学童・教育用品 ：「micro USB」の検索結果

Description。Pi Zero Micro USB to USB A is a really useful USB specification! It allows some small devices that would normally be unable to act as a host to have limited hosting capabilities! Pi Zero Micro USB to USB A is great for things like tablet co

Description。It's tiny， it's handy， and it can give your normal USB-equipped device a micro-B connector! With the USB to Micro-B Adapter you can make a flash drive connect to your tablet， connect a keyboard to your phone in order to text with ease， attach a Bluetooth(R)dongle to your RPi Zero， and more! Since this adapter is super small， it is very easy to transport anywhere you might need it --- making it extremely convenient to have in a pinch.。Installation of the USB to Micro-B Adapter is easy； simply slide it into a USB A connector， and you will instantly make that device micro-B capable!

Description。These are your standard issue USB 2.0 type to micro USB 5-pin... but wait， what's this? These cables have minor， yet genius modifications that allow both ends to be plugged into their ports regardless of their orientation. No longer will you fight the USB "super position" where both orientations of your plug seem incorrect. simple solution to problem that nearly everyone has faced. This is one of the features we love so much about USB-C， but now it works with all your Micro-B devices as well!。If you're still trying to wrap your head around the world of USB cables， why not check out our USB Buying Guide?。Features。Reversible USB-A connector。Reversible Micro-B connector

This version of the Reversible USB A to Reversible Micro-B Cable is 2.0m/～6ft length and is perfect for small applications.。2.0 meter cable length。

クリアケースは汚れや衝撃によるmicro：bitの破損を防ぎます。ネジなどは不要で付け外しも簡単です。装着しても厚さ4mmです。 ●電池ケースはスイッチ付きで、ケーブルを抜き差しせずにmicro：bitの電源をON/OFFできます。 ●USBケーブルは90cmあるため、PCにケーブルで接続したままでの使用に便利です。

Groveモジュールを接続できるmicro:bit用の拡張基板。micro:bit用Groveシールド【103030195】のアップデート版で、ユーザーから要望のあった安全面での改良が行われています。micro：bit用Groveシールドは4個のGroveコネクタを搭載し、micro：bitからセンサーやアクチュエータ、通信、ディスプレイなど各種のGroveモジュールを利用することができます。ユーザーが追加で実装できるGroveコネクタ用のピンも備えています。micro:bitに電源を供給するオンボードmicroUSBポート(micro:bitはこのキットに付属していません。)。特別なタッチ機能を持つP0、P1、P2のピンを配置しています。通常のmicro:bitと同じように、ワニ口クリップによる配線も可能です。micro：bitへの電源供給は、micro：bit用GroveシールドのmicroUSBインターフェースから可能です。

Description。The Mountable MI：pro is a simple and compact protective case for the micro：bit. This case has been specifically designed with portability and expansion in mind and is compatible with both the original micro：bit V1 and the micro：bit V2. These cases feature a three-layer construction style with ability to wall-mount the whole assembly onto any surface you want while still providing access to all buttons and ports on the micro：bit. Though these cases do feature wall-mountable tabs， the biggest benefit of using a case is to not accidentally short out the pads on the back of the micro：bit.。Construction is simple， requiring only a small flathead screwdriver， and involves layering each plate on top of one another around the micro：bit and screwing it into place. Luckily， the MI：pro case enables easy access to the edge pins at the bottom of the micro：bit， allowing it to still be plugged into an edge connector found on many of our carrier boards. The only board that cannot be used in conjunction with the MI：pro case is the SparkFun gamer：bit due to its edge connector being located in the center of the board.。Note：The MI：pro case only includes the parts found in the Includes Tab. This case does NOT include a micro：bit， power source or mounting screws. These items will need to be purchased separately.。Features。Dimensions：Length(minus the mounting brackets on the side)：65mm.。Length(with the mounting brackets on the side)：91mm.。Width：37mm.。Depth(without screws)：9mm.。Depth(with screws)：14mm.。Provides excellent protection to the BBC micro：bit whilst allowing access to the bottom pins.。Full access to the A and B buttons on the BBC micro：bit.。The mounting points allow you to fix the micro：bit to a surface for sturdy and more permanent installations.。Full access to pins and connections including the micro USB connector.。Clear case material shows the on-board LEDs in perfect clarity.。The case is compatible with versions 1 and 2 of the micro：bit.

