「uni posca」の検索結果

ポスターカラーのように鮮やか発色。 重ね書きができます。 乾けば水に流れず耐水性にすぐれています。 にじみや裏うつりがしません。 水性ですから素材を侵すことがありません。 イヤなニオイもありません。 不透明インクなので、金属・ガラス・プラスチック等にも書けます。

ポスターカラーのように鮮やか発色。 乾けば水に流れず耐水性に優れています。 水性ですから素材を侵すことがありません。 イヤなニオイもありません。 重ね書きができます。 にじみや裏うつりがありません。 不透明インクなので、金属・ガラス・プラスチック等にも書けます。

ポスターカラーのように鮮やか発色。 乾けば水に流れず耐水性に優れています。 水性ですから素材を侵すことがありません。 イヤなニオイもありません。 重ね書きができます。 にじみや裏うつりがありません。 不透明インクなので、金属・ガラス・プラスチック等にも書けます。

ポスターカラーのように鮮やか発色。 重ね書きができます。 乾けば水に流れず耐水性にすぐれています。 にじみや裏うつりがしません。 水性ですから素材を侵すことがありません。 イヤなニオイもありません。 不透明インクなので、金属・ガラス・プラスチック等にも書けます。

ポスターカラーのように鮮やか発色。 乾けば水に流れず耐水性に優れています。 水性ですから素材を侵すことがありません。 イヤなニオイもありません。 重ね書きができます。 にじみや裏うつりがありません。 不透明インクなので、金属・ガラス・プラスチック等にも書けます。

ポスターカラーのような鮮やかな発色。文字・線・塗りなどに使える1.8～2.5mmの中字丸芯タイプ。 不透明インクなので、黒や濃色の上でも鮮やかに発色、重ね書きも可能。 ペン先の太さやインクの種類も豊富なので、多彩な用途に使うことができます。

ポスターカラーのような鮮やかな発色。手帳や写真で遊べる0.7mmの極細タイプ。 不透明インクなので、黒や濃色の上でも鮮やかに発色、重ね書きも可能。 ペン先の太さやインクの種類も豊富なので、多彩な用途に使うことができます。

市場にある従来のブラックボードマーカーは、こすれや水分に弱く、「お客様の服を汚してしまった」「せっかく書いたボードの文字が雨で流れてしまった」などの不満がありました。 「ブラックボードポスカ」は『ポスカ』の持つ耐水性、固着性を維持しており「こすれに強い」「水・雨に流れにくい」という特長を持っています。 ポスカの持つ「乾けば水に流れない」という特長が、ブラックボードへの使用の場合「水ぶきで消しにくい」と感じられていました。「ブラックボードポスカ」は従来より発売しております『ポスカ』のインク改良を行い、水ぶきで消せる性能を持たせました。

ポスターカラーのような鮮やかな発色。小さな文字や縁取り、細部書きに使える0.9～1.3mmの細字丸芯タイプ。不透明インクなので、黒や濃色の上でも鮮やかに発色、重ね書きも可能。ペン先の太さやインクの種類も豊富なので、多彩な用途に使うことができます。

ポスターカラーのような鮮やかな発色。文字・線・塗りなどに使える1.8～2.5mmの中字丸芯タイプ。不透明インクなので、黒や濃色の上でも鮮やかに発色、重ね書きも可能。ペン先の太さやインクの種類も豊富なので、多彩な用途に使うことができます。

市場にある従来のブラックボードマーカーは、こすれや水分に弱く、「お客様の服を汚してしまった」「せっかく書いたボードの文字が雨で流れてしまった」などの不満がありました。 「ブラックボードポスカ」は『ポスカ』の持つ耐水性、固着性を維持しており「こすれに強い」「水・雨に流れにくい」という特長を持っています。 ポスカの持つ「乾けば水に流れない」という特長が、ブラックボードへの使用の場合「水ぶきで消しにくい」と感じられていました。「ブラックボードポスカ」は従来より発売しております『ポスカ』のインク改良を行い、水ぶきで消せる性能を持たせました。

