no: (212-5497) 212-5497. Rated input voltage， 95 - 125V AC & 0.6 - 1.3mA； RS Stock no: (212-5494) 212-5494. Rated input voltage， 90 - 265V AC & 10mA； RS Stock no: (212-5499) 212-5499. Rated input voltage， 200 - 240V AC & 0.6 - 1.1mA； RS Stock no: (212-5495) 212-5495ApplicationsRS PRO optocoupler can be used in a wide range of applications such as；. Communications equipment. Process automation. Machine controlsWhy would you choose RS PRO for DIN Rail Mount Optocouplers.RS PRO is our own brand range providing you with a wide variety of high-quality， great value products. Trusted by engineers all over the world， every part of all RS PRO products is rigorously tested against demanding industry standards. Products are only given the RS PRO seal of approval if we are confident of their exceptional quality， which means you can be confident too.

RS PRO DIN Rail Mount OptocouplersRS PRO DIN Mount Optocouplers are designed to drive a signal from one electrical circuit to another. By using just light to provide isolation between an input source and an output load， it offers phenomenal levels of optic coupling isolation. This prevents electrical interference and results in a fast switching frequency for your precise requirements.Features and Benefits . DIN rail mount optocoupler . LED input . Highly precise with 10 times faster switching capacity . Slim design . Resistant to dust and humidity . Operating temperature range of -25℃ to +60℃ . Dimensions of 60.8 mm x 67.5 mm x 6.1 mm . RoHS (Restriction of Hazardous Substances) compliantRS PRO DIN Rail Mount Optocoupler OptionsRS PRO Optocoupler series are available with a range of different rated input voltages and currents， all offering a quick frequency switching connection:. Rated input voltage， 5V DC & 15 - 18mA； RS Stock no: (212-5492) 212-5492 . Rated input voltage， 5V DC & 10 - 15mA； RS Stock no: (212-5496) 212-5496 . Rated input voltage， 24V DC & 12 -14mA； RS Stock no: (212-5493) 212-5493 . Rated input voltage， 24 VDC & 10 - 15mA； RS Stock no: (212-5497) 212-5497 . Rated input voltage， 95 - 125V AC & 0.6 - 1.3mA； RS Stock no: (212-5494) 212-5494 . Rated input voltage， 90 - 265V AC & 10mA； RS Stock no: (212-5499) 212-5499 . Rated input voltage， 200 - 240V AC & 0.6 - 1.1mA； RS Stock no: (212-5495) 212-5495ApplicationsRS PRO optocoupler can be used in a wide range of applications such as；. Communications equipment . Process automation . Machine controlsWhy would you choose RS PRO for DIN Rail Mount Optocouplers.RS PRO is our own brand range providing you with a wide variety of high-quality， great value products. Trusted by engineers all over the world， every part of all RS PRO products is rigorously tested against demanding industry standards. Products are only given the RS PRO seal of approval if we are confident of their exceptional quality， which means you can be confident too.

RS PRO DIN Rail Mount OptocouplersRS PRO DIN Mount Optocouplers are designed to drive a signal from one electrical circuit to another. By using just light to provide isolation between an input source and an output load， it offers phenomenal levels of optic coupling isolation. This prevents electrical interference and results in a fast switching frequency for your precise requirements.Features and Benefits . DIN rail mount optocoupler. LED input. Highly precise with 10 times faster switching capacity. Slim design. Resistant to dust and humidity. Operating temperature range of -25℃ to +60℃. Dimensions of 60.8 mm x 67.5 mm x 6.1 mm. RoHS (Restriction of Hazardous Substances) compliantRS PRO DIN Rail Mount Optocoupler OptionsRS PRO Optocoupler series are available with a range of different rated input voltages and currents， all offering a quick frequency switching connection:. Rated input voltage， 5V DC & 15 - 18mA； RS Stock no: (212-5492) 212-5492. Rated input voltage， 5V DC & 10 - 15mA； RS Stock no: (212-5496) 212-5496. Rated input voltage， 24V DC & 12 -14mA； RS Stock no: (212-5493) 212-5493. Rated input voltage， 24 VDC & 10 - 15mA； RS Stock no: (212-5497) 212-5497. Rated input voltage， 95 - 125V AC & 0.6 - 1.3mA； RS Stock no: (212-5494) 212-5494. Rated input voltage， 90 - 265V AC & 10mA； RS Stock no: (212-5499) 212-5499. Rated input voltage， 200 - 240V AC & 0.6 - 1.1mA； RS Stock no: (212-5495) 212-5495ApplicationsRS PRO optocoupler can be used in a wide range of applications such as；. Communications equipment. Process automation. Machine controlsWhy would you choose RS PRO for DIN Rail Mount Optocouplers.RS PRO is our own brand range providing you with a wide variety of high-quality， great value products. Trusted by engineers all over the world， every part of all RS PRO products is rigorously tested against demanding industry standards. Products are only given the RS PRO seal of approval if we are confident of their exceptional quality， which means you can be confident too.

