学童・教育用品 ：「SOLEX」の検索結果

レスポールの美しさと重厚なサウンドを守る、クラシックな風格のハードウッドケース。・Gibson Les Paulなどのシングルカッタウェイ・エレキギターに対応した専用設計・耐湿性・耐衝撃性に優れたブラックTolex PVCレザー外装・超耐久性の合板構造で長期使用にも安心・厚手のプラッシュライニングがギターを優しく保護・ネックサポート付きで安定した収納を実現・広々としたアクセサリー収納スペースで小物も整理可能・人間工学に基づいた快適なグリップのキャリーハンドル・クロムメッキのロック可能なラッチで安全性を強化・GatorのGWEシリーズに属するベストセラーモデル・型番：GWE-LPS-BLK・JANコード：0716408506470・対応ギター：Gibson Les Paul/シングルカッタウェイタイプのエレキギター・外装：ブラックTolex PVCレザー(耐湿性・耐衝撃性)・内装：厚手プラッシュライニング+ネックサポート・構造：アーチトップ合板製(ラミネートウッド)・内寸：全長 約101.6cm(40インチ)/ボディ長 約54cm(21.25インチ)/ボディ下部幅 約35.6cm(14インチ)/くびれ部幅 約24.8cm(9.75インチ)/ボディ上部幅 約25.4cm(10インチ)/厚み 約7cm(2.75インチ)・重量：約4.5kg(推定)・付属機能：ロックラッチ、アクセサリーポケット、パッド入りハンドルGWE-LPS-BLKは、ギグバッグでは不安なプレイヤーに向けた、信頼性の高いハードケースです。レスポールの重厚なボディと繊細なネックをしっかり守り、日常の持ち運びから長期保管まで安心して使える理想的な選択肢です。クラシックな外観と実用性を兼ね備え、プロフェッショナルにも選ばれる一台です。

セミホロウギターの魅力をそのままに、堅牢な保護とクラシックな美しさを兼ね備えたハードウッドケース。・Gibson ES-335などのセミホロウスタイルギターに対応した専用設計・耐久性の高い合板構造にブラックTolex PVCレザーをラミネート加工・厚手のプラッシュライニングが衝撃から楽器をしっかり保護・ネックサポート付きで安定した収納を実現・広々としたアクセサリー収納スペースで小物も整理可能・人間工学に基づいた快適なグリップのキャリーハンドル・クロムメッキのロック可能なラッチで安全性を強化・GatorのGWEシリーズに属するベストセラーモデル・型番：GWE-335・JANコード：0716408522005・対応ギター：Gibson ES-335などのセミホロウタイプ・外装：ブラックTolex PVCレザー(耐湿性・耐衝撃性)・内装：厚手プラッシュライニング+ネックサポート・構造：アーチトップ合板製(ラミネートウッド)・内寸：全長 約110.5cm/ボディ長 約57.4cm/ボディ上部幅 約30.2cm/くびれ部幅 約24.9cm/ボディ下部幅 約40.4cm/厚み 約10.8cm・重量：約5.4kg・付属機能：ロックラッチ、アクセサリーポケット、パッド入りハンドルGWE-335は、ギグバッグでは不安なプレイヤーに向けた、信頼性の高いハードケースです。セミホロウギターの繊細な構造をしっかり守りながら、日常の持ち運びや長期保管にも対応。クラシックな外観と実用性を兼ね備えた、プロフェッショナルにも選ばれる一台です。

レスポールの重厚なボディを、クラシックな風格でしっかり守るデラックスウッドケース。Gator GW-LPSは、Gibson Les Paulなどのシングルカッタウェイ・エレキギターに対応したDeluxe Wood Seriesのハードケースです。耐久性の高い5層合板構造にブラックTolex PVCラミネート加工を施した外装は、湿気や衝撃に強く、長期使用にも安心。内部は厚手のフォームパッドとプラッシュライニングで楽器を優しく保護し、ネックサポートとアクセサリーポケットも完備。ロック可能なクロムメッキラッチと人間工学に基づいたパッド入りハンドルで、持ち運びと安全性を両立します。型番：GW-LPS / Deluxe Wood CaseJANコード：0716408500928対応楽器：Gibson Les Paulなどのシングルカッタウェイ・エレキギター外装：ブラックTolex PVC(耐湿性・耐衝撃性)内装：厚手フォームパッド+プラッシュライニング+ネックサポート構造：5層合板製ハードシェル内寸：全長 約106.7cm/ボディ長 約52.8cm/ボディ上部幅 約25.4cm/くびれ部幅 約24.1cm/ボディ下部幅 約35.6cm/厚み 約7.6cm重量：約4.2kg(推定)付属機能：ロックラッチ、アクセサリーポケット、パッド入りハンドルGW-LPSは、ギグバッグでは不安なプレイヤーに向けた、信頼性とスタイルを兼ね備えた理想的な選択肢です。ステージから保管まで、プロから趣味の演奏者まで幅広く支持されるベストセラーモデルです。