水性サインペン/細字/色画用紙等濃い色の上にも筆記可能

市場にある従来のブラックボードマーカーは、こすれや水分に弱く、「お客様の服を汚してしまった」「せっかく書いたボードの文字が雨で流れてしまった」などの不満がありました。 「ブラックボードポスカ」は『ポスカ』の持つ耐水性、固着性を維持しており「こすれに強い」「水・雨に流れにくい」という特長を持っています。 ポスカの持つ「乾けば水に流れない」という特長が、ブラックボードへの使用の場合「水ぶきで消しにくい」と感じられていました。「ブラックボードポスカ」は従来より発売しております『ポスカ』のインク改良を行い、水ぶきで消せる性能を持たせました。

ポスタカラーのような鮮やかな発色。 紙はもちろん写真やプラスチック、金属、ガラスにも書くことができ、重ね書きも可能です。

市場にある従来のブラックボードマーカーは、こすれや水分に弱く、「お客様の服を汚してしまった」「せっかく書いたボードの文字が雨で流れてしまった」などの不満がありました。 「ブラックボードポスカ」は『ポスカ』の持つ耐水性、固着性を維持しており「こすれに強い」「水・雨に流れにくい」という特長を持っています。 ポスカの持つ「乾けば水に流れない」という特長が、ブラックボードへの使用の場合「水ぶきで消しにくい」と感じられていました。「ブラックボードポスカ」は従来より発売しております『ポスカ』のインク改良を行い、水ぶきで消せる性能を持たせました。

衝撃から中身を守ります。 品番がZU-80→90→100→150→200→300と大きくなるにつれ、樹脂量が増し丈夫な素材となるので強度が増します。

イヤな臭いがしません。 紙に書いてもにじみが少なく裏うつりがしません。 鮮やかな発色の顔料インクを使用。耐水性・耐光性に優れています。 金属・ガラス・プラスチックにも書けます。水性なので素材を傷めません。

RS PRO General Purpose Enclosure， IP66 Introducing the range of RS PRO die cast aluminium General Purpose Enclosures， providing a secure enclosure， ideal for protecting electrical parts and components. These lightweight yet durable enclosures are made from die cast aluminium， providing shock-absorbent and scratch-resistant properties， ensuring ultimate protection for delicate and expensive equipment housed inside them. Each high-quality enclosure is quick and easy to install and can be mounted on flat surfaces in a variety of environments. This cost-effective RS PRO enclosure hermetically sealed for security， ensuring an IP66 protection rating， ideal for a wide range of applications and environments. Features and Benefits: These lightweight yet durable RS PRO EMC shielded enclosures offer an ideal protective solution for expensive and delicate electrical parts and components Made from high-quality die-cast aluminium with shock-absorbent and scratch-resistant properties， the enclosures provide protection from dust， moisture and any other debris that could potentially damage expensive and delicate equipment The smooth finish allows for easy cleaning and keeping the surface dust and debris free Each enclosure is quick and easy to install， saving time and valuable resource for more important tasks This range of RS PRO enclosure features an IP66 and IK09 rating， providing optimum protection for internal components and is also ATEX approved They are available in a range of different sizes to suit different specifications and come in a modern light grey colour， ideal for environments where neutral colours are preferred Supplied with lid and base， polyurethane seal， captive +/- stainless steel screws and 4 copper plated earthing screws Applications: General purpose enclosures are units that are designed to accommodate a wide variety of items for secure and safe storage. They are often used for the protection of electronics equipment and often are compliant to IP， fire resistance and corrosion-resistant， dependant on what is being stored and where it is being stored. These enclosures are such versatile units， they can be used for practically any storage application， they can be wall-mounted if needed and they can be made from a wide variety of materials like aluminium， ABS， fibreglass and much more. General purpose enclosures are often used for: Cable/Wire Management IT/Servers Solar Power Batteries Oil and Gas Production Food and Beverage Industry Telecommunication Industry What is Ingress Protection. An IP rating classifies the degrees of protection provided against the intrusion of solid objects (including body parts like hands and fingers)， dust， accidental contact and water in electrical enclosures. The first number indicates the protection from solids and the second number is the protection from liquids. Can the enclosure be used outside. This enclosure has an IP66 rating meaning it is protected against dust and water ingress， making it suitable for use outside. Why RS PRO. RS PRO is our own brand range and brings you a wide range of high-quality， great value products offering you more choice. Trusted by engineers all over the world， every part of every RS PRO product has been rigorously tested against demanding industry standards they’re only given the RS PRO seal of approval if we’re confident of their exceptional quality， which means you can be confident too.

