「active unit」の検索結果

細かなネジ・釘等の部品収納に便利です。「ベルトフック付きミニケース」はナチュラルカラーで中身の確認ができます。また、取り外しができ、腰のベルトに取付ができます。ハンドル左脇にはΦ径目盛、右脇には取り外しが可能なビットホルダーがついています。

細かなネジ・釘等の部品収納に便利です。「ベルトフック付きミニケース」はナチュラルカラーで中身の確認ができます。また、取り外しができ、腰のベルトに取付ができます。ハンドル左脇にはΦ径目盛、右脇には取り外しが可能なビットホルダーがついています。

釘、ネジなどをベルトに通して携帯できるケースが14個付いています。

腰のベルトに取付ができます。ナチュラルカラーで、中身の確認ができます。細かいネジ・釘等の部品収納や、ホビー釣り用品の収納など、趣味に合わせて幅広く活用できるケースです。

腰のベルトに取付ができます。ナチュラルカラーで、中身の確認ができます。細かいネジ・釘等の部品収納や、ホビー釣り用品の収納など、趣味に合わせて幅広く活用できるケースです。ワイドタイプで125mmの釘も収納可能です。

細かなネジ・釘等の部品収納に便利です。「ベルトフック付きミニケース」はナチュラルカラーで中身の確認ができます。また、取り外しができ、腰のベルトに取付ができます。ハンドル左脇にはΦ径目盛、右脇には取り外しが可能なビットホルダーがついています。

ウエストケースを収納・持ち運び出来るユニットケースです。 ネジ・釘類などのパーツをベルトに通して携帯できるウエストケースが付いています。 パーツの仕分けが出来るだけでなく、ウエストケースはそのまま腰に着けて作業が可能です。 ウエストケースは外開き式なので、蓋を開けたまま作業が続けられます。 用途に応じてケースの入れ替えることで、最適なパーツラインナップで作業が出来ます。

工具もパーツも自由自在に収納・整理・携帯できる。透明小箱は中身を入れたまま、用途に応じて収納・保管・入れ替えできる。透明小箱は外箱ケース底部仕切りで位置を固定され、動かない。フタが引っ掛かったりして、不用意に開かないロック機構。頑丈で手にしっくり馴染むグリップ形状

ご意見の多かったフタの爪部と取っ手部の強度を改善しました。しっかりとした作りで、保管はもちろん持ち運びにも便利です。

ベルトに装着してネジや釘を携帯できるパーツケースです。 ウエストケースは外開き式なので、蓋を開けたまま作業が続けられます。 別売りのユニットケースUC-9に9個収納できます。

フタの爪部が内側を向いており、保管物が飛び出す心配はありません。取り外し可能なケースが16個付いています。

ベルトに取り付けて持ち運びできるウエストケースです。 別売りのベルトホールドケースボックス(HL3049-C・HL3049-D)に収納できます。

収納性、利便性、使いやすさを考えた小物収納ケースです。 持ち易いボディ型ハンドル。 蝶番、バックルはオール別部品を使用。耐久性抜群!

細かなネジ・釘等の部品収納に便利です。「ベルトフック付きミニケース」はナチュラルカラーで中身の確認ができます。また、取り外しができ、腰のベルトに取付ができます。ハンドル左脇にはΦ径目盛、右脇には取り外しが可能なビットホルダーがついています。

ケースのないパーツボックス。使いやすいミニタイプ。 外枠に透明中箱がセットされているので、中身が一目瞭然 外枠は2分割でき、脱着も簡単で整理・保管・携帯に便利! スケルトン小箱は、パーツを入れたままスケルトンパーツボックスや棚に整理保管でき、使用時はベルト等に吊れる スケルトン小箱は透明フタ付。 パーツ等の出入れの際、フタをなくしたり、落したりする心配がない