RS PRO DIN Rail Mount OptocouplersRS PRO DIN Mount Optocouplers are designed to drive a signal from one electrical circuit to another. By using just light to provide isolation between an input source and an output load， it offers phenomenal levels of optic coupling isolation. This prevents electrical interference and results in a fast switching frequency for your precise requirements.Features and Benefits . DIN rail mount optocoupler. LED input. Highly precise with 10 times faster switching capacity. Slim design. Resistant to dust and humidity. Operating temperature range of -25℃ to +60℃. Dimensions of 60.8 mm x 67.5 mm x 6.1 mm. RoHS (Restriction of Hazardous Substances) compliantRS PRO DIN Rail Mount Optocoupler OptionsRS PRO Optocoupler series are available with a range of different rated input voltages and currents， all offering a quick frequency switching connection:. Rated input voltage， 5V DC & 15 - 18mA； RS Stock no: (212-5492) 212-5492. Rated input voltage， 5V DC & 10 - 15mA； RS Stock no: (212-5496) 212-5496. Rated input voltage， 24V DC & 12 -14mA； RS Stock no: (212-5493) 212-5493. Rated input voltage， 24 VDC & 10 - 15mA； RS Stock no: (212-5497) 212-5497. Rated input voltage， 95 - 125V AC & 0.6 - 1.3mA； RS Stock no: (212-5494) 212-5494. Rated input voltage， 90 - 265V AC & 10mA； RS Stock no: (212-5499) 212-5499. Rated input voltage， 200 - 240V AC & 0.6 - 1.1mA； RS Stock no: (212-5495) 212-5495ApplicationsRS PRO optocoupler can be used in a wide range of applications such as；. Communications equipment. Process automation. Machine controlsWhy would you choose RS PRO for DIN Rail Mount Optocouplers.RS PRO is our own brand range providing you with a wide variety of high-quality， great value products. Trusted by engineers all over the world， every part of all RS PRO products is rigorously tested against demanding industry standards. Products are only given the RS PRO seal of approval if we are confident of their exceptional quality， which means you can be confident too.

RS PRO DIN Rail Mount OptocouplersRS PRO DIN Mount Optocouplers are designed to drive a signal from one electrical circuit to another. By using just light to provide isolation between an input source and an output load， it offers phenomenal levels of optic coupling isolation. This prevents electrical interference and results in a fast switching frequency for your precise requirements.Features and Benefits . DIN rail mount optocoupler. LED input. Highly precise with 10 times faster switching capacity. Slim design. Resistant to dust and humidity. Operating temperature range of -25℃ to +60℃. Dimensions of 60.8 mm x 67.5 mm x 6.1 mm. RoHS (Restriction of Hazardous Substances) compliantRS PRO DIN Rail Mount Optocoupler OptionsRS PRO Optocoupler series are available with a range of different rated input voltages and currents， all offering a quick frequency switching connection:. Rated input voltage， 5V DC & 15 - 18mA； RS Stock no: (212-5492) 212-5492. Rated input voltage， 5V DC & 10 - 15mA； RS Stock no: (212-5496) 212-5496. Rated input voltage， 24V DC & 12 -14mA； RS Stock no: (212-5493) 212-5493. Rated input voltage， 24 VDC & 10 - 15mA； RS Stock no: (212-5497) 212-5497. Rated input voltage， 95 - 125V AC & 0.6 - 1.3mA； RS Stock no: (212-5494) 212-5494. Rated input voltage， 90 - 265V AC & 10mA； RS Stock no: (212-5499) 212-5499. Rated input voltage， 200 - 240V AC & 0.6 - 1.1mA； RS Stock no: (212-5495) 212-5495ApplicationsRS PRO optocoupler can be used in a wide range of applications such as；. Communications equipment. Process automation. Machine controlsWhy would you choose RS PRO for DIN Rail Mount Optocouplers.RS PRO is our own brand range providing you with a wide variety of high-quality， great value products. Trusted by engineers all over the world， every part of all RS PRO products is rigorously tested against demanding industry standards. Products are only given the RS PRO seal of approval if we are confident of their exceptional quality， which means you can be confident too.