水性サインペン/中字/色画用紙等濃い色の上にも筆記可能

RS PRO General Purpose Enclosure， IP66 Introducing the range of RS PRO die cast aluminium General Purpose Enclosures， providing a secure enclosure， ideal for protecting electrical parts and components. These lightweight yet durable enclosures are made from die cast aluminium， providing shock-absorbent and scratch-resistant properties， ensuring ultimate protection for delicate and expensive equipment housed inside them. Each high-quality enclosure is quick and easy to install and can be mounted on flat surfaces in a variety of environments. This cost-effective RS PRO enclosure hermetically sealed for security， ensuring an IP66 protection rating， ideal for a wide range of applications and environments. Features and Benefits: These lightweight yet durable RS PRO EMC shielded enclosures offer an ideal protective solution for expensive and delicate electrical parts and components Made from high-quality die-cast aluminium with shock-absorbent and scratch-resistant properties， the enclosures provide protection from dust， moisture and any other debris that could potentially damage expensive and delicate equipment The smooth finish allows for easy cleaning and keeping the surface dust and debris free Each enclosure is quick and easy to install， saving time and valuable resource for more important tasks This range of RS PRO enclosure features an IP66 and IK09 rating， providing optimum protection for internal components and is also ATEX approved They are available in a range of different sizes to suit different specifications and come in a modern light grey colour， ideal for environments where neutral colours are preferred Supplied with lid and base， polyurethane seal， captive +/- stainless steel screws and 4 copper plated earthing screws Applications: General purpose enclosures are units that are designed to accommodate a wide variety of items for secure and safe storage. They are often used for the protection of electronics equipment and often are compliant to IP， fire resistance and corrosion-resistant， dependant on what is being stored and where it is being stored. These enclosures are such versatile units， they can be used for practically any storage application， they can be wall-mounted if needed and they can be made from a wide variety of materials like aluminium， ABS， fibreglass and much more. General purpose enclosures are often used for: Cable/Wire Management IT/Servers Solar Power Batteries Oil and Gas Production Food and Beverage Industry Telecommunication Industry What is Ingress Protection. An IP rating classifies the degrees of protection provided against the intrusion of solid objects (including body parts like hands and fingers)， dust， accidental contact and water in electrical enclosures. The first number indicates the protection from solids and the second number is the protection from liquids. Can the enclosure be used outside. This enclosure has an IP66 rating meaning it is protected against dust and water ingress， making it suitable for use outside. Why RS PRO. RS PRO is our own brand range and brings you a wide range of high-quality， great value products offering you more choice. Trusted by engineers all over the world， every part of every RS PRO product has been rigorously tested against demanding industry standards they’re only given the RS PRO seal of approval if we’re confident of their exceptional quality， which means you can be confident too.