DescriptionThe Elektor MIT App Inventor Bundle is a kit built to help learn about developing apps for Android compatible mobile devices using the MIT App Inventor online development environment. MIT App Inventor projects can be in either standalone mode or use an external processor. In standalone mode， the developed application runs only on the mobile device(e.g. Android). In external processor-based applications， the mobile device communicates with an external microcontroller-based processor， such as Raspberry Pi， Arduino， ESP8266， ESP32， etc.The kit comes with a book and a selection of parts that correspond with a number of projects. Check out the features and Includes tab for more information.FeaturesProjects Include：Using the text-to-speech componentIntonating a received SMS messageSending SMS messagesMaking telephone calls using a contacts listUsing the GPS and Pin-pointing our location on a mapSpeech recognition and speech translation to another languageControlling multiple relays by speech commandsProjects for the Raspberry Pi， ESP32 and Arduino using Bluetooth and Wi-FiMIT APP Inventor and Node-RED projects for the Raspberry Pi

DescriptionIntroducing the SparkFun FT231X Breakout board， complete with the full UART hardware handshake feature! The pin-out of this board matches the FTDI cable to work with official Arduino and cloned Arduino boards. It can also be used for general serial applications.This board still brings out the DTR pin as opposed to the RTS pin of the FTDI cable. The DTR pin allows an Arduino target to auto-reset when a new Sketch is downloaded. This is a really nice feature to have and allows a sketch to be downloaded without having to hit the reset button. This board will auto-reset any Arduino board that has the reset pin brought out to a 6-pin connector.The coolest thing about the FT231X Breakout is that we have broken out ALL the pins for your use， making this board all the more hackable! It also uses a common microUSB jack.One of the features of this board is a jumper on the back， which allows the VCC output to be configured to either 3.3V or 5V. This board ships default to 5V， but you can cut the default trace and add a solder jumper if you need to switch to 3.3V. It should be noted that the max input of the FT231X is only 3.3V， but it can operate down to 1.8V with external pull-ups and is also 5V tolerant.

DescriptionGet with the times， already! This SparkFun Real Time Clock(RTC)Module is a Qwiic-enabled breakout board for the RV-1805 chipset. The RTC is ultra-low power(running at only about 22nA in its lowest power setting)so it can use a supercapacitor for backup power instead of a normal battery. This means you get plenty of charge and discharge cycles without any degradation to the "battery." To make it even easier to get your readings， all communication is enacted exclusively via I2C， utilizing our handy Qwiic system so no soldering is required to connect it to the rest of your system. However， we still have broken out 0.1"-spaced pins in case you prefer to use a breadboard.This RTC module's built in RV-1805 has not one， but two internal oscillators：a 32.768kHz tuning fork crystal and a low power RC based oscillator and can automatically switch between the two using the more precise crystal to correct the RC oscillator every few minutes. This feature allows the module to maintain a very accurate date and time with the worst case being +/- about three minutes over a year. The RV-1805 also has a built in trickle charger so as soon as the RTC is connected to power the it will be fully charged in under 10 minutes and has the ability to switch power to other systems allowing it to directly turn on or off a power hungry device such as a microcontroller or RF engine.There is also the option to add a battery to the board if the supercapacitor just isn't going keep your project powered long enough(keep in mind， the supercap can hypothetically make the board keep time for around 35 days)， you can solder on an external battery. That means you can let board sit with no power or connection to the outside world and the current hour/minute/second/date will be maintained.Note：The I2C address of the RV-1805 is 0x69 and is hardware defined. A multiplexer/Mux is required to communicate to multiple RV-1805 sensors on a single bus. If you need to use more than one RV-1805 sensor consider using the Qwiic Mux Breakout.The SparkFun Qwiic connect system is an ecosystem of I2C sensors， actuators， shields and cables that make prototyping faster and less prone to error. All Qwiic-enabled boards use a common 1mm pitch， 4-pin JST connector. This reduces the amount of required PCB space， and polarized connections mean you can't hook it up wrong.Get Started with the RV-1805 Real Time Clock Module GuideFeaturesOperating Voltage(Startup)：1.6V - 3.6VOperating Voltage(Timekeeping)：1.5V - 3.6VOperating Temperature：-40℃ - 85℃Time Accuracy：±2.0 ppmCurrent Consumption：22nA(Typ.)I2C Address：0xD2Supercapacitor for Backup Power2x Internal Oscillators2x Qwiic Connectors