RS PRO 10 Pole Jumper LinkFrom RS PRO a high-quality jumper link designed for use with Optocouplers. This jumper link is male with a straight orientation， has 10 contact poles， 6.1mm pitch and a voltage rating of 630V.Also known as；. Side insert bridge . Short circuit platesFeatures and Benefits. 10 Poles . Operating Temperature -40℃ to 105℃ . Insulating material: PA66 . Insert Material: Copper alloy/ Tin platedSpecification. Approvals: UL IEC . Dimension A: 54.9 mm . Dimension B: 60.4 mm . Insulation withstands voltage 2000 Vac/1 min . Voltage: 630 V . Colour: Grey . Amperage: 32 ampsCompatible Optocouplers. RE-0014， RE-0504， RE-0514， RE-0554， RE-0564， RE-2604， RE-2614 and RE-2674ApplicationsRS PRO jumper links are used with Optocouplers in a wide range of applications such as；. Communications equipment . Process automation . Machine controlsWhy would you choose RS PRO .RS PRO is our own brand range and brings you a wide range of high-quality， great value products offering you more choice. Trusted by engineers all over the world， every part of every RS PRO product has been rigorously tested against demanding industry standards and only given the RS PRO Seal of Approval if we’re confident of their exceptional quality， which means you can be confident too.

RS PRO 2 Pole Jumper LinkFrom RS PRO a high-quality jumper link designed for use with Optocouplers. This jumper link is male with a straight orientation， has two contact poles， 6.1mm pitch and a voltage rating of 1000 V.Also known as；. Side insert bridge . Short circuit platesFeatures and Benefits. Poles 2 . Operating Temperature -25℃ to 60℃ . Storage Temperature -40℃ to 70℃ . Insulating material PASpecification. Approvals: UL IEC . Dimension: 6.1mm x (P-1) +5.5 . Voltage: 1000 V . Colour: Grey . Amperage: 32 ampsCompatible Optocouplers. RE-0014， RE-0504， RE-0514， RE-0554， RE-0564， RE-2604， RE-2614 and RE-2674ApplicationsRS PRO jumper links are used with Optocouplers in a wide range of applications such as；. Communications equipment . Process automation . Machine controlsWhy would you choose RS PRO .RS PRO is our own brand range and brings you a wide range of high-quality， great value products offering you more choice. Trusted by engineers all over the world， every part of every RS PRO product has been rigorously tested against demanding industry standards and only given the RS PRO Seal of Approval if we’re confident of their exceptional quality， which means you can be confident too.

RS Pro 温度コントローラRS Pro PID 温度コントローラは、 J タイプ熱電対入力と 2 つのリレー SSR 出力を備えています。4 桁ディスプレイを備え、コントローラサイズは 96 x 96 mm です。230 V ac 電源電圧で動作します。特長と利点 動作温度範囲： 0 ° C ～ 50 ° C 熱電対( TC )： J 、( IEC 584.1 )( ITS90 )入力 制御出力：リレー( 5A @ 250VV (抵抗負荷時)) SSR ドライバ出力(最大 50mA 、最大 18VZ オン / オフまたは時間比例操作 湿度 :0 ～ 90% RH ( 結露しないこと ) 調整可能なセットオフセット値 オン / オフ制御用 DIP スイッチによる調整可能な制御時間 オン / オフ制御用 DIP スイッチによる可変ヒステリシス値認定 IP20 等級 - ユニット背面 IP65 等級 - ユニットの前面 CE認定