RS PRO General Purpose Enclosure， IP66 Introducing the range of RS PRO die cast aluminium General Purpose Enclosures， providing a secure enclosure， ideal for protecting electrical parts and components. These lightweight yet durable enclosures are made from die cast aluminium， providing shock-absorbent and scratch-resistant properties， ensuring ultimate protection for delicate and expensive equipment housed inside them. Each high-quality enclosure is quick and easy to install and can be mounted on flat surfaces in a variety of environments. This cost-effective RS PRO enclosure hermetically sealed for security， ensuring an IP66 protection rating， ideal for a wide range of applications and environments. Features and Benefits: These lightweight yet durable RS PRO EMC shielded enclosures offer an ideal protective solution for expensive and delicate electrical parts and components Made from high-quality die-cast aluminium with shock-absorbent and scratch-resistant properties， the enclosures provide protection from dust， moisture and any other debris that could potentially damage expensive and delicate equipment The smooth finish allows for easy cleaning and keeping the surface dust and debris free Each enclosure is quick and easy to install， saving time and valuable resource for more important tasks This range of RS PRO enclosure features an IP66 and IK09 rating， providing optimum protection for internal components and is also ATEX approved They are available in a range of different sizes to suit different specifications and come in a modern light grey colour， ideal for environments where neutral colours are preferred Supplied with lid and base， polyurethane seal， captive +/- stainless steel screws and 4 copper plated earthing screws Applications: General purpose enclosures are units that are designed to accommodate a wide variety of items for secure and safe storage. They are often used for the protection of electronics equipment and often are compliant to IP， fire resistance and corrosion-resistant， dependant on what is being stored and where it is being stored. These enclosures are such versatile units， they can be used for practically any storage application， they can be wall-mounted if needed and they can be made from a wide variety of materials like aluminium， ABS， fibreglass and much more. General purpose enclosures are often used for: Cable/Wire Management IT/Servers Solar Power Batteries Oil and Gas Production Food and Beverage Industry Telecommunication Industry What is Ingress Protection. An IP rating classifies the degrees of protection provided against the intrusion of solid objects (including body parts like hands and fingers)， dust， accidental contact and water in electrical enclosures. The first number indicates the protection from solids and the second number is the protection from liquids. Can the enclosure be used outside. This enclosure has an IP66 rating meaning it is protected against dust and water ingress， making it suitable for use outside. Why RS PRO. RS PRO is our own brand range and brings you a wide range of high-quality， great value products offering you more choice. Trusted by engineers all over the world， every part of every RS PRO product has been rigorously tested against demanding industry standards they’re only given the RS PRO seal of approval if we’re confident of their exceptional quality， which means you can be confident too.

RS PRO General Purpose Enclosure， IP66 Introducing the range of RS PRO die cast aluminium General Purpose Enclosures， providing a secure enclosure， ideal for protecting electrical parts and components. These lightweight yet durable enclosures are made from die cast aluminium， providing shock-absorbent and scratch-resistant properties， ensuring ultimate protection for delicate and expensive equipment housed inside them. Each high-quality enclosure is quick and easy to install and can be mounted on flat surfaces in a variety of environments. This cost-effective RS PRO enclosure hermetically sealed for security， ensuring an IP66 protection rating， ideal for a wide range of applications and environments. Features and Benefits: These lightweight yet durable RS PRO EMC shielded enclosures offer an ideal protective solution for expensive and delicate electrical parts and components Made from high-quality die-cast aluminium with shock-absorbent and scratch-resistant properties， the enclosures provide protection from dust， moisture and any other debris that could potentially damage expensive and delicate equipment The smooth finish allows for easy cleaning and keeping the surface dust and debris free Each enclosure is quick and easy to install， saving time and valuable resource for more important tasks This range of RS PRO enclosure features an IP66 and IK09 rating， providing optimum protection for internal components and is also ATEX approved They are available in a range of different sizes to suit different specifications and come in a modern light grey colour， ideal for environments where neutral colours are preferred Supplied with lid and base， polyurethane seal， captive +/- stainless steel screws and 4 copper plated earthing screws Applications: General purpose enclosures are units that are designed to accommodate a wide variety of items for secure and safe storage. They are often used for the protection of electronics equipment and often are compliant to IP， fire resistance and corrosion-resistant， dependant on what is being stored and where it is being stored. These enclosures are such versatile units， they can be used for practically any storage application， they can be wall-mounted if needed and they can be made from a wide variety of materials like aluminium， ABS， fibreglass and much more. General purpose enclosures are often used for: Cable/Wire Management IT/Servers Solar Power Batteries Oil and Gas Production Food and Beverage Industry Telecommunication Industry What is Ingress Protection. An IP rating classifies the degrees of protection provided against the intrusion of solid objects (including body parts like hands and fingers)， dust， accidental contact and water in electrical enclosures. The first number indicates the protection from solids and the second number is the protection from liquids. Can the enclosure be used outside. This enclosure has an IP66 rating meaning it is protected against dust and water ingress， making it suitable for use outside. Why RS PRO. RS PRO is our own brand range and brings you a wide range of high-quality， great value products offering you more choice. Trusted by engineers all over the world， every part of every RS PRO product has been rigorously tested against demanding industry standards they’re only given the RS PRO seal of approval if we’re confident of their exceptional quality， which means you can be confident too.

