「serow」の検索結果

RS PRO Stainless-Steel Shackle We are proudly introducing our own branded RS PRO Stainless-Steel Shackle recognisable as they are narrower than Bow Shackle and， in most cases， they have threaded pin or pin close. The purpose of their existence is to serve for an in-line load， which explains why the loop is so small. The material of this D-Shackle is stainless-steel meaning it can be subjected to climatic factors. This D-Shackle (known as Chain Shackle) with mm diameter， withstands of approximately 150 kg is perfect solution to secure your light to moderate loads. Note: Suitable for wide variety of applications such as tensioning wires or securing loads. Not suitable for lifting applications. Features and Benefits Stainless-Steel Shackle with crew pin The Shackle comes with 3-year Warranty Pin diameter of mm Jaw width of 16 mm This Chain Shackle deals well with weather conditions Ideal for securing light to moderate loads or plant Suitable applications such as tensioning wires or securing loads Application Shackles are used in conjunction with slings and rope Wire Rope Slings Industrial crane rigging onboard large ships Commonly used in personal safety gear including climbing and mountaineering harnesses Vehicle recovery Frequently asked questions What are the widely accepted codes of practice when dealing with Shackles Always perform regular check inspection Pay attention to the manufacturer or distributor specifications Use the correct size of the Shackle for the hook or sling straps Make sure to connect multiple sling legs to the body of the Shackle， and never to the pin itself Never use the Shackle to lift if it does not meet the required safety standards or shows signs of excessive wear Why RS PRO RS Pro is our family brand and brings you wide range of high-quality and high-value products to support your project. Trusted by engineers all over the world， every part of every RS PRO product is always rigorously tested against demanding industry standards. We are only giving the RS PRO seal of approval if were confident of their exceptional quality， which means you can be convinced too.

The RS Pro Roller element is a component for roller tracks.Colour Yellow Axis preassembled

The RS Pro EPDM sponge cord often utilized for draft exclusion of windows， doors and floorboards. It can be compressed by almost 90% of its original profile. These flexible properties allow this cord to be compressed into floorboard and gaps much smaller than its original form by stretching it during the installation process.Low and high temperature capability is good Excellent resistance to weathering and ozone， water and steam Good performance in castor and some phosphate ester-based fluids

The RS Pro Roller element is a component for roller tracks.Colour Yellow Axis preassembled

RS PRO Wood 165mm Cutting Length TCT Circular Saw Blade with 16 Teeth. Introducing the RS PRO Circular 165mm cutting length saw blade designed for wood. What is TCT. Tungsten carbide-tipped is a material made with an alloy steel body and tungsten carbide inserts brazed to the tips of the teeth. TCT allows the user to maintain a steady rotatation while reducing the saw blade’s speed. The following items can be used with TCT saw blade: Wood Some ferrous metals Non-ferrous metals PlasticsRS Pro TCT 丸鋸ブレード( 16 歯)です。ブレード径： 165 mm ブレードの厚さ： 1.4 mm アーバー径： 20 mm 歯数 16 タングステンカーバイド製の先端部付きの軟鋼製ベースブレードです パック 1 の番号 木材の切削に適した切削材 Things to consider: Always use personal protective equipment to ensure safety for you and others. RS PRO offers a comprehensive range of PPE products to suit your needs. Browse our range to make a considered purchase.

RS PRO TCT Circular 136mm Cutting Length Saw Blade Introducing the RS PRO Circular 136mm cutting length saw blade designed for cutting metal， such as piping and rails. Features and Benefits Superior cutting performanceClean， precise cuts What is TCT. Tungsten carbide-tipped is a material made with an alloy steel body and tungsten carbide inserts brazed to the tips of the teeth. TCT allows the user to maintain a steady rotatation while reducing the saw blade’s speed. The following items can be used with TCT saw blade: Wood Some ferrous metals Non-ferrous metals PlasticsRS Pro TCT 丸鋸ブレード( 30 歯)です。ブレード径は 136mm です ブレードの厚さ： 1.4 mm アーバー径： 20 mm 歯数 30 タングステンカーバイド製の先端部付きの軟鋼製ベースブレードです パック 1 の番号 軟鋼に適した切削材料 Things to consider Always use personal protective equipment to ensure safety for you and others. RS PRO offers a comprehensive range of PPE products to suit your needs. Browse our range to make a considered purchase.