Description。This MI：pro Protector Case for the BBC micro：bit has been designed to work with both the original micro：bit V1 and the micro：bit V2. These cases feature a four-layer construction style with ability to mount a 2xAAA battery pack to the back of the case while still providing access to all buttons and ports on the micro：bit. Though these cases do protect the micro：bit astoundingly well， the biggest benefit of using the MI：pro is to not accidentally short out the pads on the back of the micro：bit.。Construction is simple， requiring only a small flathead screwdriver(at most)， and involves layering each plate on top of one another around the micro：bit and screwing it into place. Luckily， the MI：pro Protector case enables easy access to the edge pins at the bottom of the micro：bit， allowing it to still be plugged into an edge connector found on many of our carrier boards. The only board that cannot be used in conjunction with the MI：pro case is the SparkFun gamer：bit due to its edge connector being located in the center of the board.。Note：The MI：pro Protector case only includes the parts found in the Includes Tab. This case does。NOT。include a micro：bit， power source or mounting screws. These items will need to be purchased separately.。Features。Dimensions：Length：65mm.。Width：37mm.。Depth(without screws)：12mm.。Depth(with screws)：18.5mm.。Provides excellent protection to the BBC micro：bit whilst allowing access to the bottom pins.。Full access to the A and B buttons on the BBC micro：bit.。Attach a battery cage to the rear of the case with the supplied sticky fixer.。Full access to pins and connections including the micro USB connector.。Clear case material shows the on-board LEDs in perfect clarity.。The case is compatible with versions 1 and 2 of the micro：bit.。When used in conjunction with a battery holder， micro：bit projects can be fully mobile.

Description。The XBee3 Thing Plus is an ultra capable and easy way for getting into wireless device development. The combination of XBee and Qwiic in a space conscious design represents a much needed update to our XBee offering. With 20 I/O pins and Lithium Polymer Ion battery management， the XBee3 Thing Plus has all the basics for quickly prototyping or developing a connected device such as a remote sensor. The Qwiic connector and JST connector for the battery make for a solder-less option when working with the board which shortens setup time.。The new XBee3 Micro Module provides the classic all-but plug and play 802.15.4 2.4GHz wireless connection(Zigbee 3.0 Protocol)that makes it so desirable， but with a new addition of being programmable with MicroPython(32KB of memory available for it). RF data rates up to 250 Kbps and 200ft indoor ranges and up to 4000ft line-of-sight outdoor range. Communicating with/Configuring the module happens via an AT Command set or the Digi API， X-CTU， both locally or over-the-air. There's even a mobile version of X-CTU now； Digi XBee(R)Mobile.。This variation features a U.FL antenna connector for longer range communications. Check out the related products for compatible antennas.。Get Started With the SparkFun XBee3 Thing Plus Guide。Features。XBee3 Micro Module。Silicon Labs EFR32MG SoC。250Kbps RF， 1Mbps Serial data rates。Indoor/Urban range up to 200 ft(60 m)。Outdoor/RF Line of Sight range up to 4000 ft(1200 m)。+8 dBm transmit power。-103 dBm receiver sensitivity。UART， I2C， SPI Interfaces(SPI currently not available at this time， but broken out on the board)。ISM 2.4GHz Frequency Band(802.15.4)。1MB of memory， 128KB RAM(32KB available for MicroPython)。20 GPIO Pins。Configurable via X-CTU or AT Command set via both USB and Wirelessly(second XBee 3 device required for wireless configuration unless you're using the mobile app)。Qwiic Compatible。On-board charging circuit and connector for 3.3v Lithium Polymer Ion Batteries(see related products for compatible batteries)。2.6VDC - 3.6VDC supply voltage。U.FL Antenna Connector