RS PRO General Purpose Enclosure， IP66 Introducing the range of RS PRO die cast aluminium General Purpose Enclosures， providing a secure enclosure， ideal for protecting electrical parts and components. These lightweight yet durable enclosures are made from die cast aluminium， providing shock-absorbent and scratch-resistant properties， ensuring ultimate protection for delicate and expensive equipment housed inside them. Each high-quality enclosure is quick and easy to install and can be mounted on flat surfaces in a variety of environments. This cost-effective RS PRO enclosure hermetically sealed for security， ensuring an IP66 protection rating， ideal for a wide range of applications and environments. Features and Benefits: These lightweight yet durable RS PRO EMC shielded enclosures offer an ideal protective solution for expensive and delicate electrical parts and components Made from high-quality die-cast aluminium with shock-absorbent and scratch-resistant properties， the enclosures provide protection from dust， moisture and any other debris that could potentially damage expensive and delicate equipment The smooth finish allows for easy cleaning and keeping the surface dust and debris free Each enclosure is quick and easy to install， saving time and valuable resource for more important tasks This range of RS PRO enclosure features an IP66 and IK09 rating， providing optimum protection for internal components and is also ATEX approved They are available in a range of different sizes to suit different specifications and come in a modern light grey colour， ideal for environments where neutral colours are preferred Supplied with lid and base， polyurethane seal， captive +/- stainless steel screws and 4 copper plated earthing screws Applications: General purpose enclosures are units that are designed to accommodate a wide variety of items for secure and safe storage. They are often used for the protection of electronics equipment and often are compliant to IP， fire resistance and corrosion-resistant， dependant on what is being stored and where it is being stored. These enclosures are such versatile units， they can be used for practically any storage application， they can be wall-mounted if needed and they can be made from a wide variety of materials like aluminium， ABS， fibreglass and much more. General purpose enclosures are often used for: Cable/Wire Management IT/Servers Solar Power Batteries Oil and Gas Production Food and Beverage Industry Telecommunication Industry What is Ingress Protection. An IP rating classifies the degrees of protection provided against the intrusion of solid objects (including body parts like hands and fingers)， dust， accidental contact and water in electrical enclosures. The first number indicates the protection from solids and the second number is the protection from liquids. Can the enclosure be used outside. This enclosure has an IP66 rating meaning it is protected against dust and water ingress， making it suitable for use outside. Why RS PRO. RS PRO is our own brand range and brings you a wide range of high-quality， great value products offering you more choice. Trusted by engineers all over the world， every part of every RS PRO product has been rigorously tested against demanding industry standards they’re only given the RS PRO seal of approval if we’re confident of their exceptional quality， which means you can be confident too.

