「has-10」の検索結果

トライドンクランプは、高品質のステンレススチールを使用しておりますので、耐食性・耐久性に優れ各業界で好評をいただき、品質・価格・安定供給に於てご満足を頂いております。

刃先にフッ素加工を施し、のりの付きにくさが大幅アップしました。 また、トップスライダー構造なので、利き手を選びません。 本体の質感と形状にこだわり、抜群のフィット感を実現しました。 差し込んで折るだけで、正しい位置・正しい方向に折ることができる刃折ケースが標準で付属しています。 刃折りに失敗して刃先が欠けることが減り、常にシャープな切れ味を保てます。 刃に触れずに交換できる構造を開発しました。(シリーズ製品の替刃ケースを使用した場合) 刃の保管・交換・廃棄までの安心を考えた〈フレーヌ〉シリーズの替刃をぜひご利用ください。

溶接用のアンカー 各種金物の溶接ができます。 簡単な打ち込み施工。

ヘッドが軟鉄のため焼き入れ鋼に傷をつけずに打撃ができます。 グラスファイバー柄を採用し、軽量で耐久性に優れています。 握りやすく、滑りにくいグリップです。

ヤスリ形状が舟の底の様に曲がっており、なめらかな曲面仕上げが必要とされる箇所、凹んだ溝部の研削、面取りなど、 従来のまっすぐなヤスリでは削りにくい箇所でも、スムーズに作業できます。 プロの職人さんのためのヤスリです。

各種金物の溶接ができます。簡単な打ち込み施工。

垂直アルミステップ用 連結部です。 スタンドパイプ固定式。 ※連結部材は最大長さ10m以内で組み合わせ可能。

垂直アルミステップF式用 連結部です。 スタンドパイプの長さを標準タイプで180mm調整可。 左右で別々に長さを調整可能なため、起伏のある壁面にも柔軟に設置可能です。 ※連結部材は最大長さ10m以内で組み合わせ可能。

HAS-Pシリーズ.単極ホール効果電流測定器差込み導体の測定出力電圧：±4V複雑な信号を測定できる高精度・良好な直線性低温度ドリフト本体材質：プラスチック/PC-PBT使用温度範囲：-10→+80℃二次側コネクタ：品番：543-7738543-7738

MicroATX対応ながらもトンネル構造が採用されているミニタワーPCケースです。 電源/HDDはボトム配置となっており、それらを覆うように専用カバーが施されたトンネル構造により、小型ながらも統一感ある内部配置を実現しています。 実用的なケーブルマネジメントシステムを採用するため、いくつも用意された開口部や凹み部分を利用して、全ての部品の配線を整然とすると同時に、ケース内のエアフローを最適な状態に維持することができます。 トンネルには最長24cmまでの電源ユニットを配置できるスペースがあり、電源ユニット長が長い場合や、配線スペースを考慮する必要がある場合なども想定し、移動調整可能なHDDケージを採用。フロントパネル方向に最大4cm移動させることができます。 グラフィックカードは最長40cm、またCPUクーラーは最長15.5cmまで対応しています。 オーソドックスなフロントパネルデザインですので、パーソナル/ビジネス問わず、様々な場所でご利用いただけます。 2つの120mmファンが標準搭載されています。 フロントパネル裏面に備わったファンは、吸気用として設置されており、フレッシュな外気を内部に供給します。 もう1つのファンは排気用としてリアパネルに取り付けられています。 フロントパネル裏、ボトムパネルには着脱可能なダストフィルターが備わっており、いつでも即座の清掃を施すことが可能です。 便利なレールシステムにより、ケース底部のトンネル内には、ツールレスのゲージに3.5インチor2.5インチHDD/SSDを2台取り付け可能です。

The RS Pro oil seal typemetric nitrile single has 10mm internal diameter 22mm outer diameter and 6mm thick. Nitrile is the most cost effective and commonly available oil seal material. Commonly used in driveshafts， crankshafts and hydraulic cylinders whererotating shaft is lubricated by oil or grease. NBR is good for applications where the oil seal requires resistance to lubrication oils， hydraulic fluids and grease. Nitrile oil seals are not suitable for use with brake oil， phosphoric ester and ester base.Colour: Black Operating temperature range: -20℃ to 90℃