コンパクトで使いやすいミニタイプです。釘、ネジなどをベルトに通して携帯できるケースが6個付いています。

パーツボックスの4面使用可能タイプです。 仕切板を自由に動かし、保管物の大きさに合わせることが出来ます。

腰のベルトに取付ができます。クリアで、中身の確認ができます。細かいネジ・釘等の部品収納や、ホビー釣り用品の収納など、趣味に合わせて幅広く活用できるケースです。

彩り豊かにパーツの整理。 部品の移動を防ぐ丈夫なクッション 取り出しやすいアール加工

Description。If you're looking for a fully-featured Raspberry Pi 4 case， then look no further than the Argon ONE Pi 4 Raspberry Pi Case. In addition to providing passive and active cooling to keep the Pi 4 running cool， it incorporates multiple pieces to allow for access to different levels of the board like a magnetic dedicated door for the 40 pin connector that provides pin numbers and labels. An included fan HAT provides software controllable， active cooling while the aluminum enclosure provides passive cooling through two extrusions that provide a heat sink for the ICs on board(thermal tape included). An additional interface board plugs into the Pi and redirects all the connectors(outside of the 40 pin)to the one side of the enclosure. But probably the best feature is a properly configured power button that provides the ability to safely shutdown， reboot， or force shutdown the Pi.。Features。Passive and active Cooling。All connectors positioned to one side of the enclosure。Magnetic door provides access to the 40 pin header without exposing the board。Aluminum enclosure with plastic base。Power button for safe power cycling

Description。The BitZero from Carbide 3D is a small accessory piece for your Shapeoko CNC machine meant to assist in finding the edges， or datums of the part you are milling. This part is an active probe， and when contacted to ground， communicates its p

。Festo Double-Acting Pneumatic Guided Cylinder， 80 mm Bore， 125 mm Stroke - DFM Series - DFM-80-125-P-A-GF This actuator from Festo combines the functions of a guide and a drive in one compact unit。Its typically used for clamping， lifting and stopping tasks in factory automation setups。Thanks to its large-diameter guide rods and four plain-bearing bushes， the unit offers high rigidity。It absorbs torsion and shear stresses with ease， so you can use it for intensive applications。A choice of multiple supply ports means its easy to install and maintain. Fast installation saves you time and effort High resistance to torque and lateral forces for use in heavy-duty applications Wide range of mounting options for added versatility Application Information Conveyor and assembly systems Manufacturing units Electrical sectorFesto の DFM シリーズのガイド付きアクチュエータは、柔軟なクッションプレートを備えていて、操作中のノイズを軽減し、サービス寿命を延ばします。アクチュエータ本体の一体型スロットにより、近接センサを組み込んでピストンの直線運動を測定できます。ピストン径は 80 mm で、ストローク長は 125 mm で、任意の位置で組み立てられます。 Does this unit need external cushioning 周囲温度： -20 → 80 ℃ 作業荷重からヨークプレートまでの重心距離 125 mmThis guided actuator is fitted with flexible cushioning rings or plates at both ends to reduce stress and damage due to impact forces。What type of seals does this unit use This guided actuator is fitted with NBR (nitrile butadiene rubber) seals， which offer good resistance to abrasion and compression。The seals can also withstand contact with petroleum oils， as well as common lubricants and greases， without degrading.

Festo Pneumatic Roundline Cylinder， 10 mm Bore， 10 mm Stroke， Double-Acting - DSNU Series - DSNU-10-10-P-A This roundline cylinder from Festo provides linear motion in automation systems。Its well-suited for pick-and-place and open/close functions for small loads at low speeds。Both the rod and barrel are constructed from high-alloy stainless steel， so you can be confident of a long service life。Elastomer cushioning on either end quickly and effectively reduces impact forces when the cylinder rod reaches the end position。Because its a double-acting cylinder， you can use it with machinery that needs more than one movement。This also lets it extend and retract without needing a spring. No adjustment needed for cushioning Flexible installation options Wide operating temperature range of -20℃ to +80℃， for use in tough industrial settings Supplied with standard M5 pneumatic connections， so its easy to fit into modular systems Application Information Construction sector Manufacturing Food processing linesFesto 規格ベースのシリンダは近接検出に使用し、フレキシブルなクッションリングで両端を調整できます。追加取り付け部品の有無にかかわらず、さまざまな取り付けオプションがあります。ピストンロッドねじは M4 で、ストロークサイズは 10 mm です。 What cover material is used in this unit 周囲温度： -20 → 80 ℃ シリンダバレルに使用される高合金鋼材料This unit uses plain anodised wrought aluminium alloy， which is lightweight and moderately corrosion-resistant。Can this cylinder be used for position sensing Yes， the piston rod is magnetic， so it can be used for position-sensing.