RS PRO General Purpose Enclosure， IP66 Introducing the range of RS PRO die cast aluminium General Purpose Enclosures， providing a secure enclosure， ideal for protecting electrical parts and components. These lightweight yet durable enclosures are made from die cast aluminium， providing shock-absorbent and scratch-resistant properties， ensuring ultimate protection for delicate and expensive equipment housed inside them. Each high-quality enclosure is quick and easy to install and can be mounted on flat surfaces in a variety of environments. This cost-effective RS PRO enclosure hermetically sealed for security， ensuring an IP66 protection rating， ideal for a wide range of applications and environments. Features and Benefits: These lightweight yet durable RS PRO EMC shielded enclosures offer an ideal protective solution for expensive and delicate electrical parts and components Made from high-quality die-cast aluminium with shock-absorbent and scratch-resistant properties， the enclosures provide protection from dust， moisture and any other debris that could potentially damage expensive and delicate equipment The smooth finish allows for easy cleaning and keeping the surface dust and debris free Each enclosure is quick and easy to install， saving time and valuable resource for more important tasks This range of RS PRO enclosure features an IP66 and IK09 rating， providing optimum protection for internal components and is also ATEX approved They are available in a range of different sizes to suit different specifications and come in a modern light grey colour， ideal for environments where neutral colours are preferred Supplied with lid and base， polyurethane seal， captive +/- stainless steel screws and 4 copper plated earthing screws Applications: General purpose enclosures are units that are designed to accommodate a wide variety of items for secure and safe storage. They are often used for the protection of electronics equipment and often are compliant to IP， fire resistance and corrosion-resistant， dependant on what is being stored and where it is being stored. These enclosures are such versatile units， they can be used for practically any storage application， they can be wall-mounted if needed and they can be made from a wide variety of materials like aluminium， ABS， fibreglass and much more. General purpose enclosures are often used for: Cable/Wire Management IT/Servers Solar Power Batteries Oil and Gas Production Food and Beverage Industry Telecommunication Industry What is Ingress Protection. An IP rating classifies the degrees of protection provided against the intrusion of solid objects (including body parts like hands and fingers)， dust， accidental contact and water in electrical enclosures. The first number indicates the protection from solids and the second number is the protection from liquids. Can the enclosure be used outside. This enclosure has an IP66 rating meaning it is protected against dust and water ingress， making it suitable for use outside. Why RS PRO. RS PRO is our own brand range and brings you a wide range of high-quality， great value products offering you more choice. Trusted by engineers all over the world， every part of every RS PRO product has been rigorously tested against demanding industry standards they’re only given the RS PRO seal of approval if we’re confident of their exceptional quality， which means you can be confident too.

RS PRO General Purpose Enclosure， IP66 Introducing the range of RS PRO die cast aluminium General Purpose Enclosures， providing a secure enclosure， ideal for protecting electrical parts and components. These lightweight yet durable enclosures are made from die cast aluminium， providing shock-absorbent and scratch-resistant properties， ensuring ultimate protection for delicate and expensive equipment housed inside them. Each high-quality enclosure is quick and easy to install and can be mounted on flat surfaces in a variety of environments. This cost-effective RS PRO enclosure hermetically sealed for security， ensuring an IP66 protection rating， ideal for a wide range of applications and environments. Features and Benefits: These lightweight yet durable RS PRO EMC shielded enclosures offer an ideal protective solution for expensive and delicate electrical parts and components Made from high-quality die-cast aluminium with shock-absorbent and scratch-resistant properties， the enclosures provide protection from dust， moisture and any other debris that could potentially damage expensive and delicate equipment The smooth finish allows for easy cleaning and keeping the surface dust and debris free Each enclosure is quick and easy to install， saving time and valuable resource for more important tasks This range of RS PRO enclosure features an IP66 and IK09 rating， providing optimum protection for internal components and is also ATEX approved They are available in a range of different sizes to suit different specifications and come in a modern light grey colour， ideal for environments where neutral colours are preferred Supplied with lid and base， polyurethane seal， captive +/- stainless steel screws and 4 copper plated earthing screws Applications: General purpose enclosures are units that are designed to accommodate a wide variety of items for secure and safe storage. They are often used for the protection of electronics equipment and often are compliant to IP， fire resistance and corrosion-resistant， dependant on what is being stored and where it is being stored. These enclosures are such versatile units， they can be used for practically any storage application， they can be wall-mounted if needed and they can be made from a wide variety of materials like aluminium， ABS， fibreglass and much more. General purpose enclosures are often used for: Cable/Wire Management IT/Servers Solar Power Batteries Oil and Gas Production Food and Beverage Industry Telecommunication Industry What is Ingress Protection. An IP rating classifies the degrees of protection provided against the intrusion of solid objects (including body parts like hands and fingers)， dust， accidental contact and water in electrical enclosures. The first number indicates the protection from solids and the second number is the protection from liquids. Can the enclosure be used outside. This enclosure has an IP66 rating meaning it is protected against dust and water ingress， making it suitable for use outside. Why RS PRO. RS PRO is our own brand range and brings you a wide range of high-quality， great value products offering you more choice. Trusted by engineers all over the world， every part of every RS PRO product has been rigorously tested against demanding industry standards they’re only given the RS PRO seal of approval if we’re confident of their exceptional quality， which means you can be confident too.

