「pit air」の検索結果

独自機構「エアータッチシステム」搭載!使い心地を徹底追及した、テープのりの新基準ピットエアー 安心の粘着力、のり切れ性能。 静かな場所でも音が気にならない。 ムラなくのり付け。 カンタンつめ替え式。

独自機構「エアータッチシステム」搭載!使い心地を徹底追及した、テープのりの新基準ピットエアー 安心の粘着力、のり切れ性能。 静かな場所でも音が気にならない。 ムラなくのり付け。 カンタンつめ替え式。

貼るタイプなら封筒ののり付けもスピーディー。 経済的な詰め替えタイプです。 強粘着

テープのり＜ドットライナー＞つめ替え用テープ。テープのり・ドットライナー簡易包装仕様の30個セットでまとめ買いにオススメです。 ドットライナー本体(タ-DM400-08)専用つめ替え用テープです。※本つめ替え用テープのみでのご使用はできません。 ※タ-DM400N-08にもつめ替えいただけます。

最後まで驚く程軽く引ける、テープのりの新基準。持ち運びに便利な携帯性と詰め替えて使える経済性を両立。

粒状になったのりを使用したドットタイプのテープのり。糸ひきがなく、ピタッとキレイに塗れます。 テープ状ののりなので、ベタつかず、乾く時間を待たずに接着でき、手やまわりも汚しません。もちろん紙がシワにならず、仕上がりもキレイ! 先端にローラーを採用。流れるような軽い引き心地と確実なのり付けで、作業がスムーズに進みます。 環境に配慮した非溶剤系のりを採用。ケースには再生樹脂を使用した、エコマーク取得商品です。 テープの後半になるほど引き心地が重くなる不満を改善した軽引き設計。

メーカー従来品と比べて1.5倍ののり厚で接着力は約20%UP!厚手の紙も素早くガッチリ接着できます。力が加わったときに特殊微粒子の働きで、引き終わりにのりが伸びることなくスパっとキレイに切れます。ブレてもキレイに全面転写できる「手ブレ補正機能」付き。強度を保つギリギリまでシェイプアップした形状だからのり付け箇所を確認しやすい!。持ち方を選ばず手になじんで使いやすいオーバル(だ円)ボディ。コンパクトサイズだから携帯時にもかさばりません。シンプル設計だから、テープのり初心者でもカンタンにつめ替えが可能。携帯時ヘッドを汚さないフルカバーキャップ。ボディの後ろに取り付ければさらに持ちやすさアップ!。のり自体の酸化による変色や貼り合わせた部分の酸化による変色がしにくいACID FREE。

貼るタイプなら封筒ののり付けもスピーディー。経済的な詰め替えタイプです。ピットテープMS専用詰め替えテープ。

簡単にのり着け作業ができる。

最後まで驚く程軽く引ける、テープのりの新基準。持ち運びに便利な携帯性と詰め替えて使える経済性を両立。

独自機構「エアータッチシステム」搭載 最後で、驚くほど軽く引ける

一定量の液体が送り出され、余分に出ないので液体が節約できます。 口が開いていないので液体が蒸発しません。 倒れても液体がこぼれにくくなっています。 頭部を軽く押すだけで液体が出ますので作業性がよくなります。 液体が飛ばない様、蓋を液体出口の上につけてあります。

口が開いていないので液体が蒸発しません。 軽く頭部を押すだけで一定量の液体が送り出され、余分に出ません。 倒れても液体がこぼれにくくなっています。 PH-500は、受け皿よりこぼれた液でまわりを汚さないため、ダブルの受け皿になっています。

一般紙から厚紙まで、速く、強力に接着できるスティックのり。 容器全部品・再生ポリプロピレン。 最後までのりを繰り出しても「のり受け」が外れ落ちないアンチドロップ機構。

OpenFit Airは、Shokzのコンセプトにあるオープンイヤーを継承した完全ワイヤレスイヤホンの最新モデルです。耳にぴったりフィットするイヤーフックは、超軽量で耳への負担も軽く、柔軟性のあるデザインになっています。安定性も高く長時間のリスニングにも快適です。10分の急速充電で約2時間、充電ケースを使うことで、最大約28時間使用可能です。IP54防水も備え、外出時も安心してお使いいただけます。

ゲーミンググレード2.4GHzステラワイヤレスまたはBluetooth接続 最大 800 時間のバッテリー寿命 単三電池1本または2本で使用可能 人間工学に基づいた形状、ダブルインジェクションラバーサイドグリップ付き 17種類のプログラム可能な入力端子 ROCCAT Titanオプティカルスイッチは1億回のクリックをテスト済み 19K DPI Owl-Eye オプティカルセンサー 熱処理された100%ピュアPTFEグライド