黄銅ゲートバルブ. This RS PRO gate valve gives you total control over the start and stop of your water flow. It stops liquid from flowing into a section of your pipeline， letting you isolate parts of the pipes for cleaning or maintenance without the need to redirect the water. Its non-rising stem means it doesn't move down or up as the valve is turned to close or open. This fixed position makes it more compact than rising stem valves， so it's a good choice for areas that have limited space， like underground piping networks. This kind of gate valve is commonly used in offshore applications， power plants and water treatment facilities. It's suitable for controlling water in high-pressure systems thanks to its maximum working pressure of 20 bar. Features and Benefits. 高品質の潤滑を施したパッキング ノンライジング式ステム 圧力下で再パッキング可能 黄銅ソリッドウェッジ BSIカイトマーク取得済み: ライセンス番号KM-06045 グラビティダイキャストによる黄銅ボディ: 品番 ； 261-0340 261-0340 及び ； 261-0356 261-0356. Applications. These RS PRO brass gates valves are seen is many versatile applications including the oil and gas industry， manufacturing and automotive， examples include: Power plants Water treatment Mining and Offshore applications. Why RS PRO.. RS PRO is our own brand range and brings you a wide range of high-quality， great value products offering you more choice. Trusted by engineers all over the world， every part of every RS PRO product has been rigorously tested against demanding industry standards they ’re only given the RS PRO seal of approval if we ’re confident of their exceptional quality， which means you can be confident too. Approvals. BSI Kitemark License No. KM 06045. Standards. BS5154 - PN20； BS21

黄銅ゲートバルブ. This RS PRO gate valve gives you total control over the start and stop of your water flow. It stops liquid from flowing into a section of your pipeline， letting you isolate parts of the pipes for cleaning or maintenance without the need to redirect the water. Its non-rising stem means it doesn't move down or up as the valve is turned to close or open. This fixed position makes it more compact than rising stem valves， so it's a good choice for areas that have limited space， like underground piping networks. This kind of gate valve is commonly used in offshore applications， power plants and water treatment facilities. It's suitable for controlling water in high-pressure systems thanks to its maximum working pressure of 20 bar. Features and Benefits. 高品質の潤滑を施したパッキング ノンライジング式ステム 圧力下で再パッキング可能 黄銅ソリッドウェッジ BSIカイトマーク取得済み: ライセンス番号KM-06045 グラビティダイキャストによる黄銅ボディ: 品番 ； 261-0340 261-0340 及び ； 261-0356 261-0356. Applications. These RS PRO brass gates valves are seen is many versatile applications including the oil and gas industry， manufacturing and automotive， examples include: Power plants Water treatment Mining and Offshore applications. Why RS PRO.. RS PRO is our own brand range and brings you a wide range of high-quality， great value products offering you more choice. Trusted by engineers all over the world， every part of every RS PRO product has been rigorously tested against demanding industry standards they ’re only given the RS PRO seal of approval if we ’re confident of their exceptional quality， which means you can be confident too. Approvals. BSI Kitemark License No. KM 06045. Standards. BS5154 - PN20； BS21