SKF Ball Bearing， 190 mm ID， 260 mm OD - 61938 MA This SKF deep-groove ball bearing is designed to maintain low levels of friction， even when its working at high rotational speeds。This prevents it from overheating， improves power efficiency and means your machinery will have lower maintenance needs。It also leads to less wear and tear on the bearing itself， which improves its working life。True to SKFs high standards， this unit is engineered to offer precision operation and reliable performance in demanding working environments. Open end， cylindrical bore type Deep-groove design for low friction torque Low noise and vibration Inside diameter of 190 mm Outside diameter of 260 mm Race width of 33 mm Application Information Food and beverage industry Automotive manufacturing Wind power generation Mining and mineral industriesSKF 深溝ボールベアリングは、特に汎用性が高い製品です。高速及び超高速に適しており、両方向のラジアル荷重とアキシャル荷重に対応し、メンテナンスはほとんど必要ありません。深溝ボールベアリングは、最も広く使用されているベアリングタイプなので、SFKではさまざまなデザイン、タイプ、及びサイズを用意しています。内径 190 mm、外径 260 mm となっています。 What is this bearing made from ベアリングはスチール製です 円筒穴タイプThis SKF bearing is manufactured from steel with a machined brass cage。Both metals are extremely strong， while brass gives the unit a high temperature tolerance。This makes it suitable for use in hot environments and able to withstand the corrosive properties of water and abrasive chemicals.

Description。Robots are fun， and Arduinos are easy. So wouldn't it be nice if there were kit that included everything you need to get your Arduino device set up to control simple two-motor-circuit buddy? The SparkFun Ardumoto Shield Kit is perfect for any robot enthusiast and includes an Ardumoto Shield， as well as pairs of tires， motors， connectors and wires. And， of course， it's all stuffed in classic SparkFun red box(which may come in handy as robot chassis).。The Ardumoto Shield is an easy-to-use dual-motor controller for Arduino. Combined with an Arduino， the Ardumoto makes fantastic controller platform for RC vehicles or even small autonomous robots. At the heart of the Ardumoto --- the big， black chip right in the middle --- is an L298， one of our favorite dual-channel motor drivers around， capable of driving up to 2A per channel. The board takes its power from the same Vin line as the Arduino board and includes blue and yellow LEDs to indicate active direction. All driver lines are diode protected from back EMF.。Note：The motors included with this kit are not compatible with the Wheel Encoder kit. Sorry for the inconvenience.。Get Started with the SparkFun Ardumoto Kit Guide

SKF Bearing Lock Nut And Locking Device - KMT 5 If you need to secure a bearing to a shaft on your equipment， choose this lock nut from SKF。When tightened to the recommended torque， this unit provides enough friction between the ends of its pins and the shaft thread to hold a bearing firmly in place。This makes it a good choice for machinery that operates at high vibration levels or high rotational speeds。It also makes installation quicker and simpler as theres no separate locking device to worry about。As the component is reusable， its a long-lasting choice. Axial static load carrying capacity of 130 kN Mass of 0.14 kg Locking screw size of M6 Recommended tightening torque of 8 Nm Application Information Wind power generation Automotive manufacturing PrintingSKF ロックナット及びロック装置は、ベアリングを補完するために必要です。SKF では、アダプタスリーブ、回収スリーブ、ロックナットなど、幅広いベアリングアクセサリを用意しています。 What are the advantages of lock nuts with locking pins 高品質Lock nuts with locking pins are adjustable and can accommodate high axial loads。Theyre also simple to install and remove as needed。What are some of the common uses of lock nuts Lock nuts are frequently used to secure gears， belt pulleys and other machine components.

SKF Spherical Roller Bearing， 140 mm ID， 250 mm OD - 22228 CC/C3W33 This spherical roller bearing from SKF is a self-adjusting unit that effectively accommodates shaft misalignment。It delivers even load distribution and has a very high load-carrying capacity for heavy-duty applications。Its innovative self-guiding rollers keep friction and heat at low levels， so your equipment can operate efficiently。This lack of friction also reduces wear on the bearing， ensuring a long lifespan。Thanks to its steel construction， its highly durable and resistant to corrosion， so its suitable for use in harsh environments。A bearing like this is used in applications with heavy radial and axial loads in either direction. Suitable to use with compact machinery as its simple to mount in tight spaces Substantial fatigue load limit of 86.5 kN Supplied as a non-separable bearing for simple and time-saving installation Reduced maintenance and service costs due to low consumption of lubrication Application Information Wind power generation Medical and pharmaceutical manufacturing Off-shore drilling Pump manufacturingSKF 球面ローラーベアリングには、2 列の対称ローラー、共通スフィンベアリング外輪軌道、ベアリング軸に対して傾斜する 2 つの内輪軌道があります。外輪軌道の球の中心点は、ベアリング軸にあります。内径 140 mm、外径 250 mm です。 Does this bearing need maintenance ベアリングはスチール製です 円筒穴タイプThe bearing is wear-resistant and wont need frequent maintenance or replacement。It has three lubrication holes on the outer ring for simple re-greasing when necessary.