The RS Pro oil seal typemetric nitrile double has 10mm internal diameter， 18mm outer diameter and 8mm thick. Nitrile is the most cost effective and commonly available oil seal material. Commonly used in driveshafts， crankshafts and hydraulic cylinders whererotating shaft is lubricated by oil or grease. NBR is good for applications where the oil seal requires resistance to lubrication oils， hydraulic fluids and grease. Nitrile oil seals are not suitable for use with brake oil， phosphoric ester and ester base.Colour: Black Operating temperature range: -20℃ to 90℃

The RS Pro oil seal typemetric nitrile single has 10mm internal diameter 22mm outer diameter and 8mm thick. Nitrile is the most cost effective and commonly available oil seal material. Commonly used in driveshafts， crankshafts and hydraulic cylinders whererotating shaft is lubricated by oil or grease. NBR is good for applications where the oil seal requires resistance to lubrication oils， hydraulic fluids and grease. Nitrile oil seals are not suitable for use with brake oil， phosphoric ester and ester base.Colour: Black Operating temperature range: -20℃ to 90℃

RS PRO 10 Pole Jumper LinkFrom RS PRO a high-quality jumper link designed for use with Optocouplers. This jumper link is male with a straight orientation， has 10 contact poles， 6.1mm pitch and a voltage rating of 630V.Also known as；. Side insert bridge . Short circuit platesFeatures and Benefits. 10 Poles . Operating Temperature -40℃ to 105℃ . Insulating material: PA66 . Insert Material: Copper alloy/ Tin platedSpecification. Approvals: UL IEC . Dimension A: 54.9 mm . Dimension B: 60.4 mm . Insulation withstands voltage 2000 Vac/1 min . Voltage: 630 V . Colour: Grey . Amperage: 32 ampsCompatible Optocouplers. RE-0014， RE-0504， RE-0514， RE-0554， RE-0564， RE-2604， RE-2614 and RE-2674ApplicationsRS PRO jumper links are used with Optocouplers in a wide range of applications such as；. Communications equipment . Process automation . Machine controlsWhy would you choose RS PRO .RS PRO is our own brand range and brings you a wide range of high-quality， great value products offering you more choice. Trusted by engineers all over the world， every part of every RS PRO product has been rigorously tested against demanding industry standards and only given the RS PRO Seal of Approval if we’re confident of their exceptional quality， which means you can be confident too.

ネジたてが出来ない薄板のかしめが可能です。反対側に手の廻らない箇所のかしめが可能です。

。USB 3.2 Gen 2 (USB 3.1) USB(A)-Type-Cケーブルの特徴。。ACアダプターやパソコンからスマートフォン、カメラ、イヤホンなどの充電やデータ通信に使用でき、モバイルバッテリーからも充電が可能です。さらに、コネクタはリバーシブルデザインになっており、どちらの向きでも差し込める便利な仕様です。【商品詳細】。規格：USB Type-C 3.2 Gen2 (USB 3.1)。ケーブル長さ：1m。転送速度：最大10Gbps(3m以内)、5Gbps(5m以上)。充電能力：最大5V 3.0A。【Quick Charge 3.0対応】。Qualcomm社のQuick Charge 3.0規格に対応しており、対応するAndroid端末と急速充電器を組み合わせることで、短時間での充電が可能です。Quick Charge 2.0にも対応しており、充電がより効率的に行えます。【56KΩレジスタ実装で安全性を確保】。USB Type-C端子は、従来のUSB Type-A端子に比べて大きな電力を供給できます。しかし、片方がUSB Type-Aの場合は、性能に制限がかかることがあります。そのため、このケーブルには56KΩレジスタが実装されており、安全に適切な電流が流れるようになっています。これにより、デバイスの破損を防ぐことができます。ご安心してお使いください。※ただし、ご使用のデバイスの性能によって供給される電流値は異なります。※USB Power Delivery(USB PD)には対応していません。【対応機種】。NEC (USB Type-C端子搭載機種)。・タブレット。LAVIE T08。LAVIE T11。LAVIE Tab T8。LAVIE Tab T9。LAVIE Tab T10。LAVIE Tab T11。LAVIE Tab T12。LAVIE Tab T14。PC LAVIE Tab T11。T0995/HAS。T1495/HAS。・ルーター。Speed Wi-Fi 5G X11。Speed Wi-Fi NEXT WX05。Speed Wi-Fi NEXT WX06。Bang & Olufsen。・イヤホン・ヘッドホン。Beoplay E8 Sport。Beoplay E8 3rd Gen。Beoplay E8 2.0。Beoplay E8 Motion。Beoplay H9 3rd GEN。Beoplay H9i。Beoplay H8i。Beoplay H4 2nd Gen。Beoplay H9。・スピーカー。Beosoud A1 2nd Gen (第2世代)。Beoplay P2。Beoplay P6。Beolit 17。Beoplay A1。Beoplay A2 Active。オウルテック/Owltech。・イヤホン・ヘッドホン。SAMU-SE04S。Samu-SE05。ハーマンカードン。・イヤホン・ヘッドホン。FLY TWS。・スピーカー。Esquire Mini 2。すべての対応機種は記載できておりません。