洗練されたエルゴノミック Kone 形状 。マルチボタンデザインと 4D ホイール、29 のプログラム可能な入力 。独自の低遅延 2.4GHz ワイヤレス接続と Bluetooth のデュアル接続 。RGB 搭載急速充電ドック同梱。最大 100 時間持続するバッテリー 。5 つのプログラム可能なゾーンを持つ 3D RGB AIMO ライティング 。Owl-Eye 19K DPI 光学式センサー 。TITAN Optical Switches による高い正確性と光学式の速度 。軽量で柔軟性の高い PhantomFlex USB-C 充電ケーブル 。熱処理ピュア PTFE グラ…

洗練されたエルゴノミック Kone 形状 。 マルチボタンデザインと 4D ホイール、29 のプログラム可能な入力 。 独自の低遅延 2.4GHz ワイヤレス接続と Bluetooth のデュアル接続 。 RGB 搭載急速充電ドック同梱。 最大 100 時間持続するバッテリー 。 5 つのプログラム可能なゾーンを持つ 3D RGB AIMO ライティング 。 Owl-Eye 19K DPI 光学式センサー 。 TITAN Optical Switches による高い正確性と光学式の速度 。 軽量で柔軟性の高い PhantomFlex USB-C 充電ケーブル 。 熱処理ピュア PTFE グラ…

一定量の液体が送り出され、余分に出ないので液体が節約できます。 口が開いていないので液体が蒸発しません。 倒れても液体がこぼれにくくなっています。 頭部を軽く押すだけで液体が出ますので作業性がよくなります。 液体が飛ばない様、蓋を液体出口の上につけてあります。

。Description。Need to keep track of the airflow in your data center or around your servers? How about making sure your HVAC and air control systems are functioning at full capacity? Well， the new SparkFun FS3000-1005 Air Velocity Sensor Breakout can help you with all that and more! It's super easy and super quick(Qwiic!)to hook up.。This breakout board is focused around Renesas' FS3000-1005， a surface-mount air velocity module with a range of 0-7.2m/s(0-16.2mph). It utilizes a MEMS thermopile-based sensor， features a digital output with 12-bit resolution and comprises a "solid" thermal isolation technology and silicon carbide coating to protect it from abrasive wear and water condensation.。We've written an Arduino library to help you get started quickly. You can download the library through the Arduino library manager by searching 'SparkFun Air Velocity' or you can get the GitHub repo as a .zip file and install the library from there.。The SparkFun Qwiic Connect System is an ecosystem of I2C sensors， actuators， shields and cables that make prototyping faster and less prone to error. All Qwiic-enabled boards use a common 1mm pitch， 4-pin JST connector. This reduces the amount of required PCB space， and polarized connections mean you can't hook it up wrong.。Get Started with the Qwiic Air Velocity Sensor Breakout。Features。I2C address：0x28。Air flow speed：0 - 7.23 m/sec(0 - 16.17mph)。Accuracy：5 % of full scale flow range。12-bit resolution。Input Voltage：2.7-3.3V。Average current draw：10mA

通気性、吸汗速乾性を兼ね備えた軽量のAIR PITを採用。生地全体に配された通気孔が通気性を高め衣服内を快適に保つ。 作業時などの汗をかくアクティブシーンにはもちろん、日常のリラックスシーンにももってこいのフーディ&ハーフカーゴパンツ

通気性、吸汗速乾性を兼ね備えた軽量のAIR PITを採用。生地全体に配された通気孔が通気性を高め衣服内を快適に保つ。 作業時などの汗をかくアクティブシーンにはもちろん、日常のリラックスシーンにももってこいのフーディ&ハーフカーゴパンツ

ポリウレタンコーディングしており、耐久性・滑り止め効果に優れています。 フィット感、通気性に優れています。 精密・弱電・一般機械の組立作業、検査工程に適した低発塵性の手袋です。

Description。Qwiic Boost increases the Qwiic bus from 3.3V to 5V while still providing the target device with 3.3V I2C signals. This is a handy board for connecting technologies that still require 5V for running higher voltage mechanisms(like a DC fan)but have an internal processor running at 3.3V. We've seen this a lot with air quality sensors that use a fan to push air into a test chamber.。The 5V boost circuit is rated up to 100mA with 90% efficiency. For applications where the 5V device needs 5V I2C signals， a conversion circuit is provided with the board. A jumper is available to select between 3.3V(default)and 5V I2C signals.。The SparkFun Qwiic Connect System is an ecosystem of I2C sensors， actuators， shields and cables that make prototyping faster and less prone to error. All Qwiic-enabled boards use a common 1mm pitch， 4-pin JST connector. This reduces the amount of required PCB space， and polarized connections mean you can't hook it up wrong.。Experimental Product：SparkX products are rapidly produced to bring you the most cutting edge technology as it becomes available. These products are tested but come with no guarantees. Live technical support is not available for SparkX products. Head on over to our forum for support or to ask a question.