RS PRO General Purpose Enclosure， IP66 Introducing the range of RS PRO die cast aluminium General Purpose Enclosures， providing a secure enclosure， ideal for protecting electrical parts and components. These lightweight yet durable enclosures are made from die cast aluminium， providing shock-absorbent and scratch-resistant properties， ensuring ultimate protection for delicate and expensive equipment housed inside them. Each high-quality enclosure is quick and easy to install and can be mounted on flat surfaces in a variety of environments. This cost-effective RS PRO enclosure hermetically sealed for security， ensuring an IP66 protection rating， ideal for a wide range of applications and environments. Features and Benefits: These lightweight yet durable RS PRO EMC shielded enclosures offer an ideal protective solution for expensive and delicate electrical parts and components Made from high-quality die-cast aluminium with shock-absorbent and scratch-resistant properties， the enclosures provide protection from dust， moisture and any other debris that could potentially damage expensive and delicate equipment The smooth finish allows for easy cleaning and keeping the surface dust and debris free Each enclosure is quick and easy to install， saving time and valuable resource for more important tasks This range of RS PRO enclosure features an IP66 and IK09 rating， providing optimum protection for internal components and is also ATEX approved They are available in a range of different sizes to suit different specifications and come in a modern light grey colour， ideal for environments where neutral colours are preferred Supplied with lid and base， polyurethane seal， captive +/- stainless steel screws and 4 copper plated earthing screws Applications: General purpose enclosures are units that are designed to accommodate a wide variety of items for secure and safe storage. They are often used for the protection of electronics equipment and often are compliant to IP， fire resistance and corrosion-resistant， dependant on what is being stored and where it is being stored. These enclosures are such versatile units， they can be used for practically any storage application， they can be wall-mounted if needed and they can be made from a wide variety of materials like aluminium， ABS， fibreglass and much more. General purpose enclosures are often used for: Cable/Wire Management IT/Servers Solar Power Batteries Oil and Gas Production Food and Beverage Industry Telecommunication Industry What is Ingress Protection. An IP rating classifies the degrees of protection provided against the intrusion of solid objects (including body parts like hands and fingers)， dust， accidental contact and water in electrical enclosures. The first number indicates the protection from solids and the second number is the protection from liquids. Can the enclosure be used outside. This enclosure has an IP66 rating meaning it is protected against dust and water ingress， making it suitable for use outside. Why RS PRO. RS PRO is our own brand range and brings you a wide range of high-quality， great value products offering you more choice. Trusted by engineers all over the world， every part of every RS PRO product has been rigorously tested against demanding industry standards they’re only given the RS PRO seal of approval if we’re confident of their exceptional quality， which means you can be confident too.

DescriptionGet with the times， already! This SparkFun Real Time Clock(RTC)Module is a Qwiic-enabled breakout board for the RV-1805 chipset. The RTC is ultra-low power(running at only about 22nA in its lowest power setting)so it can use a supercapacitor for backup power instead of a normal battery. This means you get plenty of charge and discharge cycles without any degradation to the "battery." To make it even easier to get your readings， all communication is enacted exclusively via I2C， utilizing our handy Qwiic system so no soldering is required to connect it to the rest of your system. However， we still have broken out 0.1"-spaced pins in case you prefer to use a breadboard.This RTC module's built in RV-1805 has not one， but two internal oscillators：a 32.768kHz tuning fork crystal and a low power RC based oscillator and can automatically switch between the two using the more precise crystal to correct the RC oscillator every few minutes. This feature allows the module to maintain a very accurate date and time with the worst case being +/- about three minutes over a year. The RV-1805 also has a built in trickle charger so as soon as the RTC is connected to power the it will be fully charged in under 10 minutes and has the ability to switch power to other systems allowing it to directly turn on or off a power hungry device such as a microcontroller or RF engine.There is also the option to add a battery to the board if the supercapacitor just isn't going keep your project powered long enough(keep in mind， the supercap can hypothetically make the board keep time for around 35 days)， you can solder on an external battery. That means you can let board sit with no power or connection to the outside world and the current hour/minute/second/date will be maintained.Note：The I2C address of the RV-1805 is 0x69 and is hardware defined. A multiplexer/Mux is required to communicate to multiple RV-1805 sensors on a single bus. If you need to use more than one RV-1805 sensor consider using the Qwiic Mux Breakout.The SparkFun Qwiic connect system is an ecosystem of I2C sensors， actuators， shields and cables that make prototyping faster and less prone to error. All Qwiic-enabled boards use a common 1mm pitch， 4-pin JST connector. This reduces the amount of required PCB space， and polarized connections mean you can't hook it up wrong.Get Started with the RV-1805 Real Time Clock Module GuideFeaturesOperating Voltage(Startup)：1.6V - 3.6VOperating Voltage(Timekeeping)：1.5V - 3.6VOperating Temperature：-40℃ - 85℃Time Accuracy：±2.0 ppmCurrent Consumption：22nA(Typ.)I2C Address：0xD2Supercapacitor for Backup Power2x Internal Oscillators2x Qwiic Connectors