黄銅ゲートバルブ. This RS PRO gate valve gives you total control over the start and stop of your water flow. It stops liquid from flowing into a section of your pipeline， letting you isolate parts of the pipes for cleaning or maintenance without the need to redirect the water. Its non-rising stem means it doesn't move down or up as the valve is turned to close or open. This fixed position makes it more compact than rising stem valves， so it's a good choice for areas that have limited space， like underground piping networks. This kind of gate valve is commonly used in offshore applications， power plants and water treatment facilities. It's suitable for controlling water in high-pressure systems thanks to its maximum working pressure of 20 bar. Features and Benefits. 高品質の潤滑を施したパッキング ノンライジング式ステム 圧力下で再パッキング可能 黄銅ソリッドウェッジ BSIカイトマーク取得済み: ライセンス番号KM-06045 グラビティダイキャストによる黄銅ボディ: 品番 ； 261-0340 261-0340 及び ； 261-0356 261-0356. Applications. These RS PRO brass gates valves are seen is many versatile applications including the oil and gas industry， manufacturing and automotive， examples include: Power plants Water treatment Mining and Offshore applications. Why RS PRO.. RS PRO is our own brand range and brings you a wide range of high-quality， great value products offering you more choice. Trusted by engineers all over the world， every part of every RS PRO product has been rigorously tested against demanding industry standards they ’re only given the RS PRO seal of approval if we ’re confident of their exceptional quality， which means you can be confident too. Approvals. BSI Kitemark License No. KM 06045. Standards. BS5154 - PN20； BS21

RS PRO General Purpose Enclosure， IP66 Introducing the range of RS PRO die cast aluminium General Purpose Enclosures， providing a secure enclosure， ideal for protecting electrical parts and components. These lightweight yet durable enclosures are made from die cast aluminium， providing shock-absorbent and scratch-resistant properties， ensuring ultimate protection for delicate and expensive equipment housed inside them. Each high-quality enclosure is quick and easy to install and can be mounted on flat surfaces in a variety of environments. This cost-effective RS PRO enclosure hermetically sealed for security， ensuring an IP66 protection rating， ideal for a wide range of applications and environments. Features and Benefits: These lightweight yet durable RS PRO EMC shielded enclosures offer an ideal protective solution for expensive and delicate electrical parts and components Made from high-quality die-cast aluminium with shock-absorbent and scratch-resistant properties， the enclosures provide protection from dust， moisture and any other debris that could potentially damage expensive and delicate equipment The smooth finish allows for easy cleaning and keeping the surface dust and debris free Each enclosure is quick and easy to install， saving time and valuable resource for more important tasks This range of RS PRO enclosure features an IP66 and IK09 rating， providing optimum protection for internal components and is also ATEX approved They are available in a range of different sizes to suit different specifications and come in a modern light grey colour， ideal for environments where neutral colours are preferred Supplied with lid and base， polyurethane seal， captive +/- stainless steel screws and 4 copper plated earthing screws Applications: General purpose enclosures are units that are designed to accommodate a wide variety of items for secure and safe storage. They are often used for the protection of electronics equipment and often are compliant to IP， fire resistance and corrosion-resistant， dependant on what is being stored and where it is being stored. These enclosures are such versatile units， they can be used for practically any storage application， they can be wall-mounted if needed and they can be made from a wide variety of materials like aluminium， ABS， fibreglass and much more. General purpose enclosures are often used for: Cable/Wire Management IT/Servers Solar Power Batteries Oil and Gas Production Food and Beverage Industry Telecommunication Industry What is Ingress Protection. An IP rating classifies the degrees of protection provided against the intrusion of solid objects (including body parts like hands and fingers)， dust， accidental contact and water in electrical enclosures. The first number indicates the protection from solids and the second number is the protection from liquids. Can the enclosure be used outside. This enclosure has an IP66 rating meaning it is protected against dust and water ingress， making it suitable for use outside. Why RS PRO. RS PRO is our own brand range and brings you a wide range of high-quality， great value products offering you more choice. Trusted by engineers all over the world， every part of every RS PRO product has been rigorously tested against demanding industry standards they’re only given the RS PRO seal of approval if we’re confident of their exceptional quality， which means you can be confident too.