Description。The XBee3 Thing Plus is an ultra-capable and easy way for getting into wireless device development. The combination of XBee and Qwiic in a space-conscious design represents a much-needed update to our XBee offering. With 20 I/O pins and Lithium-Polymer Ion battery management， the XBee3 Thing Plus has all the basics for quickly prototyping or developing a connected device such as a remote sensor. The Qwiic connector and JST connector for the battery make for a solder-less option when working with the board which shortens setup time.。The new XBee3 Micro Module provides the classic， near plug and play 802.15.4 2.4GHz wireless connection(Zigbee 3.0 Protocol)that makes it so desirable， but with a new addition of being programmable with MicroPython(32KB of memory available for it). RF data rates up to 250Kbps and 200 ft indoor ranges and up to 4000 ft line-of-sight outdoor range. Communicating with/Configuring the module happens via an AT Command set or the Digi API， X-CTU， both locally or over-the-air. There's even a mobile version of X-CTU now； Digi XBee(R)Mobile.。Note：This variation uses a chip antenna and is not compatible with external antennas.。Get Started With the SparkFun XBee3 Thing Plus Guide。Features。XBee3 Micro Module。Silicon Labs EFR32MG SoC。250Kbps RF， 1Mbps Serial data rates。Indoor/Urban range up to 200 ft(60 m)。Outdoor/RF Line of Sight range up to 4000 ft(1200 m)。+8 dBm transmit power。-103 dBm receiver sensitivity。UART， I2C， SPI Interfaces(SPI currently not available at this time， but broken out on the board)。ISM 2.4GHz Frequency Band(802.15.4)。1MB of memory， 128KB RAM(32KB available for MicroPython)。20 GPIO Pins。Configurable via X-CTU or AT Command set via both USB and Wirelessly(second XBee 3 device required for wireless configuration unless you're using the mobile app)。Qwiic Compatible。On-board charging circuit and connector for 3.3v Lithium Polymer Ion Batteries(see related products for compatible batteries)。2.6VDC - 3.6VDC supply voltage。On-board Chip Antenna

フルカラーLEDを光らせるmicro：bit用拡張モジュール。yin：bitは、ボード上のUSBコネクタに電源を供給することで、フルカラーLED(WS2812B)を安定して光らせることができるmicro：bit用の拡張モジュールです。Grove互換コネクタ付きフルカラーLEDの一部にも対応しています。micro：bitでフルカラーLEDを点灯させるモジュールは他にもありますが、micro：bitが出力する3.3VをフルカラーLEDの電源として使っているものや、単3電池×3本を使用して

水センサで土壌の水分量を検出し、デジタル制御マイクロポンプで自動で水やりができる実験セットです。中学校の技術家庭科「生物の育成技術」の単元で使用できます。

Description。The micro：bit v2 Educator's Lab Pack includes 10 micro：bit v2 boards and everything you need to get you started with the new learning platform. The Lab Pack has everything you need， including micro：bits， cables， battery packs and a few parts to experiment with. This package provides an easy way to introduce your students to the micro：bit without any difficulty or parts hunting.。SparkFun packages everything educators need to get started with the micro：bit in a variety of classroom settings and learning environments. The hardware boards， cables and extra parts come pre-packaged. Examples and curriculum materials are available from SparkFun and micro：bit， as well as from other educators involved in this growing maker education movement.。Lab Packs are your classroom entry point. By combining our kits， popular boards and other educational tools with support materials(to be updated)， SparkFun brings all the power of the open source community to the classroom. We've also updated the battery pack to be closer to what is in other micro：bit kits. It now requires 2xAAA batteries.。The micro：bit is a pocket-sized computer that lets you get creative with digital technology. Between the micro：bit and our shield-like bit boards you can do almost anything while coding， customizing and controlling your micro：bit from almost anywhere! You can use your micro：bit for all sorts of unique creations， from robots to musical instruments and more. At half the size of a credit card， this versatile board has vast potential!。。Features。Micro：bit 2.0：64 MHz Arm Cortex-M4 with FPU。512KB Flash。128KB RAM。5x5 Red LED Array。Two Programmable Buttons， one touch sensitive logo。MEMS microphone and LED indicator。Onboard Light， Compass， Accelerometer， Temp Sensors and Speaker。2.4 Ghz Micro：bit Radio/BLE 5.0 Smart Antenna。25-pin Edge Connector。4 dedicated GPIO， PWM， i2c， SPI， and ext. power。Three Digital/Analog Input/Output Rings。Two Power Rings --- 3V and GND。Dedcated I2C bus for peripherals。MicroUSB Connector(5V)。JST-PH Battery Connector(。Not。JST-XH)(3V)。Power/reset Button with Status LED。200 mA available for accessories。Program with C++， MakeCode， Python， Scratch