DescriptionThe SparkFun 2D Barcode Scanner Breakout is a nifty little breakout board featuring the DE2120 barcode scanner module from DYScan. The DE2120 reads 20 different barcode symbologies(both 1D and 2D)using a camera coupled with on-board image processing to identify and decode everything from UPC codes to QR codes. The module also features two LEDs：one for illumination and one to project the red line that you're used to seeing from laser-based scanners.This breakout board makes it easy to explore all of the capabilities of the DE2120 without dealing with finicky flat flex cables. The scanner's USB interface is exposed via the on-board USB-C connector. A buzzer and status LED are connected to the module through appropriate drive circuits and a push button tactile switch is provided on the "trigger" pin. When you're ready to incorporate the module into your embedded project， you can leverage the 5 pin header for direct access to the TTL serial pins， power pins， and trigger input.The module can be configured either by using the serial interface or by scanning command barcodes found in the Settings Manual.All keyboard， HID， and serial can be transmitted over the single USB-C connector. The DE2120 has the unique ability to enumerate all three protocols including a CDC serial driver so the device appears as a standard COM port.Get Started with the 2D Barcode Scanner Breakout Hookup GuideFeaturesUSB-C Connector for USB HID Interface and Virtual COM portReads 20 different symbologies1D SymbologiesUPC-AUPC-EEAN-8EAN-13Code 128GS1-128Code 39Code 93Code 11Interleaved 2-of-5Matrix 2-of-5Industrial 2-of-5CodabarMSIGS1 DataBarDatalogic 2-of-52D SymbologiesQR CodeData MatrixPDF 417Micro PDF 417Aztec Code

DescriptionYour 5V system can wield great power with this big， beefy relay board. How does 10A on the NC contacts and 20A on the NO contacts at 220VAC sound? The SparkFun Beefcake Relay Control Kit contains all the parts you need to get your high-power load under control. Only minimal assembly is required!The heart of the board is sealed， SPDT 20A/10A Relay. The relay is controlled by 5V logic through transistor， and an LED tells you when the relay is closed. This is kit， so it comes as through-hole parts with assembly required， which makes for some nice soldering practice. Screw terminal connectors on either side of the board make it easy to incorporate into your project.There are some pretty beefy traces connecting the relay to the load pins， but the 3-pin terminals are only rated for 15A max! If you plan on connecting larger load， you'll need to solder directly to the board. As always with high current and voltage， play it safe and use your judgment when deciding how much of load you want to put on board -- in open airflow the PCB can handle the full 20A for few minutes at time， but in an enclosed area heat can build up.Note：Please keep in mind that this board is really meant for someone with experience and good knowledge of electricity. If you're uncomfortable soldering or dealing with high voltage， please check out the IoT Power Relay. The IoT Power Relay is fully enclosed， making it lot safer.Get Started With the Beefcake Hookup Assembly GuideFeaturesVoltage Rating：220VAC/28VDCVCC requirements：4-6V， 150mA capableSPDT pins exposed(Form C)14 AWG screw terminals for relay connections.10 AWG solder lugs for relay connections.Flyback diode includedZener recovery diode included(decreases turn-off time)Heavy oz. copper on PCB