DescriptionThe new PureThermal Mini Pro JST-SR with Thermal by FLIR is a hackable thermal camera for the FLIR Lepton thermal imaging camera core. Just like its PureThermal 2 predecessor， it ships pre-configured to operate as a plug-and-play UVC 1.0 USB thermal webcam that will work with standard webcam and video apps on all major platforms using a JST-SR to USB Cable， or your own custom cable. For developers， its reference firmware and viewer software are open source.It has multiple connection options such as solder straight to the board or a custom cable using the JST-SR port. The PTMini Pro also features four mounting holes， less complex circuitry， and perhaps best of all， USB DFU. This is a development kit ready to be embedded into a production system.Each board comes with a FLIR Lepton 3.5.The FLIR Lepton(R)is a radiometric-capable LWIR camera solution that is smaller than a dime， fits inside a smartphone， and is one tenth the cost of traditional IR cameras. Using focal plane arrays of either 160x120 or 80x60 active pixels， Lepton easily integrates into native mobile-devices and other electronics as an IR sensor or thermal imager. The radiometric Lepton captures accurate， calibrated， and noncontact temperature data in every pixel of each image.FeaturesPureThermal：Compatible with all production FLIR Leptons， including radiometric 2.5 and 3.5 cores9 Hz color video over usb using the USB UVC classSTM32F412 ARM microprocessor - execute on-board image processing without need for an external systemOpen source reference firmware：GroupGets PureThermal GithubWorks with GetThermal - our custom open source thermal video display software for macOS and Linux with radiometric supportDFU over USB using a JST-SR port to USB cable， or a modified USB cable and the through holes.Four mounting holesCompact form-factor ready to be embedded into production systemsFLIR Lepton 3.5：Thermal sensitivity：< 50 mK(0.050℃)Spectral Range：8 - 14 microns(nominal)Long Wave Infrared(LWIR)Resolution：160h×120v pixelsRadiometric Accuracy - High Gain Mode：Greater of +/- 5℃ or 5%(typical)； Low Gain Mode：Greater of +/- 10℃ or 10%(typical)Scene Dynamic Range - High Gain Mode：-10° to +140℃； Low Gain Mode：-10° to +400℃(at room temperature)， -10° to +450℃(typical)Pixel Size：12 micrometersFrame Rate：8.7 Hz(effective)Output Format：User-selectable 14-bit， 8-bit(AGC applied)， or 24-bit RGB(AGC and colorization applied)Horizontal Field of View(HFOV)：57°Lens Type：f/1.1Size(w×l×h)：10.50×12.70×7.14 mmWeight：0.9 gramsPower Consumption：150 mW typical， 650 mW during shutter event， 5mW standbyOptimum Operating Temperature Range：-10℃ to + 80℃

DescriptionThese inserts are great for easy and flexible work holding solutions. You could strategically place a few to hold down material in a jig or fixture， or install in a grid pattern to turn your wasteboard into a threaded table by installing t

DescriptionJumper wires are awesome. Just a little bit of stranded core wire with a nice solid pin connector on either end. They have the flexibility of stranded wire but will fit directly into breadboards and female pin headers. These are six inch long， 26 AWG jumper wires with breadboard-friendly male connectors on both ends. Combine these with our female to female jumpers to create a male to female jumper. Multiple jumpers can be connected next to one another on a 0.1in header.These jumper wires can be used for pretty much everything! They work great with breadboards， Arduinos， and really any 0.1in pitch prototyping board.Features6in. long26 AWG