SKF Ball Bearing， 130 mm ID， 230 mm OD - 7226 BCBM Need a durable bearing thats able to accommodate a combined radial and axial load This angular contact bearing from SKF has inner and outer raceways that are displaced relative to each other in the direction of the bearing axis。This means it can safely handle the pressure from simultaneous loads。As this unit is a low-friction option， it offers a long service life and operates at a low temperature。It meets both British and EU electrostatic discharge standards， you can be sure it wont cause damage to equipment through accidental electrostatic discharge。This type of bearing is commonly used throughout heavy and light industries and can be found in everything from gearboxes to pumps and electric motors. Open end type Inside diameter of 130 mm Outside diameter of 230 mm Race width of 40 mm Nominal contact angle of 40 Application Information Machine tooling Steel mills Wind energy industry， including turbinesSKF アングルコンタクトボールベアリングは、内面が 130 mm、外輪軌道が 230 mm で、ベアリング軸方向に相対的に配置されます。このベアリングは、複合荷重(ラジアル荷重とアキシャル荷重を同時に処理)に対応するように設計されています。 アングルコンタクトボールベアリングの軸方向の積載荷重は、コンタクト角度が大きくなると増加します。接触角度は、ボールの接触点とラジアル平面の軌道を結合する線との間の角度で定義されます。この角度に沿って、結合荷重がある軌道から別の軌道に伝達され、ベアリング軸に垂直な線が伝達されます。 When should I use an angular contact bearing 1列 円筒形タイプの穴 スチール製ベアリング 公称接触角： 40 °Angular contact bearings are ideal for use in machinery that demands a high level of accuracy and durability。Theyre commonly used in machine tool spindles， vacuum pumps and centrifuges.

。SKF Ball Bearing - 100 mm ID， 215 mm OD - 7320 BEGAF Use this angular contact ball bearing from SKF when you need to support a high axial load。In this unit， the inner and outer raceways are displaced relative to each other in the direction of the bearing axis， which allows it to endure a combined radial and axial load。The bearings ability to carry axial load gets higher as the contact angle of the axial load increases， which makes it a resilient option。This bearing has a versatile race width of 47 mm and is ideal for use with high-speed machinery. Open end type， so it can be greased as needed Single-row design offers a range of uses and offers a long service life Cylindrical bore type， for ease of installation Can be used at higher operational speeds than other types of bearing Application Information Wind turbines Industrial pumps Gearboxes， electric motors and clutches in carsSKF アングルコンタクトボールベアリングは、ベアリング軸の方向に相対的に配置される 100 mm の内輪及び 215 mm の外輪軌道を備えています。つまり、このベアリングは、荷重の組み合わせ(ラジアルとアキシャルの負荷を同時に処理)に対応するように設計されています。 アングルコンタクトボールベアリングの軸方向の積載荷重は、コンタクト角度が大きくなると増加します。接触角度は、ボールの接触点とラジアル平面の軌道を結合する線との間の角度で定義されます。この角度に沿って、結合荷重がある軌道から別の軌道に伝達され、ベアリング軸に垂直な線が伝達されます。 Are angular contact bearings noisy 1 列設計 円筒穴タイプ スチール製ベアリングNo， theyre actually very quiet in operation。Because angular contact bearings compensate internally for angular misalignment and can accommodate axial shaft expansion， theyre able to run quietly and coolly， with a minimal amount of friction.

SKF Ball Bearing， 120 mm ID， 215 mm OD - 7224 BCBM Need a ball bearing to accommodate a combined radial and axial load This reliable single-row angular contact ball bearing from SKF has raceways that are displaced relative to each other in the direction of the bearing axis。As the contact angle increases， so does the axial load-carrying capacity of the bearing。As its made from steel， this unit is durable and resists corrosion， so it can be used in demanding environments。Bearings of this type are commonly used for material handling and in the wind energy industry. Small size for compact applications Smooth running properties for rapid acceleration and deceleration Standard design for easy mounting Application Information Agricultural equipment Food manufacturing Electric motors Machine tools Steel millingSKF アングルコンタクトボールベアリングは、内側が 120 mm で、外側が 215 mm のリング軌道を備えており、ベアリング軸の方向に相対的に配置されています。このベアリングは、複合荷重(ラジアル荷重とアキシャル荷重を同時に処理)に対応するように設計されています。 アングルコンタクトボールベアリングの軸方向の積載荷重は、コンタクト角度が大きくなると増加します。接触角度は、ボールの接触点とラジアル平面の軌道を結合する線との間の角度で定義されます。この角度に沿って、結合荷重がある軌道から別の軌道に伝達され、ベアリング軸に垂直な線が伝達されます。 What kind of loads can this type of angular contact bearing support 1列 円筒形タイプの穴 スチール製ベアリング 公称接触角： 40 °Angular contact bearings from SKF are able to support heavy axial loads in one direction as well as moderate radial loads。Why are angular contact bearings often fitted in pairs Angular contacts bearings are usually installed in pairs and adjusted against each other to provide maximum stability。The two bearings can be arranged back-to-back or face-to-face to accommodate axial loads in both directions， or in tandem to accommodate a greater axial load in one direction only.