RS PRO General Purpose Enclosure， IP66 Introducing the range of RS PRO die cast aluminium General Purpose Enclosures， providing a secure enclosure， ideal for protecting electrical parts and components. These lightweight yet durable enclosures are made from die cast aluminium， providing shock-absorbent and scratch-resistant properties， ensuring ultimate protection for delicate and expensive equipment housed inside them. Each high-quality enclosure is quick and easy to install and can be mounted on flat surfaces in a variety of environments. This cost-effective RS PRO enclosure hermetically sealed for security， ensuring an IP66 protection rating， ideal for a wide range of applications and environments. Features and Benefits: These lightweight yet durable RS PRO EMC shielded enclosures offer an ideal protective solution for expensive and delicate electrical parts and components Made from high-quality die-cast aluminium with shock-absorbent and scratch-resistant properties， the enclosures provide protection from dust， moisture and any other debris that could potentially damage expensive and delicate equipment The smooth finish allows for easy cleaning and keeping the surface dust and debris free Each enclosure is quick and easy to install， saving time and valuable resource for more important tasks This range of RS PRO enclosure features an IP66 and IK09 rating， providing optimum protection for internal components and is also ATEX approved They are available in a range of different sizes to suit different specifications and come in a modern light grey colour， ideal for environments where neutral colours are preferred Supplied with lid and base， polyurethane seal， captive +/- stainless steel screws and 4 copper plated earthing screws Applications: General purpose enclosures are units that are designed to accommodate a wide variety of items for secure and safe storage. They are often used for the protection of electronics equipment and often are compliant to IP， fire resistance and corrosion-resistant， dependant on what is being stored and where it is being stored. These enclosures are such versatile units， they can be used for practically any storage application， they can be wall-mounted if needed and they can be made from a wide variety of materials like aluminium， ABS， fibreglass and much more. General purpose enclosures are often used for: Cable/Wire Management IT/Servers Solar Power Batteries Oil and Gas Production Food and Beverage Industry Telecommunication Industry What is Ingress Protection. An IP rating classifies the degrees of protection provided against the intrusion of solid objects (including body parts like hands and fingers)， dust， accidental contact and water in electrical enclosures. The first number indicates the protection from solids and the second number is the protection from liquids. Can the enclosure be used outside. This enclosure has an IP66 rating meaning it is protected against dust and water ingress， making it suitable for use outside. Why RS PRO. RS PRO is our own brand range and brings you a wide range of high-quality， great value products offering you more choice. Trusted by engineers all over the world， every part of every RS PRO product has been rigorously tested against demanding industry standards they’re only given the RS PRO seal of approval if we’re confident of their exceptional quality， which means you can be confident too.

RS PRO General Purpose Enclosure， IP66 Introducing the range of RS PRO die cast aluminium General Purpose Enclosures， providing a secure enclosure， ideal for protecting electrical parts and components. These lightweight yet durable enclosures are made from die cast aluminium， providing shock-absorbent and scratch-resistant properties， ensuring ultimate protection for delicate and expensive equipment housed inside them. Each high-quality enclosure is quick and easy to install and can be mounted on flat surfaces in a variety of environments. This cost-effective RS PRO enclosure hermetically sealed for security， ensuring an IP66 protection rating， ideal for a wide range of applications and environments. Features and Benefits: These lightweight yet durable RS PRO EMC shielded enclosures offer an ideal protective solution for expensive and delicate electrical parts and components Made from high-quality die-cast aluminium with shock-absorbent and scratch-resistant properties， the enclosures provide protection from dust， moisture and any other debris that could potentially damage expensive and delicate equipment The smooth finish allows for easy cleaning and keeping the surface dust and debris free Each enclosure is quick and easy to install， saving time and valuable resource for more important tasks This range of RS PRO enclosure features an IP66 and IK09 rating， providing optimum protection for internal components and is also ATEX approved They are available in a range of different sizes to suit different specifications and come in a modern light grey colour， ideal for environments where neutral colours are preferred Supplied with lid and base， polyurethane seal， captive +/- stainless steel screws and 4 copper plated earthing screws Applications: General purpose enclosures are units that are designed to accommodate a wide variety of items for secure and safe storage. They are often used for the protection of electronics equipment and often are compliant to IP， fire resistance and corrosion-resistant， dependant on what is being stored and where it is being stored. These enclosures are such versatile units， they can be used for practically any storage application， they can be wall-mounted if needed and they can be made from a wide variety of materials like aluminium， ABS， fibreglass and much more. General purpose enclosures are often used for: Cable/Wire Management IT/Servers Solar Power Batteries Oil and Gas Production Food and Beverage Industry Telecommunication Industry What is Ingress Protection. An IP rating classifies the degrees of protection provided against the intrusion of solid objects (including body parts like hands and fingers)， dust， accidental contact and water in electrical enclosures. The first number indicates the protection from solids and the second number is the protection from liquids. Can the enclosure be used outside. This enclosure has an IP66 rating meaning it is protected against dust and water ingress， making it suitable for use outside. Why RS PRO. RS PRO is our own brand range and brings you a wide range of high-quality， great value products offering you more choice. Trusted by engineers all over the world， every part of every RS PRO product has been rigorously tested against demanding industry standards they’re only given the RS PRO seal of approval if we’re confident of their exceptional quality， which means you can be confident too.

