「grease gun」の検索結果

狭い所でも確実に作業ができます。レバーでグリースの吐出量が調整できます。グリースの充てんが簡単に行えます。 チェーンの硬さを改善し、引っ張りやすくなりました。

狭い所でも確実に作業ができます。 ハイドロリックニップル用

420mLカートリッジ(蛇腹タイプ)専用のレバータイプハンドグリースガンです。 カートリッジのセットは簡単でスピーディに行え、手を汚すことがなく、グリースへのゴミ・砂等の混入の心配もありません。 各種のノズル・マイクロホースが使用できます。

400gのカートリッジ、または手詰め500gのどちらでも使用できます。海外製筒型カートリッジグリス・手詰め兼用です。

片手・両手兼用手詰めタイプです。

手詰め・カートリッジグリース兼用タイプのグリースガンです。片手で操作が出来るので狭い場所での注油作業に最適です。 ストレートノズルとフレキシブルホースの2種類が付いているので、いろいろな場所への注油が可能です。カートリッジグリース80gを使えば、装着簡単で手が汚れません。

エア専用です。 ガンが360度回転するため場所に応じて角度調整できます。 グリスの連続吐出が可能なので大量のグリスアップに最適です。 グリスはカートリッジ専用です。

グリスアップ箇所が多い場所や高所・狭所での作業効率が上がるエアー式ハンドグリスガンです。連続吐出も可能です。 ジャバラカートリッジ・手詰めの両用の2ウェイタイプ。ロックを解除すればグリップ部が360°回転するので便利です。

注油しづらい場所に給油口がある場合に便利です。

グリースの充てんが楽なカートリッジ式で、グリースの節約にもなります。

極細ニードル。

手詰めとEA991C-9、-10カートリッジ使用可能。

かみ込み式カプラー(3枚爪など)に取りつけられます。 ピンタイプ用。

工場内でエア・ソースがない場所で、工作機械等あらゆる機械のグリス給油が手軽にできます。 取り扱いは簡単で、吐出圧力も高く、メンテナンス作業に最適なグリスルブリケーターです。

リチウムイオンバッテリー搭載の電動式グリスガンです。電源、エアーソースのない現場において建築現場、高所等のグリスアップに最適です。手軽に持ち運べ、スイッチ操作で連続してグリスアップが行えます。400ccカートリッジグリス専用です。建築現場、高所等のグリスアップに最適です。

高圧/高吐量両用手詰めタイプです。

。Festo Double-Acting Pneumatic Guided Cylinder， 80 mm Bore， 125 mm Stroke - DFM Series - DFM-80-125-P-A-GF This actuator from Festo combines the functions of a guide and a drive in one compact unit。Its typically used for clamping， lifting and stopping tasks in factory automation setups。Thanks to its large-diameter guide rods and four plain-bearing bushes， the unit offers high rigidity。It absorbs torsion and shear stresses with ease， so you can use it for intensive applications。A choice of multiple supply ports means its easy to install and maintain. Fast installation saves you time and effort High resistance to torque and lateral forces for use in heavy-duty applications Wide range of mounting options for added versatility Application Information Conveyor and assembly systems Manufacturing units Electrical sectorFesto の DFM シリーズのガイド付きアクチュエータは、柔軟なクッションプレートを備えていて、操作中のノイズを軽減し、サービス寿命を延ばします。アクチュエータ本体の一体型スロットにより、近接センサを組み込んでピストンの直線運動を測定できます。ピストン径は 80 mm で、ストローク長は 125 mm で、任意の位置で組み立てられます。 Does this unit need external cushioning 周囲温度： -20 → 80 ℃ 作業荷重からヨークプレートまでの重心距離 125 mmThis guided actuator is fitted with flexible cushioning rings or plates at both ends to reduce stress and damage due to impact forces。What type of seals does this unit use This guided actuator is fitted with NBR (nitrile butadiene rubber) seals， which offer good resistance to abrasion and compression。The seals can also withstand contact with petroleum oils， as well as common lubricants and greases， without degrading.