PGConをPCと接続するための専用ケーブル!

Description。With the cost of microSD cards on a consistent rise， it's always useful to have an economical and reliable option as a backup for storing your files. This sleek， red 16GB thumb drive has been emblazoned with our SparkFun Electronics logo a

Description。This is the Logitech C270 Webcam. With a sleek compact look and a black finish， this is not just for looks. This economical choice provides a 720p/30FPS HD resolution in a 16：9 widescreen format. The Logitech C270 webcam is compatible with most major messaging applications like Skype， Windows Live Messenger， Yahoo Messenger and more， giving you a wide selection of use.。Fluid Crystal technology provides smoother videos， sharper pictures， richer colors and clearer sound in real-world conditions. With the automatic light correction， even if you make a video call in dim or poorly backlit settings， the camera will intuitively adjust to produce the best possible image.。The built-in noise-reducing mic makes sure your voice comes across clearly， even if you're in busy surroundings. This flexible webcam comes with a universal clip for mounting so you can either attach it securely to your screen or sit it on a shelf.。Features。USB port。Max Resolution - 720p/30fps。16：9 Widescreen。Photo Resolution - 3MP。Focus Type - Fixed focus 40cm and beyond。Lens Type - Plastic。Auto Light Correction。Built-in mic with noise cancellation - mono。Field of View 60°

TWELITE用のUSB接続アダプター。TWELITE DIPやTWELITE PALをパソコンとUSB Type-Cで接続するためのアダプターです。TTWELITE-Rの後継品になります。TパソコンからTWELITEにアプリの設定や書き込みをする際に使用します。TモバイルバッテリーやUSB電源からTWELITEに電源を供給する際に使用することもできます。T。RoHS対応により新環境基準に準拠。【TWELITE Rとの違い】。USBコネクタをmicroUSBからUSB Type-Cに変更しました。TWELITE Rと比べて製品サイズが小さくなりました。ピンヘッダを5ピンから7ピンに変更しました。以下の部品を廃止しました。-ブレッドボード接続用のスルーホール。-プログラムボタン。-リセットボタン。-電源切替ジャンパスイッチ

。Description。USB-C is fantastic. What makes this cable even better is that one of the features we love so much about USB-C has been replicated to the USB-A 2.0 plug! These cables have minor， yet genius modifications that allow them to be plugged into their ports regardless of orientation. No longer will you fight the USB "super position" where both orientations of your plug seem incorrect. A simple solution to a problem that nearly everyone has faced.。Until we have converted all our hubs， chargers， and ports over to USB-C this is the cable you're going to need for basic USB 2.0 connections. This cable is much thinner and flexible than its 3.1 counterpart and is perfect for USB to serial applications as well as for direct connection to basic microcontrollers.。This cable has the D+/D- wires along side large-gauge VBUS/GND wires. Rated for 2A， we've successfully pulled 2A@5V with minimal voltage drop. If you're looking for a the full USB-C implementation checkout our USB 3.1 cable.。Features。Reversible USB-A connector。Reversible USB-C connector