RS PRO General Purpose Enclosure， IP66 Introducing the range of RS PRO die cast aluminium General Purpose Enclosures， providing a secure enclosure， ideal for protecting electrical parts and components. These lightweight yet durable enclosures are made from die cast aluminium， providing shock-absorbent and scratch-resistant properties， ensuring ultimate protection for delicate and expensive equipment housed inside them. Each high-quality enclosure is quick and easy to install and can be mounted on flat surfaces in a variety of environments. This cost-effective RS PRO enclosure hermetically sealed for security， ensuring an IP66 protection rating， ideal for a wide range of applications and environments. Features and Benefits: These lightweight yet durable RS PRO EMC shielded enclosures offer an ideal protective solution for expensive and delicate electrical parts and components Made from high-quality die-cast aluminium with shock-absorbent and scratch-resistant properties， the enclosures provide protection from dust， moisture and any other debris that could potentially damage expensive and delicate equipment The smooth finish allows for easy cleaning and keeping the surface dust and debris free Each enclosure is quick and easy to install， saving time and valuable resource for more important tasks This range of RS PRO enclosure features an IP66 and IK09 rating， providing optimum protection for internal components and is also ATEX approved They are available in a range of different sizes to suit different specifications and come in a modern light grey colour， ideal for environments where neutral colours are preferred Supplied with lid and base， polyurethane seal， captive +/- stainless steel screws and 4 copper plated earthing screws Applications: General purpose enclosures are units that are designed to accommodate a wide variety of items for secure and safe storage. They are often used for the protection of electronics equipment and often are compliant to IP， fire resistance and corrosion-resistant， dependant on what is being stored and where it is being stored. These enclosures are such versatile units， they can be used for practically any storage application， they can be wall-mounted if needed and they can be made from a wide variety of materials like aluminium， ABS， fibreglass and much more. General purpose enclosures are often used for: Cable/Wire Management IT/Servers Solar Power Batteries Oil and Gas Production Food and Beverage Industry Telecommunication Industry What is Ingress Protection. An IP rating classifies the degrees of protection provided against the intrusion of solid objects (including body parts like hands and fingers)， dust， accidental contact and water in electrical enclosures. The first number indicates the protection from solids and the second number is the protection from liquids. Can the enclosure be used outside. This enclosure has an IP66 rating meaning it is protected against dust and water ingress， making it suitable for use outside. Why RS PRO. RS PRO is our own brand range and brings you a wide range of high-quality， great value products offering you more choice. Trusted by engineers all over the world， every part of every RS PRO product has been rigorously tested against demanding industry standards they’re only given the RS PRO seal of approval if we’re confident of their exceptional quality， which means you can be confident too.

RS PRO General Purpose Enclosure， IP66 Introducing the range of RS PRO die cast aluminium General Purpose Enclosures， providing a secure enclosure， ideal for protecting electrical parts and components. These lightweight yet durable enclosures are made from die cast aluminium， providing shock-absorbent and scratch-resistant properties， ensuring ultimate protection for delicate and expensive equipment housed inside them. Each high-quality enclosure is quick and easy to install and can be mounted on flat surfaces in a variety of environments. This cost-effective RS PRO enclosure hermetically sealed for security， ensuring an IP66 protection rating， ideal for a wide range of applications and environments. Features and Benefits: These lightweight yet durable RS PRO EMC shielded enclosures offer an ideal protective solution for expensive and delicate electrical parts and components Made from high-quality die-cast aluminium with shock-absorbent and scratch-resistant properties， the enclosures provide protection from dust， moisture and any other debris that could potentially damage expensive and delicate equipment The smooth finish allows for easy cleaning and keeping the surface dust and debris free Each enclosure is quick and easy to install， saving time and valuable resource for more important tasks This range of RS PRO enclosure features an IP66 and IK09 rating， providing optimum protection for internal components and is also ATEX approved They are available in a range of different sizes to suit different specifications and come in a modern light grey colour， ideal for environments where neutral colours are preferred Supplied with lid and base， polyurethane seal， captive +/- stainless steel screws and 4 copper plated earthing screws Applications: General purpose enclosures are units that are designed to accommodate a wide variety of items for secure and safe storage. They are often used for the protection of electronics equipment and often are compliant to IP， fire resistance and corrosion-resistant， dependant on what is being stored and where it is being stored. These enclosures are such versatile units， they can be used for practically any storage application， they can be wall-mounted if needed and they can be made from a wide variety of materials like aluminium， ABS， fibreglass and much more. General purpose enclosures are often used for: Cable/Wire Management IT/Servers Solar Power Batteries Oil and Gas Production Food and Beverage Industry Telecommunication Industry What is Ingress Protection. An IP rating classifies the degrees of protection provided against the intrusion of solid objects (including body parts like hands and fingers)， dust， accidental contact and water in electrical enclosures. The first number indicates the protection from solids and the second number is the protection from liquids. Can the enclosure be used outside. This enclosure has an IP66 rating meaning it is protected against dust and water ingress， making it suitable for use outside. Why RS PRO. RS PRO is our own brand range and brings you a wide range of high-quality， great value products offering you more choice. Trusted by engineers all over the world， every part of every RS PRO product has been rigorously tested against demanding industry standards they’re only given the RS PRO seal of approval if we’re confident of their exceptional quality， which means you can be confident too.