RS PRO General Purpose Enclosure， IP66 Introducing the range of RS PRO die cast aluminium General Purpose Enclosures， providing a secure enclosure， ideal for protecting electrical parts and components. These lightweight yet durable enclosures are made from die cast aluminium， providing shock-absorbent and scratch-resistant properties， ensuring ultimate protection for delicate and expensive equipment housed inside them. Each high-quality enclosure is quick and easy to install and can be mounted on flat surfaces in a variety of environments. This cost-effective RS PRO enclosure hermetically sealed for security， ensuring an IP66 protection rating， ideal for a wide range of applications and environments. Features and Benefits: These lightweight yet durable RS PRO EMC shielded enclosures offer an ideal protective solution for expensive and delicate electrical parts and components Made from high-quality die-cast aluminium with shock-absorbent and scratch-resistant properties， the enclosures provide protection from dust， moisture and any other debris that could potentially damage expensive and delicate equipment The smooth finish allows for easy cleaning and keeping the surface dust and debris free Each enclosure is quick and easy to install， saving time and valuable resource for more important tasks This range of RS PRO enclosure features an IP66 and IK09 rating， providing optimum protection for internal components and is also ATEX approved They are available in a range of different sizes to suit different specifications and come in a modern light grey colour， ideal for environments where neutral colours are preferred Supplied with lid and base， polyurethane seal， captive +/- stainless steel screws and 4 copper plated earthing screws Applications: General purpose enclosures are units that are designed to accommodate a wide variety of items for secure and safe storage. They are often used for the protection of electronics equipment and often are compliant to IP， fire resistance and corrosion-resistant， dependant on what is being stored and where it is being stored. These enclosures are such versatile units， they can be used for practically any storage application， they can be wall-mounted if needed and they can be made from a wide variety of materials like aluminium， ABS， fibreglass and much more. General purpose enclosures are often used for: Cable/Wire Management IT/Servers Solar Power Batteries Oil and Gas Production Food and Beverage Industry Telecommunication Industry What is Ingress Protection. An IP rating classifies the degrees of protection provided against the intrusion of solid objects (including body parts like hands and fingers)， dust， accidental contact and water in electrical enclosures. The first number indicates the protection from solids and the second number is the protection from liquids. Can the enclosure be used outside. This enclosure has an IP66 rating meaning it is protected against dust and water ingress， making it suitable for use outside. Why RS PRO. RS PRO is our own brand range and brings you a wide range of high-quality， great value products offering you more choice. Trusted by engineers all over the world， every part of every RS PRO product has been rigorously tested against demanding industry standards they’re only given the RS PRO seal of approval if we’re confident of their exceptional quality， which means you can be confident too.

RS PRO General Purpose Enclosure， IP66 Introducing the range of RS PRO die cast aluminium General Purpose Enclosures， providing a secure enclosure， ideal for protecting electrical parts and components. These lightweight yet durable enclosures are made from die cast aluminium， providing shock-absorbent and scratch-resistant properties， ensuring ultimate protection for delicate and expensive equipment housed inside them. Each high-quality enclosure is quick and easy to install and can be mounted on flat surfaces in a variety of environments. This cost-effective RS PRO enclosure hermetically sealed for security， ensuring an IP66 protection rating， ideal for a wide range of applications and environments. Features and Benefits: These lightweight yet durable RS PRO EMC shielded enclosures offer an ideal protective solution for expensive and delicate electrical parts and components Made from high-quality die-cast aluminium with shock-absorbent and scratch-resistant properties， the enclosures provide protection from dust， moisture and any other debris that could potentially damage expensive and delicate equipment The smooth finish allows for easy cleaning and keeping the surface dust and debris free Each enclosure is quick and easy to install， saving time and valuable resource for more important tasks This range of RS PRO enclosure features an IP66 and IK09 rating， providing optimum protection for internal components and is also ATEX approved They are available in a range of different sizes to suit different specifications and come in a modern light grey colour， ideal for environments where neutral colours are preferred Supplied with lid and base， polyurethane seal， captive +/- stainless steel screws and 4 copper plated earthing screws Applications: General purpose enclosures are units that are designed to accommodate a wide variety of items for secure and safe storage. They are often used for the protection of electronics equipment and often are compliant to IP， fire resistance and corrosion-resistant， dependant on what is being stored and where it is being stored. These enclosures are such versatile units， they can be used for practically any storage application， they can be wall-mounted if needed and they can be made from a wide variety of materials like aluminium， ABS， fibreglass and much more. General purpose enclosures are often used for: Cable/Wire Management IT/Servers Solar Power Batteries Oil and Gas Production Food and Beverage Industry Telecommunication Industry What is Ingress Protection. An IP rating classifies the degrees of protection provided against the intrusion of solid objects (including body parts like hands and fingers)， dust， accidental contact and water in electrical enclosures. The first number indicates the protection from solids and the second number is the protection from liquids. Can the enclosure be used outside. This enclosure has an IP66 rating meaning it is protected against dust and water ingress， making it suitable for use outside. Why RS PRO. RS PRO is our own brand range and brings you a wide range of high-quality， great value products offering you more choice. Trusted by engineers all over the world， every part of every RS PRO product has been rigorously tested against demanding industry standards they’re only given the RS PRO seal of approval if we’re confident of their exceptional quality， which means you can be confident too.