Description。The SparkFun Qwiic Dual Solid State Relay is a power delivery board that allows users to switch two AC loads from a low power microcontroller using the SparkFun Qwiic connect system. The board features two 25A/250VAC solid state relays that utilize the Zero Cross Trigger method so you can toggle two loads on a 60Hz AC carrier signal on and off up to 120 times per second!。An ATTiny84 acts as the "brain" of the SparkFun Qwiic Dual Solid Relay to accept I2C commands to toggle the two relays as well as a few other special commands. The I2C address of the ATtiny84A is software configurable so， if you have a seriously big power project in mind， you could daisy chain over 100 Qwiic Dual Solid State Relays.。Messing with such high voltage is dangerous! We've included many safety precautions onto the PCB including ground isolation between the relay and other circuitry and a milled out area isolating each side of AC. However， with all the safety precautions included with the SparkFun Qwiic Dual Solid State Relay， this is still a power accessory for users who are experienced around， and knowledgeable about high AC voltage. If you're not comfortable with handling AC voltage in this way， you may want to check out the IoT Power Relay instead.。Note：The relays are rated for a max of 25A with forced air cooling. If you do not have forced air cooling， 10A max through the relays is recommended.。The SparkFun Qwiic connect system is an ecosystem of I2C sensors， actuators， shields and cables that make prototyping faster and less prone to error. All Qwiic-enabled boards use a common 1mm pitch， 4-pin JST connector. This reduces the amount of required PCB space， and polarized connections mean you can't hook it up wrong.。Get Started with the SparkFun Qwiic Dual Solid State Relay Guide。Features。Operating Voltage：2.5-3.6V(3.3V recommended)。I2C Address：0x0A(Default)0x0B(Alternate via jumper select)。Load Voltage Range：12-280VAC。Max Current(Through Relay)：25A(240VAC with forced air cooling)。Zero Cross Trigger。Normally Open Circuit Only。2x Qwiic Connector