Description。USB-C is fantastic. What makes this cable even better is that one of the features we love so much about USB-C has been replicated to the USB-A 2.0 plug! These cables have minor， yet genius modifications that allow them to be plugged into their ports regardless of orientation. No longer will you fight the USB "super position" where both orientations of your plug seem incorrect. A simple solution to a problem that nearly everyone has faced.。Until we have converted all our hubs， chargers， and ports over to USB-C this is the cable you're going to need for basic USB 2.0 connections. This cable is much thinner and flexible than its 3.1 counterpart and is perfect for USB to serial applications as well as for direct connection to basic microcontrollers.。This cable has the D+/D- wires along side large-gauge VBUS/GND wires. Rated for 2A， we've successfully pulled 2A@5V with minimal voltage drop. If you're looking for a the full USB-C implementation checkout our USB 3.1 cable.。Features。Reversible USB-A connector。Reversible USB-C connector

Description。USB-C is fantastic. What makes this cable even better is that one of the features we love so much about USB-C has been replicated to the USB-A 2.0 plug! These cables have minor， yet genius modifications that allow them to be plugged into their ports regardless of orientation. No longer will you fight the USB "super position" where both orientations of your plug seem incorrect. A simple solution to a problem that nearly everyone has faced.。Until we have converted all our hubs， chargers， and ports over to USB-C this is the cable you're going to need for basic USB 2.0 connections. This cable is much thinner and flexible than its 3.1 counterpart and is perfect for USB to serial applications as well as for direct connection to basic microcontrollers.。This cable has the D+/D- wires along side large-gauge VBUS/GND wires. Rated for 2A， we've successfully pulled 2A@5V with minimal voltage drop. If you're looking for a the full USB-C implementation checkout our USB 3.1 cable.。Features。Reversible USB-A connector。Reversible USB-C connector

アーテックロボ2.0専用80cmタイプ

。※ACアダプターは同梱されておりません。Description。The ZedBoard is a low-cost development board for the Xilinx Zynq-7000 all programmable SoC(APSoC).Take advantage of the Zynq-7000 APSoCs tightly coupled ARMprocessing system and 7-Series programmable logic to create unique and powerful designs with the ZedBoard. This board contains everything necessary to create a Linux， Android， Windows， or other OS/RTOS based design. Additionally， several expansion connectors expose the processing system and programmable logic I/Os for easy user access.Target applications include video processing， reconfigurable computing， motor control， software acceleration， Linux/Android/RTOS development， exploring RISC processors(ARM)， and general Zynq-7000 AP SoC prototyping.The ZedBoard is supported by Xilinx's Vivado Design Suite， including the free WebPACK version.Guides and demos are available to help users get started quickly with the ZedBoard. These can be found through the Support Materials tab. Additional resources can be found through www.zedboard.org， a community website where users can collaborate with other engineers also working on Zynq designs.。Features。XilinxZynq-7000 AP SoC XC7Z020-CLG484。Dual-core ARMCortex-A9 processor。512 MB DDR3。256 MB Quad-SPI Flash。On-board USB-JTAG Programming。10/100/1000 Ethernet。USB OTG 2.0 and USB-UART。Analog Devices ADAU1761 SigmaDSP Stereo， Low Power， 96 kHz， 24-Bit Audio Codec。Analog Devices ADV7511 High Performance 225 MHz HDMI Transmitter(1080p HDMI， 8-bit VGA， 128x32 OLED)。PS & PL I/O expansion(FMC， Pmod， XADC)。What's Included。ZedBoard APSoC development board。Custom Digilent cardboard box with protective foam。4 GB SD Card。USB A to micro-B cable。USB Adapter：Male Micro-B to Female Standard-A

。Raspberry Pi財団が開発したマイコンRP2040を搭載した超小型ボード。Picoは、Raspberry Pi財団が開発したマイコンRP2040(Arm Cortex-M0+デュアルコア@133MHz)を搭載し、2MBの高速なFlashメモリー、1.8～5V入力に対応する電源ICを搭載したシンプルなマイコンボードです。超小型(micro：bitの半分程度)でありながら、柔軟性を損なうことなくRP2040マイコンのフル機能にアクセスできます。学習やホビー用途はもちろん、組込み用途などへの応用も考慮して設計されています。Picoでは、Python(MicroPython)やC/C++で作られたプログラムを実行できます。USB Flashから専用のバイナリファイルをPicoにコピーするだけでソフトウェアの書き込みができる仕様となっています。ストレージとしてのSDカードのスロットはありません。Linux OSは搭載できません。USBケーブルやピンヘッダは付属していませんので、別途お買い求めください。