RS PRO General Purpose Enclosure， IP66 Introducing the range of RS PRO die cast aluminium General Purpose Enclosures， providing a secure enclosure， ideal for protecting electrical parts and components. These lightweight yet durable enclosures are made from die cast aluminium， providing shock-absorbent and scratch-resistant properties， ensuring ultimate protection for delicate and expensive equipment housed inside them. Each high-quality enclosure is quick and easy to install and can be mounted on flat surfaces in a variety of environments. This cost-effective RS PRO enclosure hermetically sealed for security， ensuring an IP66 protection rating， ideal for a wide range of applications and environments. Features and Benefits: These lightweight yet durable RS PRO EMC shielded enclosures offer an ideal protective solution for expensive and delicate electrical parts and components Made from high-quality die-cast aluminium with shock-absorbent and scratch-resistant properties， the enclosures provide protection from dust， moisture and any other debris that could potentially damage expensive and delicate equipment The smooth finish allows for easy cleaning and keeping the surface dust and debris free Each enclosure is quick and easy to install， saving time and valuable resource for more important tasks This range of RS PRO enclosure features an IP66 and IK09 rating， providing optimum protection for internal components and is also ATEX approved They are available in a range of different sizes to suit different specifications and come in a modern light grey colour， ideal for environments where neutral colours are preferred Supplied with lid and base， polyurethane seal， captive +/- stainless steel screws and 4 copper plated earthing screws Applications: General purpose enclosures are units that are designed to accommodate a wide variety of items for secure and safe storage. They are often used for the protection of electronics equipment and often are compliant to IP， fire resistance and corrosion-resistant， dependant on what is being stored and where it is being stored. These enclosures are such versatile units， they can be used for practically any storage application， they can be wall-mounted if needed and they can be made from a wide variety of materials like aluminium， ABS， fibreglass and much more. General purpose enclosures are often used for: Cable/Wire Management IT/Servers Solar Power Batteries Oil and Gas Production Food and Beverage Industry Telecommunication Industry What is Ingress Protection. An IP rating classifies the degrees of protection provided against the intrusion of solid objects (including body parts like hands and fingers)， dust， accidental contact and water in electrical enclosures. The first number indicates the protection from solids and the second number is the protection from liquids. Can the enclosure be used outside. This enclosure has an IP66 rating meaning it is protected against dust and water ingress， making it suitable for use outside. Why RS PRO. RS PRO is our own brand range and brings you a wide range of high-quality， great value products offering you more choice. Trusted by engineers all over the world， every part of every RS PRO product has been rigorously tested against demanding industry standards they’re only given the RS PRO seal of approval if we’re confident of their exceptional quality， which means you can be confident too.