RS PRO General Purpose Enclosure， IP66 Introducing the range of RS PRO die cast aluminium General Purpose Enclosures， providing a secure enclosure， ideal for protecting electrical parts and components. These lightweight yet durable enclosures are made from die cast aluminium， providing shock-absorbent and scratch-resistant properties， ensuring ultimate protection for delicate and expensive equipment housed inside them. Each high-quality enclosure is quick and easy to install and can be mounted on flat surfaces in a variety of environments. This cost-effective RS PRO enclosure hermetically sealed for security， ensuring an IP66 protection rating， ideal for a wide range of applications and environments. Features and Benefits: These lightweight yet durable RS PRO EMC shielded enclosures offer an ideal protective solution for expensive and delicate electrical parts and components Made from high-quality die-cast aluminium with shock-absorbent and scratch-resistant properties， the enclosures provide protection from dust， moisture and any other debris that could potentially damage expensive and delicate equipment The smooth finish allows for easy cleaning and keeping the surface dust and debris free Each enclosure is quick and easy to install， saving time and valuable resource for more important tasks This range of RS PRO enclosure features an IP66 and IK09 rating， providing optimum protection for internal components and is also ATEX approved They are available in a range of different sizes to suit different specifications and come in a modern light grey colour， ideal for environments where neutral colours are preferred Supplied with lid and base， polyurethane seal， captive +/- stainless steel screws and 4 copper plated earthing screws Applications: General purpose enclosures are units that are designed to accommodate a wide variety of items for secure and safe storage. They are often used for the protection of electronics equipment and often are compliant to IP， fire resistance and corrosion-resistant， dependant on what is being stored and where it is being stored. These enclosures are such versatile units， they can be used for practically any storage application， they can be wall-mounted if needed and they can be made from a wide variety of materials like aluminium， ABS， fibreglass and much more. General purpose enclosures are often used for: Cable/Wire Management IT/Servers Solar Power Batteries Oil and Gas Production Food and Beverage Industry Telecommunication Industry What is Ingress Protection. An IP rating classifies the degrees of protection provided against the intrusion of solid objects (including body parts like hands and fingers)， dust， accidental contact and water in electrical enclosures. The first number indicates the protection from solids and the second number is the protection from liquids. Can the enclosure be used outside. This enclosure has an IP66 rating meaning it is protected against dust and water ingress， making it suitable for use outside. Why RS PRO. RS PRO is our own brand range and brings you a wide range of high-quality， great value products offering you more choice. Trusted by engineers all over the world， every part of every RS PRO product has been rigorously tested against demanding industry standards they’re only given the RS PRO seal of approval if we’re confident of their exceptional quality， which means you can be confident too.

RS PRO General Purpose Enclosure， IP66 Introducing the range of RS PRO die cast aluminium General Purpose Enclosures， providing a secure enclosure， ideal for protecting electrical parts and components. These lightweight yet durable enclosures are made from die cast aluminium， providing shock-absorbent and scratch-resistant properties， ensuring ultimate protection for delicate and expensive equipment housed inside them. Each high-quality enclosure is quick and easy to install and can be mounted on flat surfaces in a variety of environments. This cost-effective RS PRO enclosure hermetically sealed for security， ensuring an IP66 protection rating， ideal for a wide range of applications and environments. Features and Benefits: These lightweight yet durable RS PRO EMC shielded enclosures offer an ideal protective solution for expensive and delicate electrical parts and components Made from high-quality die-cast aluminium with shock-absorbent and scratch-resistant properties， the enclosures provide protection from dust， moisture and any other debris that could potentially damage expensive and delicate equipment The smooth finish allows for easy cleaning and keeping the surface dust and debris free Each enclosure is quick and easy to install， saving time and valuable resource for more important tasks This range of RS PRO enclosure features an IP66 and IK09 rating， providing optimum protection for internal components and is also ATEX approved They are available in a range of different sizes to suit different specifications and come in a modern light grey colour， ideal for environments where neutral colours are preferred Supplied with lid and base， polyurethane seal， captive +/- stainless steel screws and 4 copper plated earthing screws Applications: General purpose enclosures are units that are designed to accommodate a wide variety of items for secure and safe storage. They are often used for the protection of electronics equipment and often are compliant to IP， fire resistance and corrosion-resistant， dependant on what is being stored and where it is being stored. These enclosures are such versatile units， they can be used for practically any storage application， they can be wall-mounted if needed and they can be made from a wide variety of materials like aluminium， ABS， fibreglass and much more. General purpose enclosures are often used for: Cable/Wire Management IT/Servers Solar Power Batteries Oil and Gas Production Food and Beverage Industry Telecommunication Industry What is Ingress Protection. An IP rating classifies the degrees of protection provided against the intrusion of solid objects (including body parts like hands and fingers)， dust， accidental contact and water in electrical enclosures. The first number indicates the protection from solids and the second number is the protection from liquids. Can the enclosure be used outside. This enclosure has an IP66 rating meaning it is protected against dust and water ingress， making it suitable for use outside. Why RS PRO. RS PRO is our own brand range and brings you a wide range of high-quality， great value products offering you more choice. Trusted by engineers all over the world， every part of every RS PRO product has been rigorously tested against demanding industry standards they’re only given the RS PRO seal of approval if we’re confident of their exceptional quality， which means you can be confident too.