Description。The Cmod， or Carrier Module， family of products is designed to offer quick， simple， and flexible integration of an FPGA into circuit design， prototyping， and learning/hobby projects.The Digilent Cmod S7 is a small， 48-pin DIP form factor board， populated with 36 pins， built around a Xilinx Spartan-7 FPGA that brings FPGA power and prototyping to a solderless breadboard.The board includes a Quad-SPI flash for programming， as well as a USB-JTAG programming circuit and USB-UART bridge. The Cmod S7 also features a clock source， Pmod port， and onboard I/O with LEDs and pushbuttons. There are 32 FPGA I/O signals， 2 FPGA analog input signals， an external power input rail， and ground that are routed to 100-mil-spaced through-hole pins， making the Cmod S7 compatible with solderless breadboards. This form factor makes the Cmod S7 a great option for flexible and affordable prototyping， or learning FPGA and digital logic circuits. At just .7 by 3.05， it can also be loaded in a standard socket and used in embedded systems.The Spartan-7 FPGA on the Cmod S7 fits performance into a small form-factor packaging. With the MicroBlaze Soft Processor Core from Xilinx， you can create embedded applications with a variety of peripherals， memory， and interfaces.If your design requires transceiver lines or more FPGA resources， we recommend the higher-performance Cmod A7， featuring an Artix-7 FPGA.Guides and demos are available to help users get started quickly with the Cmod S7. These can be found through the Support Materials tab.。Features。Xilinx Spartan-7 FPGA(XC7S25-1CSGA225C)。〇3，650 slices containing four 6-input LUTs and 8 flip-flops。〇1，620 Kbits of fast block RAM。〇Three clock management tile， each with a phase-locked loop and mixed-mode clock manager。〇80 DSP slices。〇Internal clock speeds exceeding 450 MHz。〇On-chip analog-to-digital converter(XADC)。〇Programmable over JTAG and Quad-SPI Flash。Memory。〇4 MBQuad-SPI Flash。Power。〇Powered from USB or 5V external supply connected to DIP pin 24(micro USB cable NOT included)。USB。〇USB-JTAG programming circuitry。〇USB-UART bridge。Push-buttons and LEDs。〇2 Buttons。〇4 LEDs。〇1 RGB LED。Expansion Connectors。〇1 Pmod connector。8 total FPGA I/O。〇48-pin DIP form-factor headers。36 populated pins。■32 total FPGA I/O。■2 Single-ended 0-3.3V analog inputs to XADC。Product Compliance：。〇HTC：8473301180。〇ECCN：EAR99。What's Included。Cmod S7 Module。Custom Digilent cardboard box with protective foam

Description。This is the PICkit 4， the official programmer from Microchip. The PICkit 4 allows debugging and programming of PIC(R)， dsPIC(R)， AVR， SAM and CEC flash microcontrollers and MPUs using the powerful graphical user interface of the MPLAB X Integrated Development Environment(IDE). The MPLAB PICkit 4 is connected to a PC using a high-speed 2.0 USB interface and can be connected to the target via an 8-pin Single In-Line(SIL)connector. The connector uses two device I/O pins and the reset line to implement in-circuit debugging and In-Circuit Serial Programming(TM)(ICSP(TM)). An additional micro SD card slot and the ability to be self-powered from the target means you can take your code with you and program on the go. Comes with a USB to micro-B USB cable.。Features。Powered by a high-speed USB 2.0， no external power required。Real-time execution。MPLAB X IDE compatible(free copy included)。Built-in over-voltage/short circuit monitor。Firmware upgradeable from PC/web download。Fully enclosed。Target voltage of 1.20V to 5.5V。Can supply up to 50mA of power to the target。Minimal current consumption at <100μA from target。Diagnostic LEDs(power， busy， error)。Read/write program and data memory of microcontroller。Erase of program memory space with verification。Freeze-peripherals at breakpoint。8-pin single in-line header supports advanced interfaces such as 4-wire JTAG and Serial Wire Debug with streaming Data Gateway。Backward compatible for demo boards， headers and target systems using 2-wire JTAG and ICSP