RS PRO General Purpose Enclosure， IP66 Introducing the range of RS PRO die cast aluminium General Purpose Enclosures， providing a secure enclosure， ideal for protecting electrical parts and components. These lightweight yet durable enclosures are made from die cast aluminium， providing shock-absorbent and scratch-resistant properties， ensuring ultimate protection for delicate and expensive equipment housed inside them. Each high-quality enclosure is quick and easy to install and can be mounted on flat surfaces in a variety of environments. This cost-effective RS PRO enclosure hermetically sealed for security， ensuring an IP66 protection rating， ideal for a wide range of applications and environments. Features and Benefits: These lightweight yet durable RS PRO EMC shielded enclosures offer an ideal protective solution for expensive and delicate electrical parts and components Made from high-quality die-cast aluminium with shock-absorbent and scratch-resistant properties， the enclosures provide protection from dust， moisture and any other debris that could potentially damage expensive and delicate equipment The smooth finish allows for easy cleaning and keeping the surface dust and debris free Each enclosure is quick and easy to install， saving time and valuable resource for more important tasks This range of RS PRO enclosure features an IP66 and IK09 rating， providing optimum protection for internal components and is also ATEX approved They are available in a range of different sizes to suit different specifications and come in a modern light grey colour， ideal for environments where neutral colours are preferred Supplied with lid and base， polyurethane seal， captive +/- stainless steel screws and 4 copper plated earthing screws Applications: General purpose enclosures are units that are designed to accommodate a wide variety of items for secure and safe storage. They are often used for the protection of electronics equipment and often are compliant to IP， fire resistance and corrosion-resistant， dependant on what is being stored and where it is being stored. These enclosures are such versatile units， they can be used for practically any storage application， they can be wall-mounted if needed and they can be made from a wide variety of materials like aluminium， ABS， fibreglass and much more. General purpose enclosures are often used for: Cable/Wire Management IT/Servers Solar Power Batteries Oil and Gas Production Food and Beverage Industry Telecommunication Industry What is Ingress Protection. An IP rating classifies the degrees of protection provided against the intrusion of solid objects (including body parts like hands and fingers)， dust， accidental contact and water in electrical enclosures. The first number indicates the protection from solids and the second number is the protection from liquids. Can the enclosure be used outside. This enclosure has an IP66 rating meaning it is protected against dust and water ingress， making it suitable for use outside. Why RS PRO. RS PRO is our own brand range and brings you a wide range of high-quality， great value products offering you more choice. Trusted by engineers all over the world， every part of every RS PRO product has been rigorously tested against demanding industry standards they’re only given the RS PRO seal of approval if we’re confident of their exceptional quality， which means you can be confident too.

RS PRO General Purpose Enclosure， IP66 Introducing the range of RS PRO die cast aluminium General Purpose Enclosures， providing a secure enclosure， ideal for protecting electrical parts and components. These lightweight yet durable enclosures are made from die cast aluminium， providing shock-absorbent and scratch-resistant properties， ensuring ultimate protection for delicate and expensive equipment housed inside them. Each high-quality enclosure is quick and easy to install and can be mounted on flat surfaces in a variety of environments. This cost-effective RS PRO enclosure hermetically sealed for security， ensuring an IP66 protection rating， ideal for a wide range of applications and environments. Features and Benefits: These lightweight yet durable RS PRO EMC shielded enclosures offer an ideal protective solution for expensive and delicate electrical parts and components Made from high-quality die-cast aluminium with shock-absorbent and scratch-resistant properties， the enclosures provide protection from dust， moisture and any other debris that could potentially damage expensive and delicate equipment The smooth finish allows for easy cleaning and keeping the surface dust and debris free Each enclosure is quick and easy to install， saving time and valuable resource for more important tasks This range of RS PRO enclosure features an IP66 and IK09 rating， providing optimum protection for internal components and is also ATEX approved They are available in a range of different sizes to suit different specifications and come in a modern light grey colour， ideal for environments where neutral colours are preferred Supplied with lid and base， polyurethane seal， captive +/- stainless steel screws and 4 copper plated earthing screws Applications: General purpose enclosures are units that are designed to accommodate a wide variety of items for secure and safe storage. They are often used for the protection of electronics equipment and often are compliant to IP， fire resistance and corrosion-resistant， dependant on what is being stored and where it is being stored. These enclosures are such versatile units， they can be used for practically any storage application， they can be wall-mounted if needed and they can be made from a wide variety of materials like aluminium， ABS， fibreglass and much more. General purpose enclosures are often used for: Cable/Wire Management IT/Servers Solar Power Batteries Oil and Gas Production Food and Beverage Industry Telecommunication Industry What is Ingress Protection. An IP rating classifies the degrees of protection provided against the intrusion of solid objects (including body parts like hands and fingers)， dust， accidental contact and water in electrical enclosures. The first number indicates the protection from solids and the second number is the protection from liquids. Can the enclosure be used outside. This enclosure has an IP66 rating meaning it is protected against dust and water ingress， making it suitable for use outside. Why RS PRO. RS PRO is our own brand range and brings you a wide range of high-quality， great value products offering you more choice. Trusted by engineers all over the world， every part of every RS PRO product has been rigorously tested against demanding industry standards they’re only given the RS PRO seal of approval if we’re confident of their exceptional quality， which means you can be confident too.