Description。The SparkFun TFT LCD Breakout is a versatile， colorful， and easy way to experiment with graphics or create a user interface for your project. With a 4-wire SPI interface and microSD card holder， you can use this breakout to easily add visual display/interface capabilities to a project as well as providing all the storage you might need for multimedia files.。To get started with this breakout， you will need an Arduino compatible microcontroller of your choice - we recommend something with extra RAM like the SparkFun Thing Plus. The breakout can be powered with either 5V or 3.3V. The microSD card holder is connected to the same SPI bus as the display which keeps the required pin count low and exists to relieve the burden from your microcontroller's poor memory due to having to store hundreds of images of cats， or really whatever you want to keep there. We have also gone ahead and tricked out the SparkFun HyperDisplay library with a driver made especially for this breakout!。Out of the box， the SparkFun TFT LCD Breakout will come with a large backing PCB that makes it easy to securely mount the display in a project. If you need a more flexible solution you can remove the display module， snap off half the backing board， and then re-insert the display module. When this is done you'll be left with the bare minimum frame around the display to more seamLessly integrate with your project.。Get Started With the SparkFun TFT LCD Breakout Guide。Features。128×160 RGB pixels。Up to 18 bit configurable color depth。2x PWM controllabele LED backlight。microSD Card Slot。V-Score for Minimal Footprint Setup

。Description。The SparkFun ESP8266 Thing Starter Kit is a great place to start learning about the Internet of Things(IoT)! Inside this kit you will find a ESP8266 Thing， a Serial Basic Breakout to program it(and USB cable)， jumper wires， breadboard， LEDs， and plenty of headers. We've also included a pair of stackable 10-pin headers as well as 40 regular headers to connect your Serial Basic Breakout to the Thing or breadboard. If you have ever been interested in learning about IoT， Arduino， and wireless solutions， the SparkFun ESP8266 Thing Starter Kit is a perfect place to start!。The SparkFun ESP8266 Thing is a breakout and development board for the ESP8266 WiFi SoC - a leading platform for Internet of Things(IoT)or WiFi-related projects. The Thing is low-cost and easy to use， and Arduino IDE integration can be achieved in just a few steps. We've made the ESP8266 easy to use by breaking out all of the module's pins， adding a LiPo charger， power supply， and all of the other supporting circuitry it requires.。Why the name? We lovingly call it the "Thing" due to it being the perfect foundation for your Internet of Things project. The Thing does everything from turning on an LED to posting data with datastream， and can be programmed just like any microcontroller. You can even program the Thing through the Arduino IDE by installing the ESP8266 Arduino addon.。Note：You may want to either use a second USB cable to power the board while programming or connect the solder jumper on the back of the board to provide power over the FTDI port.。Get Started with the SparkFun ESP8266 Thing Guide。Features。All module pins broken out。On-board LiPo charger/power supply。802.11 b/g/n。Wi-Fi Direct(P2P)， soft-AP。Integrated TCP/IP protocol stack。Integrated TR switch， balun， LNA， power amplifier and matching network。Integrated PLLs， regulators， DCXO and power management units。Integrated low power 32-bit CPU could be used as application processor。+19.5dBm output power in 802.11b mode

。Description。Passive Infrared(PIR)sensors are great for detecting motion in a small area around the sensor. The 170μA SparkFun EKMC4607112K PIR Breakout is a simple board equipped with an EKM-series PIR sensor from Panasonic(R). The EKM-series PIR sensors are optimized for small movements to offer motion-sensing options for continuously powered applications.。PIR sensors do not return specific distance data but instead monitor for IR light coming from objects in their field of view and will activate their signal when motion is detected in their sensing area， making them perfect for applications such as turning devices on automatically when motion is detected. Applications include home and building automation for energy saving， automated on/off lighting control， security， appliances， and IoT.。Panasonic's low-profile PIR motion sensors(10.9mm versus standard 14.4mm height offer space savings for constrained designs)consist of a lens to create various detection zones， an optical filter to block non-infrared light， pyroelectric sensing elements， electromagnetic shielding to all circuitry， and an impedance converter to get an electrical signal. This PIR sensor offers digital output across 32 zones at 5m detection distance with 90°×90° detection area.。Note：The sensitivity of passive infrared sensors is influenced by environmental conditions， so a performance evaluation test under representative conditions is recommended.。Get Started with the SparkFun PIR Breakout Guide。Features。Operating Voltage：2.3。-。4.0V。170 μA。standby current consumption。Lens diameter - 10.4mm。Lens Height - 10.9mm。5m detection distance。90°×90°(±45°)detection area