ブロックを組替えることで2種のモデルが作製できます。micro:bitを搭載したコントロールボックスを使用することで、より多くのセンサやモーターを使用できます。

電気の利用の実験がリーズナブルにできる。「micro:bit」をベースにした電気の利用セットの簡易版で、お求めやすい価格を実現しました。人感センサや光センサなどを利用し、実生活におけるスイッチ制御を学習できます。

人感センサ・光センサ搭載教科書の内容に沿った実験ができるセットはコレ。世界中でプログラミング教材として使われている「micro:bit」をベースにしたセット。人感センサと光センサ搭載で、教科書の内容に沿った実験ができます。また、搭載されている複数のセンサと付属の外部温度センサにより、多彩なプログラミングにチャレンジできます。

LPC1114FDH28マイコンボード。mbed LPC1114FN28のマイコン部分をSOPのLPC1114FDH28に置き換えた基板です。接続はUSB2.0ですが、USB Type-Cのレセプタクルが付いています。USBケーブルでパソコンと接続するとドライブとして認識され、プログラムの書き込みができます。Mbedのオンラインコンパイラを使用してプログラムを開発し、ダウンロードしたバイナリファイルをドラッグ&ドロップするだけで、マイコンにプログラムを書き込むことができます。インターフェースとしてUSB-UARTブリッジ、CMSIS-DAPデバッグアダプタ機能も搭載しています。LPC1114FDH28の15ピンと16ピンのUARTはUSB-UARTブリッジに接続されているので、シリアル通信が可能です。BLとISPの2つのタクトスイッチが実装され、BLスイッチを押すとLPC1114FDH28をリセットできます。ISPスイッチはインターフェースチップのファームウェアを書き換えるISPモードにするために使用します。【mbed LPC1114FN28との違い】。マイコンのパッケージがDIP28ピンからSOP28ピンに変更。ICソケットではなく直接はんだ付け。USBコネクタがmicroUSBからUSB Type-Cに変更。【資料】。回路図(PDF)。mbed LPC1114FN28 mbed.orgのmbed LPC1114FN28ページ。mbed LPC1114FN28 の使い方 ユーザーの方が書かれたblog。Mbed OS 2のサポートがいつ終わってもよいようにローカル環境を構築する方法。

人感センサ・光センサ搭載教科書の内容に沿った実験ができるセットはコレ。世界中でプログラミング教材として使われている「micro:bit」をベースにしたセット。人感センサと光センサ搭載で、教科書の内容に沿った実験ができます。また、搭載されている複数のセンサと付属の外部温度センサにより、多彩なプログラミングにチャレンジできます。

生産終了製品。本製品は在庫がなくなり次第、販売を終了します。Microchip社のPIC32マイクロコントローラを搭載したArduino Unoと同じサイズのArduino互換ボードです。Arduinoシールドとも互換性があります。Arduino IDEに接続するUSBポートを備えており、USBまたは外部電源を介して電力を供給します。

。Description。The official case for the Raspberry Pi 4. This case ships as two parts made of ABS plastic with access to all USB， HDMI， Audio/Video， USB and Ethernet ports. In addition， a slot on the bottom gives access to the MicroSD card. The top and bottom parts are press fit and comes in two-tone black and gray.