Description。The FLIR Lepton(R)2.5 - Thermal Imaging Module is a radiometric-capable long wave infrared(LWIR)camera solution that is smaller than a dime， fits inside a smartphone， and is less expensive than traditional IR cameras. With a focal plane array of 80x60 active pixels， this Lepton easily integrates into native mobile-devices and other electronics as an IR sensor or thermal image sensor. The radiometric Lepton captures accurate， calibrated， and non-contact temperature data in every pixel.。For large quantities：We currently have a limit of one per customer order on the FLIR Lepton 2.5 module due to supply chain issues as a result of COVID-19. If you need to place a distributor order please contact your sales rep and they will assist you. For bulk order for this module please visit our Volume Pricing Page for inquiries of stock. At this time， we cannot guarantee orders for this module but we will do what we can to work with you in fulfilling your request.。Features。Effective Frame Rate：8.6 Hz(commercial application exportable)。Input Clock：25-MHz nominal， CMOS IO Voltage Levels。Output Format：User-selectable 14-bit， 8-bit(AGC applied)， or 24-bit RGB(AGC and colorization applied)。Pixel Size：17 μm。Radiometric Accuracy：High gain：Greater of +/- 5℃ or 5%(typical)Low gain：Greater of +/- 10℃ or 10%(typical)。Scene Dynamic Range：-10-140 ℃(high gain)； up to 450℃(low gain)typical。Spectral Range：Longwave infrared， 8 μm to 14 μm。Temperature Compensation：Automatic. Output image independent of camera temperature.。Thermal Sensitivity：<50 mK(0.050° C)。Video Data Interface：Video over SPI。Control Port：CCI(I2C-like)， CMOS IO Voltage Levels。Package Dimensions - Socket Version(w×l×h)：11.8×12.7×7.2 mm。Mechanical Interface：32-pin socket interface to standard Molex(R)socket。Non-Operating Temperature Range：-40 ℃ to +80 ℃。Optimum Temperature Range：-10℃ to +80℃。Shock：1500 G @ 0.4 ms。Array format：80×60， progressive scan。FOV - Diagonal：63.5°。FOV - Horizontal：50°(nominal)。Image Optimization：Factory configured and fully automated。Non-Uniformity Correction(NUC)：Automatic with shutter。Sensor Technology：Uncooled VOx microbolometer。Solar protection：Integral。Input Supply Voltage：2.8 V， 1.2 V， 2.5 V to 3.1 V IO。Power Dissipation：150 mW(operating)， 650 mW(during shutter event)， 4 mW(standby)