The RS Pro piezo buzzer works on 10 to 20VDC and provide 95dB at 1 metre. It has pulse/continuous mode and has -20℃ to +60℃ operating temperature. It has 2900±500Hz resonant frequency.Panel mount buzzer with ABS material housing

The RS Pro piezo buzzer works on 10 to 28VDC and provide 95dB at 1 metre. It has pulse/continuous mode and has -20℃ to +60℃ operating temperature. It has 2900±500Hz resonant frequency.Panel mount buzzer with ABS material housing

The RS Pro oil seal typemetric nitrile single has 75mm internal diameter 90mm outer diameter and 10mm thick. Nitrile is the most cost effective and commonly available oil seal material. Commonly used in driveshafts， crankshafts and hydraulic cylinders whererotating shaft is lubricated by oil or grease. NBR is good for applications where the oil seal requires resistance to lubrication oils， hydraulic fluids and grease. Nitrile oil seals are not suitable for use with brake oil， phosphoric ester and ester base.Colour: Black Operating temperature range: -20℃ to 90℃

The RS Pro oil seal typemetric nitrile single has 44mm internal diameter 62mm outer diameter and 10mm thick. Nitrile is the most cost effective and commonly available oil seal material. Commonly used in driveshafts， crankshafts and hydraulic cylinders whererotating shaft is lubricated by oil or grease. NBR is good for applications where the oil seal requires resistance to lubrication oils， hydraulic fluids and grease. Nitrile oil seals are not suitable for use with brake oil， phosphoric ester and ester base.Colour: Black Operating temperature range: -20℃ to 90℃

The RS Pro oil seal typemetric nitrile single has 12mm internal diameter 37mm outer diameter and 10mm thick. Nitrile is the most cost effective and commonly available oil seal material. Commonly used in driveshafts， crankshafts and hydraulic cylinders whererotating shaft is lubricated by oil or grease. NBR is good for applications where the oil seal requires resistance to lubrication oils， hydraulic fluids and grease. Nitrile oil seals are not suitable for use with brake oil， phosphoric ester and ester base.Colour: Black Operating temperature range: -20℃ to 90℃

The RS Pro oil seal typemetric nitrile single has 20mm internal diameter 42mm outer diameter and 10mm thick. Nitrile is the most cost effective and commonly available oil seal material. Commonly used in driveshafts， crankshafts and hydraulic cylinders whererotating shaft is lubricated by oil or grease. NBR is good for applications where the oil seal requires resistance to lubrication oils， hydraulic fluids and grease. Nitrile oil seals are not suitable for use with brake oil， phosphoric ester and ester base.Colour: Black Operating temperature range: -20℃ to 90℃