RS PRO General Purpose Enclosure， IP66 Introducing the range of RS PRO die cast aluminium General Purpose Enclosures， providing a secure enclosure， ideal for protecting electrical parts and components. These lightweight yet durable enclosures are made from die cast aluminium， providing shock-absorbent and scratch-resistant properties， ensuring ultimate protection for delicate and expensive equipment housed inside them. Each high-quality enclosure is quick and easy to install and can be mounted on flat surfaces in a variety of environments. This cost-effective RS PRO enclosure hermetically sealed for security， ensuring an IP66 protection rating， ideal for a wide range of applications and environments. Features and Benefits: These lightweight yet durable RS PRO EMC shielded enclosures offer an ideal protective solution for expensive and delicate electrical parts and components Made from high-quality die-cast aluminium with shock-absorbent and scratch-resistant properties， the enclosures provide protection from dust， moisture and any other debris that could potentially damage expensive and delicate equipment The smooth finish allows for easy cleaning and keeping the surface dust and debris free Each enclosure is quick and easy to install， saving time and valuable resource for more important tasks This range of RS PRO enclosure features an IP66 and IK09 rating， providing optimum protection for internal components and is also ATEX approved They are available in a range of different sizes to suit different specifications and come in a modern light grey colour， ideal for environments where neutral colours are preferred Supplied with lid and base， polyurethane seal， captive +/- stainless steel screws and 4 copper plated earthing screws Applications: General purpose enclosures are units that are designed to accommodate a wide variety of items for secure and safe storage. They are often used for the protection of electronics equipment and often are compliant to IP， fire resistance and corrosion-resistant， dependant on what is being stored and where it is being stored. These enclosures are such versatile units， they can be used for practically any storage application， they can be wall-mounted if needed and they can be made from a wide variety of materials like aluminium， ABS， fibreglass and much more. General purpose enclosures are often used for: Cable/Wire Management IT/Servers Solar Power Batteries Oil and Gas Production Food and Beverage Industry Telecommunication Industry What is Ingress Protection. An IP rating classifies the degrees of protection provided against the intrusion of solid objects (including body parts like hands and fingers)， dust， accidental contact and water in electrical enclosures. The first number indicates the protection from solids and the second number is the protection from liquids. Can the enclosure be used outside. This enclosure has an IP66 rating meaning it is protected against dust and water ingress， making it suitable for use outside. Why RS PRO. RS PRO is our own brand range and brings you a wide range of high-quality， great value products offering you more choice. Trusted by engineers all over the world， every part of every RS PRO product has been rigorously tested against demanding industry standards they’re only given the RS PRO seal of approval if we’re confident of their exceptional quality， which means you can be confident too.