Description。The SparkFun Artemis Development Kit is the latest board to be released around the SparkFun Artemis Module and it allows access to more software development features than previous Artemis based boards. This Kit includes the SparkFun Artemis DK board as well as the accessories(Himax camera USB-C cable)needed to get started right away. Recommended software used to program the Artemis DK are the Arduino IDE， Arm(R)Mbed(TM)OS(Studio and CLI)， and AmbiqSDK. An updated USB interface(MKL26Z128VFM4 Arm(R)Cortex(R)-M0+ MCU， from NXP)allows the Artemis Dev Kit to act as：Mass Storage Device(MSD)：Used to provide drag and drop programming to the Artemis Module.。Human Interface Device(HID)：Used for the debugging interface to the Artemis Module.。Communication Port(COM)：Used to provide a serial communication UART between the Artemis and the USB connection(PC).。The Artemis Module provides a Cortex(R)-M4F with BLE 5.0 running at 48MHz with an available 96MHz turbo mode and power as low as 6uA per MHz(less than 5mW). The SparkFun Artemis Module is fully FCC/IC/CE certified with 1M flash and 384k RAM you'll have plenty of room for your code. The flexibility of the Artemis module starts with our Arduino core. You can program and use the Artemis module just like you would an Uno or any other Arduino. Additional functionality stems from the ability of the Artemis Dev kit to run RTOS such as the Arm Mbed OS， or the AmbiqSDK.。Attached to the。"Qwiic"。I2C bus， we've added a LIS2DH12TR MEMS accelerometer(for things like gesture recogntion)， a digital MEMS microphone， and an edge camera connector for the Himax CMOS imaging camera to experiment with always-on voice commands， and image recognition with TensorFlow and machine learning. All of the Artemis Development Kit pins are broken out to 0.1" spaced female headers(i.e. connectors). There are also two rows of breakout pins with 0.1" pitch spacing for headers； and a 0.08" pitch spacing to clip on IC-hooks， used by most logic analyzers. Additionally the Silk on the back of the Artemis DK acts as a chart to show pins by functionality(peripherals， ADC， PWM， UART0， UART1)and act as an aid while developing software. The board is powered programmed via USB-C， and includes a Qwiic connector to make I2C easy and is fully compatible with SparkFun's Arduino core to be programmed under the Arduino IDE.。Get Started With the SparkFun Artemis Development Kit Guide。Features。Artemis Dev Kit。Compatible with Arduino， Mbed(TM)OS， and AmbiqSDK Development Programs。Power：5V Provided Through the USB-C Connector。1.8V， 3.3V， and 5V Available on Power Header。Interface Chip(MKL26Z128VFM4 ARM(R)Cortex(R)-M0+ MCU)：Drag and Drop Programming。SWD Interface。JTAG Programming PTH。Artemis Module：Apollo3 ARM(R)Cortex(R)-M4F MCU。BLE 5.0 with FCC Certification。24 Breakout I/O Pins。Eight 14-bit ADC Pins。Eighteen 16-bit PWM Pins。Two Independent UART Ports。Three Peripheral I2C/SPI Buses。JTAG Programming PTH。Sensors：3-axis Accelerometer(LIS2DH12)。PDM Microphone(SPH0641LM4H-1)。Camera Connector(for the Himax HM01B0 Camera)。Qwiic Connector。On Primary I2C Bus。Himax HM01B0 Camera。Image Sensor。Ultra Low Power Image Sensor(ULPIS)designed for Always On vision devices and applications。High sensitivity 3.6μ BrightSenseTM pixel technology。320×320 active pixel resolution with support for QVGA window， vertical flip and horizontal mirror readout。Programmable black level calibration target， frame size， frame rate， exposure， analog gain(up to 8x)and digital gain(up to 4x)。Automatic exposure and gain control loop with support for 50 / 60Hz flicker avoidance。Flexible 1bit， 4bit and 8bit video data interface with video frame and line sync。Motion Detection circuit with programmable ROI and detection threshold with digital output to serve as an interrupt。On-chip self oscillator。I2C 2-wire serial interface for register access。High CRA for low profile module design。Sensor Parameters。Active Pixel Array 320×320。Pixel Size 3.6 μm×3.6 μm。Full Image Area 1152 μm×1152 μm。Diagonal(Optical Format)1.63 mm(1/11″)。Color Filter Array Monochrome and Bayer。Scan Mode：Progressive。Shutter Type：Electronic Rolling Shutter。Frame Rate MAX 51 fps @ 320×320， 60 fps @ 320×240(QVGA)。CRA(maximum)30℃。Sensor Specifications。Supply Voltage：Analog - 2.8 V， Digital - 1.5V(Internal LDO：1.5V - 2.8V)， I/O - 1.5 - 2.8V。Input Reference Clock：3 - 50 MHz。Serial Interface(I2C)：2-wire， 400 KHz max.。Video Data Interface：1b， 4b， 8b with frame / line SYNC。Output Clock Rate MAX：50 MHz for 1bit， 12.5 MHz for 4bit， 6.25 MHz for 8bit。Est. Power Consumption(include IO with 5pF load)：QVGA 60FPS(Typical)<4 mW。QVGA 30FPS(Typical)<2 mW