Description。The SparkFun MicroMod Environmental Function Board adds additional sensing options to the MicroMod Processor Boards. This Function Board includes three sensors to monitor air quality(SGP40)， humidity temperature(SHTC3)， and CO2 concentrations(STC31)in your indoor environment. To make it even easier to use， all communication is over the MicroMod's I2C bus!。The SGP40 measures the quality of the air in your room or house. The SGP40 uses a metal oxide(MOx)sensor with a temperature controlled micro hotplate and provides a humidity-compensated volatile organic compound(VOC)based indoor air quality signal. Both the sensing element and VOC Algorithm feature an unmatched robustness against contaminating gases present in real world applications enabling a unique long term stability as well as low drift and device to device variation.。The SHTC3 is a highly accurate digital humidity and temperature sensor. The SHTC3 uses a capacitive humidity sensor with a relative humidity measurement range of 0 to 100% RH and bandgap temperature sensor with a temperature measurement range of -40℃ to 125℃. The SHTC3 builds on the success of their SHTC1 sensor with higher accuracy(±2% RH， ±0.2℃)than its predecessor， enabling greater flexibility.。The STC31 measures CO2 concentrations based on thermal conductivity and has two CO2 measurement ranges：0 to 25 vol%； and 0 to 100 vol%. The measurement repeatability is 0.2 vol%， with a stability of 0.025 vol% / ℃. The measurement accuracy depends on the measurement range：0.5 vol% + 3% measured value； 1 vol% + 3% measured value. Using measurements from the SHTC3， the STC31 is able to provide humidity-compensated measurements together with improved temperature compensation. The STC31 can compensate for atmospheric pressure too - which is handy if， like us， you're up in the mountains!。The outstanding performance of these three sensors is based on Sensirion's patented CMOSens(R)technology， which combines the sensor element， signal processing， and digital calibration on a small CMOS chip. The well-proven CMOS technology is perfectly suited for high-quality mass production and is the ideal choice for demanding and cost-sensitive OEM applications.。Utilizing our handy M.2 MicroMod connector， no soldering is required to connect it to your system. Simply match up the key on your processor and function board's beveled edge connector to their respective key on the M.2 connector， then secure them to the main board with screws. The MicroMod Environmental Function Board can then be read via the I2C port. The board is equipped with the AP2112 3.3V voltage regulator， I2C pull-up resistors， power LED， jumper to disable the LED， and jumpers for alternative STC31 addresses.。Note：A MicroMod Processor and Main Board are not included with this MicroMod Environmental Function Board. These boards will need to be purchased separately.。MicroMod is a modular interface ecosystem that connects a microcontroller "processor board" to various "carrier board" peripherals. Utilizing the M.2 standard， the MicroMod standard is designed to easily swap out processors and function boards on the fly. Pair a specialized carrier board for the project you need with your choice of compatible processor!。Get Started with the MicroMod Environmental Function Board。Features。Input voltage range。2.5V to 6.0V。Typ.。5V。via Main Board's USB connector。Typ.。～3.7V to 4.2V。via Main Board's LiPo battery Connector。I/O voltage。3.3V。AP2112 3.3V voltage regulator(rated 600mA)。Power LED。I2C pull-up resistors。Sensirion SGP40 Air Quality Sensor。Uses I2C interface。Address：0x59(default)。Operating voltage range。1.7V to 3.6V(Typ.。3.3V。)。Operating temperature range。-20℃ to +55℃。Typical current consumption。2.6mA。during continuous operation(at 3.3V)。34μA。when idle(heater off)。Output signal。Digital raw value(SRAW)：0 - 65535 ticks。Digital processed value(VOC Index)：0 - 500 VOC index points。Switch-on behavior。Time until reliably detecting VOC events：<60s。Time until specifications are met：<1h。Recommended sampling interval。VOC Index：1s。SRAW：0.5s - 10s(Typ. 1s)。Sensirion SHTC3 Humidity and Temperature Sensor。Uses I2C interface。Address：0x70(default， non-configurable)。Operating voltage range。1.62V - 3.6V(Typ.。3.3V。)。Operating temperature range。-40℃ to +125 ℃。Relative Humidity。Measurement range：0% to 100%。Typical accuracy：±2 %RH。Resolution：0.01 %RH。Temperature。Measurement range：-40℃ to +125 ℃。Typical accuracy：±0.2 ℃。Resolution：0.01 ℃。Typical current consumption(varies based on mode)。4.9μA to 430μA(Normal Mode)。0.5μA to 270μA(Low Power Mode)。Allows the STC31 to compensate for humidity and temperature。Sensirion STC31 CO2 Sensor。Uses I2C interface。Addresses：0x29(default)。， 0x2A， 0x2B， 0x2C。Operating voltage range。2.7V to 5.5V(Typ.。3.3V。)。Operating temperature range。-20 ℃ to +85 ℃。Calibrated for CO2 in N2 and CO2 in air。Measurement ranges。0 to 25 vol% in N2。0 to 100 vol% in air。Accuracy。0.5 vol% + 3% measured value in N2。1 vol% + 3% measured value in air。Concentration and temperature resolution：16-bit。Repeatability：0.2 vol%。Temperature stability：0.025 vol% / ℃。Start-up time：14 ms。Thermal conductivity sensor provides calibrated gas concentration and temperature output。Jumpers。PWR LED。I2C pull-up resistors。STC31 address selection。Note：The I2C addresses that are reserved for each sensor is 0x59(SGP40)， 0x70(SHTC3)， 0x29(STC31). A multiplexer/Mux is required to communicate to multiple SHTC3 sensors on a single bus. The SHTC3 uses the same address as the Qwiic Mux(0x70). For advanced users that are using multiple SHTC3's with the Qwiic Mux， you will need to adjust the Qwiic Mux's default address.

エルボアダプタ - オステーパー / 平行. This range of RS PRO elbow connector is an ideal choice when you need to reliably link up sections of pipe or tubing and its design offers both screw-on and push-on connection. Both the push-in adapter and the precise male screw thread provide a secure connection that allows air or fluid to flow between sections. The fitting's wide operating temperature range of -18oC to +70℃ makes it a versatile component that will suit many industrial environments and applications. This elbow connector has been tested extensively to meet RS PRO's strict standards for safety and quality. Features and Benefits. Operating Temperature Range -18 to +70℃ Operating Pressure of -1 to 15 bar. Applications. The push-on and screw collar design of these fittings makes them secure and suitable for instrumentation， vacuum and general-purpose applications， and they can be used with nylon or polyurethane tubing. Why RS PRO.. RS PRO is our own brand range and brings you a wide range of high-quality， great value products offering you more choice. Trusted by engineers all over the world， every part of every RS PRO product has been rigorously tested against demanding industry standards they ’re only given the RS PRO Seal of Approval if we ’re confident of their exceptional quality， which means you can be confident too.