RS PRO General Purpose Enclosure， IP66 Introducing the range of RS PRO die cast aluminium General Purpose Enclosures， providing a secure enclosure， ideal for protecting electrical parts and components. These lightweight yet durable enclosures are made from die cast aluminium， providing shock-absorbent and scratch-resistant properties， ensuring ultimate protection for delicate and expensive equipment housed inside them. Each high-quality enclosure is quick and easy to install and can be mounted on flat surfaces in a variety of environments. This cost-effective RS PRO enclosure hermetically sealed for security， ensuring an IP66 protection rating， ideal for a wide range of applications and environments. Features and Benefits: These lightweight yet durable RS PRO EMC shielded enclosures offer an ideal protective solution for expensive and delicate electrical parts and components Made from high-quality die-cast aluminium with shock-absorbent and scratch-resistant properties， the enclosures provide protection from dust， moisture and any other debris that could potentially damage expensive and delicate equipment The smooth finish allows for easy cleaning and keeping the surface dust and debris free Each enclosure is quick and easy to install， saving time and valuable resource for more important tasks This range of RS PRO enclosure features an IP66 and IK09 rating， providing optimum protection for internal components and is also ATEX approved They are available in a range of different sizes to suit different specifications and come in a modern light grey colour， ideal for environments where neutral colours are preferred Supplied with lid and base， polyurethane seal， captive +/- stainless steel screws and 4 copper plated earthing screws Applications: General purpose enclosures are units that are designed to accommodate a wide variety of items for secure and safe storage. They are often used for the protection of electronics equipment and often are compliant to IP， fire resistance and corrosion-resistant， dependant on what is being stored and where it is being stored. These enclosures are such versatile units， they can be used for practically any storage application， they can be wall-mounted if needed and they can be made from a wide variety of materials like aluminium， ABS， fibreglass and much more. General purpose enclosures are often used for: Cable/Wire Management IT/Servers Solar Power Batteries Oil and Gas Production Food and Beverage Industry Telecommunication Industry What is Ingress Protection. An IP rating classifies the degrees of protection provided against the intrusion of solid objects (including body parts like hands and fingers)， dust， accidental contact and water in electrical enclosures. The first number indicates the protection from solids and the second number is the protection from liquids. Can the enclosure be used outside. This enclosure has an IP66 rating meaning it is protected against dust and water ingress， making it suitable for use outside. Why RS PRO. RS PRO is our own brand range and brings you a wide range of high-quality， great value products offering you more choice. Trusted by engineers all over the world， every part of every RS PRO product has been rigorously tested against demanding industry standards they’re only given the RS PRO seal of approval if we’re confident of their exceptional quality， which means you can be confident too.