Description。Note - Please read before purchasing!：The SparkFun LTE GNSS Breakout - SARA-R5 uses the "00B" product version of the SARA-R5 module(specifically the SARA-R510M8S-00B-00). LTE NB-IoT Radio Access Technology， and the LTE FDD bands：66， 71， 85 are not supported by this version. Refer to the SARA-R5 datasheet for more information.。The SparkFun SARA-R5 LTE GNSS Breakout is a robust development tool for u-blox's impressive SARA-R510M8S module. The SARA-R510M8S combines u-blox's UBX-R5 cellular chipset with their M8 GNSS receiver chipset to provide a 5G-Ready wireless IoT device complete with positioning data all on a single chip. As an asset tracker， the LTE GNSS Breakout offers Secure Cloud LTE-M communication for multi-regional use and has an integrated u-blox M8 GNSS receiver for accurate positioning information.。The UBX-R5 chipset supports many different forms of data communication from full TCP/IP sockets and packet switched data， through HTTP Get/Put/Post， FTP(the SARA has a built-in file system)， Ping， to good old SMS text messaging! The built-in u-blox M8 GNSS receiver provides accurate and reliable positioning with a separate GNSS antenna interface for an external antenna. Both the GNSS antenna and LTE connections are made via a pair of SMA connectors.。This breakout routes nearly all of the functional pins on the SARA-R510M8S module to user interfaces(USB or plated-through hole)so you can take full advantage of all of the features available on this impressive LTE/GNSS module. The SARA-R5's UART interface can be configured into one of five variants， providing connectivity over one or two UARTs. A separate USB port provides access to the SARA's trace log for diagnostic purposes. This breakout provides access to all three interfaces(UART1， UART2 and SARA Diag)via three separate USB-C connections. All eight 3.3V serial signals are available on a 0.1"-pitch breakout header. Separate 0.1"-pitch headers break out the SARA's I2C bus， power pins as well as GPIO pins for various functionalities.。Get Started with the SARA-R5 LTE GNSS Breakout Guide。Features。u-blox SARA-R510M8S module providing Secure Cloud LTE-M data communication for multi-regional use。Please check that your service provider offers LTE-M coverage for your area before purchasing。Integrated u-blox M8 GNSS receiver for accurate positioning information。Nano SIM socket。Separate， robust SMA connections for LTE and GNSS antennas。Switchable 3.3V power for an active GNSS antenna。USB-C connectivity。LED indicators for：Power(VIN and 3.3V)。SARA-R5 on。Network indicator。GNSS timing pulse(1PPS)。3.3V plated through-hole(PTH)pins for：SARA on。Network indicator。UART1。GNSS timing pulse(1PPS)。I2C bus

。Description。Product Restrictions：To access certain features of the ATECC608A， users will need to contact Microchip and sign an NDA contract to obtain the complete datasheet. Due to the required NDA - technical support， an Arduino library， and hookup guide are not provided for users on this product.。The SparkFun ATECC608A Cryptographic Co-processor Breakout allows you to add strong security to your IoT node， edge device， or embedded system. This includes。a。symmetric。authentication，。symmetric。AES-128 encryption/decryption， and much more. As stated above， the ATECC608A has limited Arduino support and the complete datasheet is under NDA with Microchip.。This breakout board includes two Qwiic ports for plug and play functionality. Utilizing our handy Qwiic system， no soldering is required to connect it to the rest of your system. However， we still have broken out 0.1"-spaced pins in case you prefer to use a breadboard. The ATECC608A chip is capable of many cryptographic processes， including， but not limited to：Creating and securely storing unique asymmetric key pairs based on Elliptic Curve Cryptography(FIPS186-3).。AES-128：Encrypt/Decrypt， Galois Field Multiply for GCM。Creating and verifying 64-byte digital signatures(from 32-bytes of message data).。Creating a shared secret key on a public channel via Elliptic Curve Diffie-Hellman Algorithm.。SHA-256 HMAC Hash including off-chip context save/restore。Internal high quality FIPS random number generator.。Embedded in the chip is a 10Kb EEPROM array that can be used for storing keys， certificates， data， consumption logging， and security configurations. Access to the sections of memory can then be restricted and the configuration locked to prevent changes. Each ATECC608A Breakout ships with a guaranteed unique 72-bit serial number and includes several security features to prevent physical attacks on the device itself， or logical attacks on the data transmitted between the device.。A summary datasheet for the ATECC608A is available here. The full datasheet is under NDA with Microchip. You will need to contact them for access to the entire datasheet. Meanwhile， the ArduinoATECCX08 Library currently only supports the ATECC608A with SAMD21 Arduino boards.。We do have much more support for the ATECC508A version of this chip. Please check out our ATECC508A Hookup Guide and Arduino Library(which includes six examples). This will get you familiar with the basics of elliptic curve cryptography and signing/verifying data with the ATECC508A version of the chip.。Note：The I2C address of the ATECC608A is 0x60 and is software-configurable to any address. A multiplexer/Mux is required to communicate to multiple ATECC608A sensors at the default address when on a single bus. If you need to use more than one ATECC608A sensor at the default address， consider using the Qwiic Mux Breakout.。Note：The ATECC608A can be only configured once before it is。PERMANENTLY。locked。. It is advisable that users purchase multiple boards in order to use other configurations and explore the advanced functions of the ATECC608A.。Additionally， this board。IS。capable of encrypting and decrypting data. However， to access these additional features， you will need to contact Microchip and sign an NDA contract to obtain the complete datasheet.。It is recommended that an SparkFun RedBoard Turbo - SAMD21 Development Board is used with this product due to the buffer size required on the I2C bus.。The SparkFun Qwiic Connect System is an ecosystem of I2C sensors， actuators， shields and cables that make prototyping faster and less prone to error. All Qwiic-enabled boards use a common 1mm pitch， 4-pin JST connector. This reduces the amount of required PCB space， and polarized connections mean you can't hook it up wrong.。。Features。Operating Voltage：2.0V-5.5V(。Default on Qwiic System：3.3V。)。Active Current Draw(for ATECC608A)：16 mA。Sleep Current(for ATECC608A)：<150 nA。Guaranteed Unique 72-bit Serial Number。10 Kb EEPROM Memory for Keys， Certificates， and Data。Storage for up to 16 Keys。256-bit Key Length。Internal High-Quality FIPS Random Number Generator(RNG)。Configurable I2C Address(7-bit)：0x60(。Default。)