加速度、回転運動、高度を測定するセンサです。力学台車の上に載せて加速度の測定や、エレベーター内の加速度の測定などに使用できます。お持ちのパソコンやタブレット、スマートフォンとワイヤレスで接続できます(USB接続も可能)。リモートログ機能：センサ本体にデータを直接保存できるリモートログ機能を搭載。これにより、ロケットやジェットコースターなど、Bluetoothが届かないところでも測定が可能になります。

。Description。The SparkFun MicroMod Update Tool is built to interface with the MicroMod Asset Tracker Carrier Board and also makes it simple to communicate directly with the u-blox SARA-R510M8S module using u-blox's sophisticated m-center cellular evaluation software. If you're familiar with u-center， u-blox's GNSS evaluation software， you'll know how excellent their software is. m-center is every bit as good. Attach a USB-C cable and away you go!。The Update Tool is not a full MicroMod Processor Board， it is much simpler than that. It has a CH340C USB-Serial converter on it which gives you full access to all eight pins of the SARA-R5's UART interface via the Asset Tracker's USB-C connector. Think of it as a bridge from USB to serial.。The Update Tool features eight pairs of Plated Through Hole connections for the UART signals. You can use these to connect directly to the SARA UART using 3.3V signals if you want to. The split pads on the rear of the Tool can be opened to isolate the CH340C completely； the pins nearest the M.2 will link straight to the SARA UART.。Get Started with the MicroMod Update Tool Hookup Guide。Features。CH340C USB-Serial converter。Eight pairs of Plated Through Hole connections with split pad jumper links for：Serial Transmit(TX)。Serial Receive(RX)。Request To Send(RTS)。Clear To Send(CTS)。Data Terminal Ready(DTR)。Data Set Ready(DSR)。Ring Indicator(RI)。Data Carrier Detect(DCD)。LED indicator for：Power(3.3V)

Description。The new PureThermal Mini Pro JST-SR with Thermal by FLIR is a hackable thermal camera for the FLIR Lepton thermal imaging camera core. Just like its PureThermal 2 predecessor， it ships pre-configured to operate as a plug-and-play UVC 1.0 USB thermal webcam that will work with standard webcam and video apps on all major platforms using a JST-SR to USB Cable， or your own custom cable. For developers， its reference firmware and viewer software are open source.。It has multiple connection options such as solder straight to the board or a custom cable using the JST-SR port. The PTMini Pro also features four mounting holes， less complex circuitry， and perhaps best of all， USB DFU. This is a development kit ready to be embedded into a production system.。Each board comes with a FLIR Lepton 3.5.。The FLIR Lepton(R)is a radiometric-capable LWIR camera solution that is smaller than a dime， fits inside a smartphone， and is one tenth the cost of traditional IR cameras. Using focal plane arrays of either 160x120 or 80x60 active pixels， Lepton easily integrates into native mobile-devices and other electronics as an IR sensor or thermal imager. The radiometric Lepton captures accurate， calibrated， and noncontact temperature data in every pixel of each image.。Features。PureThermal：Compatible with all production FLIR Leptons， including radiometric 2.5 and 3.5 cores。9 Hz color video over usb using the USB UVC class。STM32F412 ARM microprocessor - execute on-board image processing without need for an external system。Open source reference firmware：GroupGets PureThermal Github。Works with GetThermal - our custom open source thermal video display software for macOS and Linux with radiometric support。DFU over USB using a JST-SR port to USB cable， or a modified USB cable and the through holes.。Four mounting holes。Compact form-factor ready to be embedded into production systems。FLIR Lepton 3.5：Thermal sensitivity：< 50 mK(0.050℃)。Spectral Range：8 - 14 microns(nominal)Long Wave Infrared(LWIR)。Resolution：160h×120v pixels。Radiometric Accuracy - High Gain Mode：Greater of +/- 5℃ or 5%(typical)； Low Gain Mode：Greater of +/- 10℃ or 10%(typical)。Scene Dynamic Range - High Gain Mode：-10° to +140℃； Low Gain Mode：-10° to +400℃(at room temperature)， -10° to +450℃(typical)。Pixel Size：12 micrometers。Frame Rate：8.7 Hz(effective)。Output Format：User-selectable 14-bit， 8-bit(AGC applied)， or 24-bit RGB(AGC and colorization applied)。Horizontal Field of View(HFOV)：57°。Lens Type：f/1.1。Size(w×l×h)：10.50×12.70×7.14 mm。Weight：0.9 grams。Power Consumption：150 mW typical， 650 mW during shutter event， 5mW standby。Optimum Operating Temperature Range：-10℃ to + 80℃