The RS Pro oil seal typemetric nitrile single has 20mm internal diameter 35mm outer diameter and 10mm thick. Nitrile is the most cost effective and commonly available oil seal material. Commonly used in driveshafts， crankshafts and hydraulic cylinders whererotating shaft is lubricated by oil or grease. NBR is good for applications where the oil seal requires resistance to lubrication oils， hydraulic fluids and grease. Nitrile oil seals are not suitable for use with brake oil， phosphoric ester and ester base.Colour: Black Operating temperature range: -20℃ to 90℃

The RS Pro oil seal typemetric nitrile single has 60mm internal diameter 75mm outer diameter and 10mm thick. Nitrile is the most cost effective and commonly available oil seal material. Commonly used in driveshafts， crankshafts and hydraulic cylinders whererotating shaft is lubricated by oil or grease. NBR is good for applications where the oil seal requires resistance to lubrication oils， hydraulic fluids and grease. Nitrile oil seals are not suitable for use with brake oil， phosphoric ester and ester base.Colour: Black Operating temperature range: -20℃ to 90℃

The RS Pro oil seal typemetric nitrile single has 55mm internal diameter 75mm outer diameter and 10mm thick. Nitrile is the most cost effective and commonly available oil seal material. Commonly used in driveshafts， crankshafts and hydraulic cylinders whererotating shaft is lubricated by oil or grease. NBR is good for applications where the oil seal requires resistance to lubrication oils， hydraulic fluids and grease. Nitrile oil seals are not suitable for use with brake oil， phosphoric ester and ester base.Colour: Black Operating temperature range: -20℃ to 90℃

The RS Pro oil seal typemetric nitrile single has 22mm internal diameter 40mm outer diameter and 10mm thick. Nitrile is the most cost effective and commonly available oil seal material. Commonly used in driveshafts， crankshafts and hydraulic cylinders whererotating shaft is lubricated by oil or grease. NBR is good for applications where the oil seal requires resistance to lubrication oils， hydraulic fluids and grease. Nitrile oil seals are not suitable for use with brake oil， phosphoric ester and ester base.Colour: Black Operating temperature range: -20℃ to 90℃

The RS Pro oil seal typemetric nitrile double has 70mm internal diameter， 90mm outer diameter and 10mm thick. Nitrile is the most cost effective and commonly available oil seal material. Commonly used in driveshafts， crankshafts and hydraulic cylinders whererotating shaft is lubricated by oil or grease. NBR is good for applications where the oil seal requires resistance to lubrication oils， hydraulic fluids and grease. Nitrile oil seals are not suitable for use with brake oil， phosphoric ester and ester base.Colour: Black Operating temperature range: -20℃ to 90℃

The RS Pro oil seal typemetric nitrile double has 50mm internal diameter， 70mm outer diameter and 10mm thick. Nitrile is the most cost effective and commonly available oil seal material. Commonly used in driveshafts， crankshafts and hydraulic cylinders whererotating shaft is lubricated by oil or grease. NBR is good for applications where the oil seal requires resistance to lubrication oils， hydraulic fluids and grease. Nitrile oil seals are not suitable for use with brake oil， phosphoric ester and ester base.Colour: Black Operating temperature range: -20℃ to 90℃

The RS Pro oil seal typemetric nitrile double has 45mm internal diameter， 60mm outer diameter and 10mm thick. Nitrile is the most cost effective and commonly available oil seal material. Commonly used in driveshafts， crankshafts and hydraulic cylinders whererotating shaft is lubricated by oil or grease. NBR is good for applications where the oil seal requires resistance to lubrication oils， hydraulic fluids and grease. Nitrile oil seals are not suitable for use with brake oil， phosphoric ester and ester base.Colour: Black Operating temperature range: -20℃ to 90℃

The RS Pro oil seal typemetric nitrile double has 35mm internal diameter， 80mm outer diameter and 10mm thick. Nitrile is the most cost effective and commonly available oil seal material. Commonly used in driveshafts， crankshafts and hydraulic cylinders whererotating shaft is lubricated by oil or grease. NBR is good for applications where the oil seal requires resistance to lubrication oils， hydraulic fluids and grease. Nitrile oil seals are not suitable for use with brake oil， phosphoric ester and ester base.Colour: Black Operating temperature range: -20℃ to 90℃