DescriptionThese inserts are great for easy and flexible work holding solutions. You could strategically place a few to hold down material in a jig or fixture， or install in a grid pattern to turn your wasteboard into a threaded table by installing these threaded inserts.Installation is easy， simply create a 9mm pilot hole， then thread the insert into the hole.Both the inch and metric come in packs of 100 inserts and include a 6mm hex key and 6mm hex driver for installation. The hex driver can be used with a cordless drill for quick installation.Features6mm Hex(on both Imperial and Metric versions)Length：13mm(～1/2")Maximum Hole Size：9mm(0.354"， Letter T Drill)1/4-20 thread

DescriptionThe SparkFun TFT LCD Breakout is a versatile， colorful， and easy way to experiment with graphics or create a user interface for your project. With a 4-wire SPI interface and microSD card holder， you can use this breakout to easily add visual display/interface capabilities to a project as well as providing all the storage you might need for multimedia files.To get started with this breakout， you will need an Arduino compatible microcontroller of your choice - we recommend something with extra RAM like the SparkFun Thing Plus. The breakout can be powered with either 5V or 3.3V. The microSD card holder is connected to the same SPI bus as the display which keeps the required pin count low and exists to relieve the burden from your microcontroller's poor memory due to having to store hundreds of images of cats， or really whatever you want to keep there. We have also gone ahead and tricked out the SparkFun HyperDisplay library with a driver made especially for this breakout!Out of the box， the SparkFun TFT LCD Breakout will come with a large backing PCB that makes it easy to securely mount the display in a project. If you need a more flexible solution you can remove the display module， snap off half the backing board， and then re-insert the display module. When this is done you'll be left with the bare minimum frame around the display to more seamLessly integrate with your project.Get Started With the SparkFun TFT LCD Breakout GuideFeatures128×160 RGB pixelsUp to 18 bit configurable color depth2x PWM controllabele LED backlightmicroSD Card SlotV-Score for Minimal Footprint Setup

DescriptionJumper wires are awesome. Just a little bit of stranded core wire with a nice solid pin connector on either end. They have the flexibility of stranded wire but will fit directly into breadboards and female pin headers. These are 6 inch long

DescriptionThe FLIR Lepton(R)2.5 - Thermal Imaging Module is a radiometric-capable long wave infrared(LWIR)camera solution that is smaller than a dime， fits inside a smartphone， and is less expensive than traditional IR cameras. With a focal plane array of 80x60 active pixels， this Lepton easily integrates into native mobile-devices and other electronics as an IR sensor or thermal image sensor. The radiometric Lepton captures accurate， calibrated， and non-contact temperature data in every pixel.For large quantities：We currently have a limit of one per customer order on the FLIR Lepton 2.5 module due to supply chain issues as a result of COVID-19. If you need to place a distributor order please contact your sales rep and they will assist you. For bulk order for this module please visit our Volume Pricing Page for inquiries of stock. At this time， we cannot guarantee orders for this module but we will do what we can to work with you in fulfilling your request.FeaturesEffective Frame Rate：8.6 Hz(commercial application exportable)Input Clock：25-MHz nominal， CMOS IO Voltage LevelsOutput Format：User-selectable 14-bit， 8-bit(AGC applied)， or 24-bit RGB(AGC and colorization applied)Pixel Size：17 μmRadiometric Accuracy：High gain：Greater of +/- 5℃ or 5%(typical)Low gain：Greater of +/- 10℃ or 10%(typical)Scene Dynamic Range：-10-140 ℃(high gain)； up to 450℃(low gain)typicalSpectral Range：Longwave infrared， 8 μm to 14 μmTemperature Compensation：Automatic. Output image independent of camera temperature.Thermal Sensitivity：<50 mK(0.050° C)Video Data Interface：Video over SPIControl Port：CCI(I2C-like)， CMOS IO Voltage LevelsPackage Dimensions - Socket Version(w×l×h)：11.8×12.7×7.2 mmMechanical Interface：32-pin socket interface to standard Molex(R)socketNon-Operating Temperature Range：-40 ℃ to +80 ℃Optimum Temperature Range：-10℃ to +80℃Shock：1500 G @ 0.4 msArray format：80×60， progressive scanFOV - Diagonal：63.5°FOV - Horizontal：50°(nominal)Image Optimization：Factory configured and fully automatedNon-Uniformity Correction(NUC)：Automatic with shutterSensor Technology：Uncooled VOx microbolometerSolar protection：IntegralInput Supply Voltage：2.8 V， 1.2 V， 2.5 V to 3.1 V IOPower Dissipation：150 mW(operating)， 650 mW(during shutter event)， 4 mW(standby)