RS PRO General Purpose Enclosure， IP66 Introducing the range of RS PRO die cast aluminium General Purpose Enclosures， providing a secure enclosure， ideal for protecting electrical parts and components. These lightweight yet durable enclosures are made from die cast aluminium， providing shock-absorbent and scratch-resistant properties， ensuring ultimate protection for delicate and expensive equipment housed inside them. Each high-quality enclosure is quick and easy to install and can be mounted on flat surfaces in a variety of environments. This cost-effective RS PRO enclosure hermetically sealed for security， ensuring an IP66 protection rating， ideal for a wide range of applications and environments. Features and Benefits: These lightweight yet durable RS PRO EMC shielded enclosures offer an ideal protective solution for expensive and delicate electrical parts and components Made from high-quality die-cast aluminium with shock-absorbent and scratch-resistant properties， the enclosures provide protection from dust， moisture and any other debris that could potentially damage expensive and delicate equipment The smooth finish allows for easy cleaning and keeping the surface dust and debris free Each enclosure is quick and easy to install， saving time and valuable resource for more important tasks This range of RS PRO enclosure features an IP66 and IK09 rating， providing optimum protection for internal components and is also ATEX approved They are available in a range of different sizes to suit different specifications and come in a modern light grey colour， ideal for environments where neutral colours are preferred Supplied with lid and base， polyurethane seal， captive +/- stainless steel screws and 4 copper plated earthing screws Applications: General purpose enclosures are units that are designed to accommodate a wide variety of items for secure and safe storage. They are often used for the protection of electronics equipment and often are compliant to IP， fire resistance and corrosion-resistant， dependant on what is being stored and where it is being stored. These enclosures are such versatile units， they can be used for practically any storage application， they can be wall-mounted if needed and they can be made from a wide variety of materials like aluminium， ABS， fibreglass and much more. General purpose enclosures are often used for: Cable/Wire Management IT/Servers Solar Power Batteries Oil and Gas Production Food and Beverage Industry Telecommunication Industry What is Ingress Protection. An IP rating classifies the degrees of protection provided against the intrusion of solid objects (including body parts like hands and fingers)， dust， accidental contact and water in electrical enclosures. The first number indicates the protection from solids and the second number is the protection from liquids. Can the enclosure be used outside. This enclosure has an IP66 rating meaning it is protected against dust and water ingress， making it suitable for use outside. Why RS PRO. RS PRO is our own brand range and brings you a wide range of high-quality， great value products offering you more choice. Trusted by engineers all over the world， every part of every RS PRO product has been rigorously tested against demanding industry standards they’re only given the RS PRO seal of approval if we’re confident of their exceptional quality， which means you can be confident too.

RS PRO General Purpose Enclosure， IP66 Introducing the range of RS PRO die cast aluminium General Purpose Enclosures， providing a secure enclosure， ideal for protecting electrical parts and components. These lightweight yet durable enclosures are made from die cast aluminium， providing shock-absorbent and scratch-resistant properties， ensuring ultimate protection for delicate and expensive equipment housed inside them. Each high-quality enclosure is quick and easy to install and can be mounted on flat surfaces in a variety of environments. This cost-effective RS PRO enclosure hermetically sealed for security， ensuring an IP66 protection rating， ideal for a wide range of applications and environments. Features and Benefits: These lightweight yet durable RS PRO EMC shielded enclosures offer an ideal protective solution for expensive and delicate electrical parts and components Made from high-quality die-cast aluminium with shock-absorbent and scratch-resistant properties， the enclosures provide protection from dust， moisture and any other debris that could potentially damage expensive and delicate equipment The smooth finish allows for easy cleaning and keeping the surface dust and debris free Each enclosure is quick and easy to install， saving time and valuable resource for more important tasks This range of RS PRO enclosure features an IP66 and IK09 rating， providing optimum protection for internal components and is also ATEX approved They are available in a range of different sizes to suit different specifications and come in a modern light grey colour， ideal for environments where neutral colours are preferred Supplied with lid and base， polyurethane seal， captive +/- stainless steel screws and 4 copper plated earthing screws Applications: General purpose enclosures are units that are designed to accommodate a wide variety of items for secure and safe storage. They are often used for the protection of electronics equipment and often are compliant to IP， fire resistance and corrosion-resistant， dependant on what is being stored and where it is being stored. These enclosures are such versatile units， they can be used for practically any storage application， they can be wall-mounted if needed and they can be made from a wide variety of materials like aluminium， ABS， fibreglass and much more. General purpose enclosures are often used for: Cable/Wire Management IT/Servers Solar Power Batteries Oil and Gas Production Food and Beverage Industry Telecommunication Industry What is Ingress Protection. An IP rating classifies the degrees of protection provided against the intrusion of solid objects (including body parts like hands and fingers)， dust， accidental contact and water in electrical enclosures. The first number indicates the protection from solids and the second number is the protection from liquids. Can the enclosure be used outside. This enclosure has an IP66 rating meaning it is protected against dust and water ingress， making it suitable for use outside. Why RS PRO. RS PRO is our own brand range and brings you a wide range of high-quality， great value products offering you more choice. Trusted by engineers all over the world， every part of every RS PRO product has been rigorously tested against demanding industry standards they’re only given the RS PRO seal of approval if we’re confident of their exceptional quality， which means you can be confident too.