エルボアダプタ - オステーパー / 平行. This range of RS PRO elbow connector is an ideal choice when you need to reliably link up sections of pipe or tubing and its design offers both screw-on and push-on connection. Both the push-in adapter and the precise male screw thread provide a secure connection that allows air or fluid to flow between sections. The fitting's wide operating temperature range of -18oC to +70℃ makes it a versatile component that will suit many industrial environments and applications. This elbow connector has been tested extensively to meet RS PRO's strict standards for safety and quality. Features and Benefits. Operating Temperature Range -18 to +70℃ Operating Pressure of -1 to 15 bar. Applications. The push-on and screw collar design of these fittings makes them secure and suitable for instrumentation， vacuum and general-purpose applications， and they can be used with nylon or polyurethane tubing. Why RS PRO.. RS PRO is our own brand range and brings you a wide range of high-quality， great value products offering you more choice. Trusted by engineers all over the world， every part of every RS PRO product has been rigorously tested against demanding industry standards they ’re only given the RS PRO Seal of Approval if we ’re confident of their exceptional quality， which means you can be confident too.

エルボアダプタ - オステーパー / 平行. This range of RS PRO elbow connector is an ideal choice when you need to reliably link up sections of pipe or tubing and its design offers both screw-on and push-on connection. Both the push-in adapter and the precise male screw thread provide a secure connection that allows air or fluid to flow between sections. The fitting's wide operating temperature range of -18oC to +70℃ makes it a versatile component that will suit many industrial environments and applications. This elbow connector has been tested extensively to meet RS PRO's strict standards for safety and quality. Features and Benefits. Operating Temperature Range -18 to +70℃ Operating Pressure of -1 to 15 bar. Applications. The push-on and screw collar design of these fittings makes them secure and suitable for instrumentation， vacuum and general-purpose applications， and they can be used with nylon or polyurethane tubing. Why RS PRO.. RS PRO is our own brand range and brings you a wide range of high-quality， great value products offering you more choice. Trusted by engineers all over the world， every part of every RS PRO product has been rigorously tested against demanding industry standards they ’re only given the RS PRO Seal of Approval if we ’re confident of their exceptional quality， which means you can be confident too.

エルボアダプタ - オステーパー / 平行. This range of RS PRO elbow connector is an ideal choice when you need to reliably link up sections of pipe or tubing and its design offers both screw-on and push-on connection. Both the push-in adapter and the precise male screw thread provide a secure connection that allows air or fluid to flow between sections. The fitting's wide operating temperature range of -18oC to +70℃ makes it a versatile component that will suit many industrial environments and applications. This elbow connector has been tested extensively to meet RS PRO's strict standards for safety and quality. Features and Benefits. Operating Temperature Range -18 to +70℃ Operating Pressure of -1 to 15 bar. Applications. The push-on and screw collar design of these fittings makes them secure and suitable for instrumentation， vacuum and general-purpose applications， and they can be used with nylon or polyurethane tubing. Why RS PRO.. RS PRO is our own brand range and brings you a wide range of high-quality， great value products offering you more choice. Trusted by engineers all over the world， every part of every RS PRO product has been rigorously tested against demanding industry standards they ’re only given the RS PRO Seal of Approval if we ’re confident of their exceptional quality， which means you can be confident too.

エルボアダプタ - オステーパー / 平行. This range of RS PRO elbow connector is an ideal choice when you need to reliably link up sections of pipe or tubing and its design offers both screw-on and push-on connection. Both the push-in adapter and the precise male screw thread provide a secure connection that allows air or fluid to flow between sections. The fitting's wide operating temperature range of -18oC to +70℃ makes it a versatile component that will suit many industrial environments and applications. This elbow connector has been tested extensively to meet RS PRO's strict standards for safety and quality. Features and Benefits. Operating Temperature Range -18 to +70℃ Operating Pressure of -1 to 15 bar. Applications. The push-on and screw collar design of these fittings makes them secure and suitable for instrumentation， vacuum and general-purpose applications， and they can be used with nylon or polyurethane tubing. Why RS PRO.. RS PRO is our own brand range and brings you a wide range of high-quality， great value products offering you more choice. Trusted by engineers all over the world， every part of every RS PRO product has been rigorously tested against demanding industry standards they ’re only given the RS PRO Seal of Approval if we ’re confident of their exceptional quality， which means you can be confident too.