Make!Sense is an easy-to-use platform for making learning fun and interactive. It's a universal interface system that allows you to quickly and easily connect different types of sensors to your computer or smart phone. You can use Make!Sense to observe mo

。IEC Appliance Inlet C14 with Filter 2-Stages， Fuseholder 1- or 2-pole， Line Switch 2-pole.Panel mount: Snap-in or screw-on mounting from front side 4 Functions: Appliance Inlet Protection class I， Line Switch 2-pole， Fuseholder for fuse-links 5 x 20 mm 1 or 2 pole， 2-Stages line filter in standard and medical version V-Lock notch standard Quick connect terminals 6.3 x 0.8 mm Unique Selling Proposition Most compact power entry module with 2-stages filter Attractive flat design Various mounting options V-Lock cord retaining Characteristics Ultra-compact design。Ideal for low profile designs Aluminium case provides good shielding All single elements are already wired Ideal for application with high transient loads

IEC Appliance Inlet C14 with Filter， Fuseholder 1- or 2-pole， Line Switch 2-pole.Panel mount: Screw-on from front side 4 Functions: Appliance Inlet Protection， Line Switch 2-pole， Fuseholder for fuse-links 5 x 20 mm 1 or 2 pole， Line filter in standard and medical version V-Lock notch standard Quick connect terminals 6.3 x 0.8 mm Unique Selling Proposition Various mounting options Attractive flat design Switch for highest inrush current V-Lock cord retaining Characteristics Ultra-compact design。Ideal for low profile designs Aluminium case provides good shielding All single elements are already wired Ideal for application with high transient loads Suitable for use in equipment Suitable for use in medical equipment

IEC Appliance Inlet C14 with Filter， Fuseholder 1- or 2-pole， Line Switch 2-pole.Panel mount: Screw-on from front side 4 Functions: Appliance Inlet Protection， Line Switch 2-pole， Fuseholder for fuse-links 5 x 20 mm 1 or 2 pole， Line filter in standard and medical version V-Lock notch standard Quick connect terminals 6.3 x 0.8 mm Unique Selling Proposition Various mounting options Attractive flat design Switch for highest inrush current V-Lock cord retaining Characteristics Ultra-compact design。Ideal for low profile designs Aluminium case provides good shielding All single elements are already wired Ideal for application with high transient loads Suitable for use in equipment Suitable for use in medical equipment

IEC Appliance Inlet C14 with Filter 2-Stages， Fuseholder 1- or 2-pole， Line Switch 2-pole.Panel mount: Snap-in or screw-on mounting from front side 4 Functions: Appliance Inlet Protection class I， Line Switch 2-pole， Fuseholder for fuse-links 5 x 20 mm 1 or 2 pole， 2-Stages line filter in standard and medical version V-Lock notch standard Quick connect terminals 6.3 x 0.8 mm Unique Selling Proposition Most compact power entry module with 2-stages filter Attractive flat design Various mounting options V-Lock cord retaining Characteristics Ultra-compact design。Ideal for low profile designs Aluminium case provides good shielding All single elements are already wired Ideal for application with high transient loads